Skip to Content
The store will not work correctly when cookies are disabled.
JavaScript seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Javascript in your browser.
2+ Cylinder Capacity - Cylinder Carts and Dollies
2 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Cart
USA Safety Model#: GCMDE2SC
Cylinder capacity: 2
Supported cylinder sizes: D, E (4.5" diameter)
Weight capacity: 250 lbs
Cart dimensions (WxDxH):
15.5"w
x
8"d x 35"h
Oxygen Tank Cart Features:
Holds oxygen and other small medical gas tanks
Two 8" semi-pneumatic wheels (1.75" wide)
Handle height is approximately 35"
5" square cylinder opening
Cylinders sit approximately 5.5" off of the ground
All welded steel construction
Welded steel supports
Powder coated green finish
4 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Cart
USA Safety Model#: GCMDE4SC
Cylinder capacity: 4
Supported cylinder sizes: D, E (4.5" diameter)
Weight capacity: 250 lbs
Cart dimensions (WxDxH):
12"w
x
12"d x 35"h
Oxygen Tank Cart Features:
Holds oxygen and other medical gas tanks
Two 8" semi-pneumatic wheels (1.75" wide)
Handle height is approximately 35"
5" square cylinder opening
Cylinders sit approximately 5.5" off of the ground
All welded steel construction
Welded steel supports
Powder coated green finish
Cylinders not included
Made in the USA
4 Cylinders - Oxygen & Medical Gases (D,E) - Red - Cylinder Cart
USA Safety Model#: GCMDE4RSC
Cylinder capacity: 4
Supported cylinder sizes: D, E (4.5" diameter)
Weight capacity: 250 lbs
Cart dimensions (WxDxH):
12"w
x
12"d x 35"h
Oxygen Tank Cart Features:
Holds oxygen and other medical gas tanks
Two 8" semi-pneumatic wheels (1.75" wide)
Handle height is approximately 35"
5" square cylinder opening
Cylinders sit approximately 5.5" off of the ground
All welded steel construction
Welded steel supports
Powder coated red finish
Cylinders not included
Made in the USA
6 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Cart
USA Safety Model#: GCMDE6SC
Cylinder capacity: 6
Supported cylinder sizes: D, E (4.5" diameter)
Weight capacity: 250 lbs
Cart dimensions (WxDxH):
18.5"w
x
21.5"d x 35"h
Oxygen Tank Cart Features:
Holds oxygen and other medical gas tanks
Two 8" semi-pneumatic wheels (1.75" wide)
Handle height is approximately 35"
5" square cylinder opening
Cylinders sit approximately 5.5" off of the ground
All welded steel construction
Welded steel supports
Powder coated green finish
2 Cylinders - Green - Gas Cylinder Dolly
USA Safety Model#: HT75020SC
Dolly capacity: 2 cylinders
Diameters supported: Up to 9.5" each
Weight capacity: 400 lb
Dolly dimensions (WxDxH):
20"w
x
27"d x 49"h
Cylinder Dolly Features:
OSHA, NFPA (UFC) & CGA compliant
Constructed from steel with sturdy bracing
10" semi-pneumatic wheels with steel hubs with ball bearings (10" x 2.75")
Continuous handle
Chains to secure cylinders
Powder coated green
Industrial, medical and commercial use
Made in the USA
6 Cylinders - Oxygen & Medical Gases (D,E) - Red - Cylinder Cart
USA Safety Model#: GCMDE6RSC
Cylinder capacity: 6
Supported cylinder sizes: D, E (4.5" diameter)
Weight capacity: 250 lbs
Cart dimensions (WxDxH):
18.5"w
x
21.5"d x 35"h
Oxygen Tank Cart Features:
Holds oxygen and other medical gas tanks
Two 8" semi-pneumatic wheels (1.75" wide)
Handle height is approximately 35"
5" square cylinder opening
Cylinders sit approximately 5.5" off of the ground
All welded steel construction
Welded steel supports
Powder coated red finish
2 Cylinders - Tool Tray - Green - Welding Cart
USA Safety Model#: HT40114SC
Welding cart capacity: 2 cylinders
Cylinder diameters supported: Up to 12.5" (fuel) & 9.5" (oxygen)
Weight capacity: 500 lbs
Cylinder Carts dimensions (WxDxH):
31"w
x
13.5"d x 46"h
Cylinder Dolly Features:
OSHA, NFPA (UFC) & CGA compliant
3" high tool tray for holding equipment
14" semi-pneumatic wheels with steel hubs complete with 3/4" ball bearings (wheel dimensions 14" x 1.75")
Continuous handle
Chains to secure cylinders
Powder coated for durability
Made in the USA
2 Cylinders - Flat Free Tires - Green - Gas Cylinder Dolly
USA Safety Model#: HT75120SC
Dolly capacity: 2 cylinders
Diameters supported: Up to 9.5" each
Weight capacity: 400 lb
Dolly dimensions (WxDxH):
22"w
x
27"d x 49"h
Cylinder Dolly Features:
OSHA, NFPA (UFC) & CGA compliant
Constructed from steel with sturdy bracing
10" pneumatic wheels, steel hubs, no-flat sealant (10" x 4")
Continuous handle
Chains to secure cylinders
Powder coated green
Industrial, medical and commercial use
Made in the USA
1 Propane Tank - Flat-Free Tires - Green - Cylinder Dolly
USA Safety Model#: HT75110PSC
Dolly capacity: 1 tank (33lb, 43lb, or 100 lb) or stack up to 2 tanks (33lb or 43lb only)
Diameters supported: Up to 16"
Weight capacity: 600 lb
Dolly dimensions (WxDxH):
26"w
x
17.5"d x 52"h
Cylinder Dolly Features:
Hold one 33lb, 43lb, or 100lb propane tank or stack two 33lb or 43lb tanks
OSHA, NFPA (UFC) & CGA compliant
Constructed from steel with sturdy bracing
10" pneumatic tires with steel hubs and no flat sealant (wheel dimensions 10" x 4")
Continuous handle
Two chains included to secure cylinders
Powder coated for durability
Industrial, medical and commercial use
Made in the USA
12 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Cart
USA Safety Model#: GCMDE12SC
Cylinder capacity: 12
Supported cylinder sizes: D, E (4.5" diameter)
Weight capacity: 2400 lbs
Cart dimensions (WxDxH):
29"w
x
17"d x 42"h
Oxygen Tank Cart Features:
Holds oxygen and other medical gas tanks
4 ultra-quiet 4" casters (2 rear swivel with break and 2 rigid casters)
Handle height is approximately 35"
5" square cylinder opening
Cylinders sit approximately 5.5" off of the ground
All welded steel construction
Welded steel supports
Powder coated green finish
2 Cylinders - Steering Casters - Green - Gas Cylinder Dolly
USA Safety Model#: HT750203RCSC
Dolly capacity: 2 cylinders
Diameters supported: Up to 9.5" each
Weight capacity: 400 lb
Dolly dimensions (WxDxH):
20"w
x
27"d x 48"h
Cylinder Dolly Features:
OSHA, NFPA (UFC) & CGA compliant
Constructed from steel with sturdy bracing
10" semi-pneumatic wheels with steel hubs with ball bearings (10" x 2.75")
Front 3 Ply Rotacasters
Continuous handle
Chains to secure cylinders
Powder coated green
Industrial, medical and commercial use
Made in the USA
2 Cylinders - Gas Cylinder Dolly
USA Safety Model#: HT952FS
Dolly capacity: 2 cylinders
Cylinder diameter: Up to 12"
Weight capacity: 700 lbs
Dolly dimensions (WxDxH):
32.75"w
x
19.25"d x 48.25"h
Cylinder Dolly Features:
OSHA, NFPA (UFC) & CGA compliant
10.5" fully pneumatic wheels
3/16" steel supports and round steel tube
Constructed from 11 and 10 gauge HR steel
Cylinder dolly has polypropylene strap and cinch buckle
Fully welded construction
Quality powder-coat paint finish for long service life
Made in the USA
12 Cylinders - Oxygen & Medical Gases (D,E) - Red - Cylinder Cart
USA Safety Model#: GCMDE12RSC
Cylinder capacity: 12
Supported cylinder sizes: D, E (4.5" diameter)
Weight capacity: 2400 lbs
Cart dimensions (WxDxH):
29"w
x
17"d x 42"h
Oxygen Tank Cart Features:
Holds oxygen and other medical gas tanks
4 ultra-quiet 4" casters (2 rear swivel with break and 2 rigid casters)
Handle height is approximately 42"
5" square cylinder opening
Cylinders sit approximately 5.5" off of the ground
All welded steel construction
Welded steel supports
Powder coated red finish
2 Cylinders - Flat Free Tires - Gas Cylinder Dolly
USA Safety Model#: HT952FFFS
Dolly capacity: 2 cylinders
Cylinder diameter: Up to 12"
Weight capacity: 500 lbs
Dolly dimensions (WxDxH):
35"w
x
20"d x 47"h
Cylinder Dolly Features:
OSHA, NFPA (UFC) & CGA compliant
10.5" urethane flat free tires
3/16" steel supports and round steel tube
Constructed from 11 and 10 gauge HR steel
Cylinder dolly has polypropylene strap and cinch buckle
Fully welded construction
Quality powder-coat paint finish for long service life
Made in the USA
24 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Cart
USA Safety Model#: GCMDE24SC
Cylinder capacity: 24
Supported cylinder sizes: D, E (4.5" diameter)
Weight capacity: 2400 lbs
Cart dimensions (WxDxH):
34"w
x
22"d x 35"h
Oxygen Tank Cart Features:
Holds oxygen and other medical gas tanks
4 ultra-quiet 4" casters (2 rear swivel with break and 2 rigid casters)
Handle height is approximately 35"
5" square cylinder opening
Cylinders sit approximately 5.5" off of the ground
All welded steel construction
Welded steel supports
Powder coated green finish
2 Cylinders - Heavy Duty - Gas Cylinder Dolly
USA Safety Model#: HT991FS
Dolly capacity: 2 cylinders
Cylinder diameter: Up to 12"
Weight capacity: 1,000 lbs
Dolly dimensions (WxDxH):
35"w
x
24"d x 47"h
Cylinder Dolly Features:
OSHA, NFPA (UFC) & CGA compliant
16" fully pneumatic wheels
3/16" steel supports and round steel tube
Constructed from 11 gauge HR steel
Polypropylene strap and cinch buckle
Fully welded construction
Quality powder-coat paint finish for long service life
Made in the USA
2 Cylinders - Steering Casters - Heavy Duty - Green - Gas Cylinder Dolly
USA Safety Model#: HT751203RCSC
Dolly capacity: 2 cylinders
Diameters supported: Up to 9.5" each
Weight capacity: 600 lb
Dolly dimensions (WxDxH):
23"w
x
27"d x 48"h
Cylinder Dolly Features:
OSHA, NFPA (UFC) & CGA compliant
Constructed from steel with sturdy bracing
10" pneumatic wheels with steel hubs with ball bearings (10" x 4")
Front 3 Ply Rotacasters
Continuous handle
Chains to secure cylinders
Powder coated green
Industrial, medical and commercial use
Made in the USA
2 Cylinders - Rear Casters - Gas Cylinder Hand Truck
USA Safety Model#: HT953FS
Hand truck capacity: 2
Cylinder diameter: Up to 10"
Weight capacity: 1,000 lbs
Hand truck dimensions (WxDxH):
31.5"w
x
20"d x 47"h
Cylinder Hand Truck Features:
OSHA, NFPA (UFC) & CGA compliant
10.5" fully pneumatic wheels
Transport acetylene, argon, butane, carbon dioxide (CO2), helium, hydrogen and other gas cylinders
3" fold-away rear casters
3/16" steel supports and round steel tube
Constructed from 11 gauge HR steel
Polypropylene strap and cinch buckle
Fully welded construction
Quality powder-coat paint finish for long service life
Optional tool tray (Model # HT953TTFS ) available for purchase
Cylinder hand truck is made in the USA
Hand truck ships LTL Freight
2 Cylinders - Firewall - Narrow - Green - Welding Cart
USA Safety Model#: HT60010FWSC
Welding cart capacity: 2 cylinders
Cylinder diameters supported: Up to 7" (fuel) & 9.5" (oxygen)
Cylinder Carts dimensions (WxDxH):
20"w
x
30"d x 62"h
Cylinder Firewall Cart Features:
OSHA, NFPA (UFC) & CGA compliant
Firewall barrier (1-hour rating)
Tool tray for holding equipment
10" semi-pneumatic wheel with 5/8" ball bearings
Removable handle
Two chains to secure cylinders
Powder coated for durability
Made in the USA
2 Cylinders - Flat Free Tires - Rear Casters - Gas Cylinder Hand Truck
USA Safety Model#: HT953FFFS
Hand truck capacity: 2
Cylinder diameter: Up to 10"
Weight capacity: 600 lbs
Hand truck dimensions (WxDxH):
31.5"w
x
20"d x 47"h
Cylinder Hand Truck Features:
OSHA, NFPA (UFC) & CGA compliant
10.5" flat free urethane filled wheels
Transport acetylene, argon, butane, carbon dioxide (CO2), helium, hydrogen and other gas cylinders
3" fold-away rear casters
3/16" steel supports and round steel tube
Constructed from 11 gauge HR steel
Polypropylene strap and cinch buckle
Fully welded construction
Quality powder-coat paint finish for long service life
Cylinder hand truck is made in the USA
2 Cylinders - Firewall - Heavy Duty - Tool Tray - Green - Welding Cart
USA Safety Model#: HT40216FWSC
Welding cart capacity: 2 cylinders
Cylinder diameters supported: Up to 12.5" (fuel) & 9.5" (oxygen)
Weight capacity: 780 lbs
Cylinder Carts dimensions (WxDxH):
35"w
x
21.5"d x 62"h
Cylinder Dolly Features:
OSHA, NFPA (UFC) & CGA compliant
Firewall barrier
Tool tray for holding equipment
16" pneumatic wheels with steel hubs and no-flat additive complete with 3/4" ball bearings (wheel dimensions 16" x 4")
Continuous handle
Chains to secure cylinders
Powder coated for durability
Made in the USA
36 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Cart
USA Safety Model#: GCMDE36SC
Cylinder capacity: 36
Supported cylinder sizes: D, E (4.5" diameter)
Weight capacity: 2400 lbs
Cart dimensions (WxDxH):
49"w
x
22"d x 38"h
Oxygen Tank Cart Features:
Holds oxygen and other medical gas tanks
4 ultra-quiet 4" casters (2 rear swivel with break and 2 rigid casters)
Handle height is approximately 38"
5" square cylinder opening
Cylinders sit approximately 5.5" off of the ground
All welded steel construction
Welded steel supports
Powder coated green finish
2 Cylinders - Heavy Duty - Rear Casters - Hand Truck
USA Safety Model#: HT973FS
Cart capacity: 2 cylinders
Cylinder diameters supported: Up to 12.25" (fuel) & 10" (oxygen)
Weight capacity: 1,000 lbs
Cart dimensions (WxDxH):
33.5"w
x
26.5"d x 49"h
Hand Truck Features:
OSHA, NFPA (UFC) & CGA compliant
16" diameter four-ply fully pneumatic speed rated wheels
5" diameter rear casters
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder-coat painted for durability
Optional tool tray (Model # HT953TTFS ) available for purchase
Made in the USA using American steel and labor
3 Cylinders - 4 wheels - Flat Free Tires - Green - Gas Cylinder Hand Truck
USA Safety Model#: HT751203RCLGFFSC
Dolly capacity: 3 tanks (9.5" diameter)
Diameters supported: Up to 16"
Weight capacity: 600 lb
Dolly dimensions (WxDxH):
23"w
x
32"d x 48"h
Cylinder Dolly Features:
Hold 1-3 high pressure cylinders (9.5" diameter)
OSHA, NFPA (UFC) & CGA compliant
Constructed from steel with sturdy bracing
10" foam filled tires (wheel dimensions 10" x 4")
Two chains included to secure cylinders
Powder coated for durability
Industrial, medical and commercial use
Made in the USA
2 Cylinders - Firewall - Hoist Hook - Heavy Duty - Green - Welding Cart
USA Safety Model#: HT55216FWSC
Welding cart capacity: 2 cylinders
Cylinder diameters supported: Up to 12.5" (fuel) & 9.5" (oxygen)
Lifting Eye Weight capacity: 1,000 lbs
Cylinder Carts dimensions (WxDxH):
35"w
x
29"d x 62"h
Cylinder Dolly Features:
OSHA, NFPA (UFC) & CGA compliant
Firewall barrier
Locking toolbox for holding equipment (lock not included)
1,000 lb lifting eye
Hose wrap arms on frame
16" pneumatic wheels with steel hubs and no-flat additive complete with 3/4" ball bearings (wheel dimensions 16" x 4")
Continuous handle
Two 1/4" steel perma clamps to secure cylinders
Powder coated for durability
Made in the USA
2 Cylinders or 1 Dewar - 3 Wheels - Gas Cylinder Dolly
USA Safety Model#: HT73012SC
Capacity: 1 cylinder
Cylinder diameters supported:
2 tanks - 9" diameter per tank
1 tank - 20" diameter (180 Liter)
Weight capacity: 1,500 lbs
Cart dimensions (WxDxH):
32"w
x
15"d x 53"h
Cart Features:
Multipurpose dolly
Tilt-back cylinder transport
Two 12" bolt-together, 4-ply pneumatic wheels (12"x4")
One rear 10" swivel caster wheel (10"x2")
Includes 4ft D-Ring ratchet strap
Durable powder-coated, green finish
Industrial, medical and commercial use
Made in the USA
50 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Cart
USA Safety Model#: GCMDE50VSC
Cylinder capacity: 50
Supported cylinder sizes: D, E (4.5" diameter)
Weight capacity: 2400 lbs
Cart dimensions (WxDxH):
27"w
x
57.5"d x 38"h
Oxygen Tank Cart Features:
Holds oxygen and other medical gas tanks
Six ultra-quiet 4" casters (front and rear casters swivel with break)
Handle height is approximately 38"
5" square cylinder opening
Cylinders sit approximately 5.5" off of the ground
All welded steel construction
Welded steel supports
Powder coated green finish
2 Cylinders - Firewall - Hoist Hook - Narrow - Green - Welding Cart
USA Safety Model#: HT60010FWLESC
Welding cart capacity: 2 cylinders
Cylinder diameters supported: Up to 7" (fuel) & 9.5" (oxygen)
Lifting hook weight capacity: 1,000 lbs
Cylinder Carts dimensions (WxDxH):
20"w
x
30"d x 62"h
Cylinder Firewall Cart Features:
OSHA, NFPA (UFC) & CGA compliant
Firewall barrier (1-hour rating)
Lifting Eye
Hose wrap arms on frame
Tool tray for holding equipment
10" semi-pneumatic wheel with 5/8" ball bearings
Removable handle
Two chains to secure cylinders
Powder coated for durability
Made in the USA
4 Cylinders - Heavy Duty - Gas Cylinder Cart
USA Safety Model#: GC430FS
Cart capacity: 1-4 cylinders
Weight capacity: 1,600 lbs.
Cylinder diameter: Up to 12"
Cart dimensions (WxDxH):
40"w
x
24"d x 31"h
Gas Cylinder Cart Features:
OSHA, NFPA (UFC) & CGA compliant
Two 4" locking swivel casters and two rigid casters
3/16" steel supports and round steel tube
Constructed from 11 gauge HR steel
1.5" polypropylene straps and cinch buckles
Clearance from baseplate to ground is just under 3/4"
Baseplate has a beveled edge
Fully welded construction
A chain set (Model # GB105FS ) can be added to this product (optional)
For industrial & commercial use
Quality powder paint finish for long service life
Minor assembly required (casters and handle)
Made in the USA
2 Cylinders - Hoist Hook - Flat Free Tires - Gas Cylinder Hand Truck
USA Safety Model#: HT3552FFFS
Hand truck capacity: 2
Cylinder diameters supported: Up to 12" diameter
Weight capacity: 600 lbs
Hand truck dimensions (WxDxH):
32"w
x
20"d x 71"h
Cylinder Hand Truck Features:
Hook attachment for transport with hoist rigs
Clamping posts to secure cylinders at any angle
10.5" diameter flat free urethane filled wheels
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder-coat painted for durability
Made in the USA using American steel and labor
2 Cylinders - Steel Wheels - Welding Cart
USA Safety Model#: HT987FS
Welding cart capacity: 2 cylinders
Cylinder diameter: Up to 12.375"
Welding cart dimensions (WxDxH):
31"w
x
26"d x 47"h
Cylinder Torch Cart Features:
OSHA, NFPA (UFC) & CGA compliant
For use in industrial and welding environments
20" welded steel wheels
Specially configured to use with fuel/oxygen bottle combinations
3/16" steel supports and round steel tube
Constructed from 11 gauge HR steel
Polypropylene strap and cinch buckle
Cylinder cart has fully welded construction
Quality powder-coat paint finish for long service life
Made in the USA
2 Cylinders - Hoist Hook - Gas Cylinder Hand Truck
USA Safety Model#: HT3552FS
Hand truck capacity: 2
Cylinder diameters supported: Up to 12" diameter
Weight capacity: 600 lbs
Hand truck dimensions (WxDxH):
32"w
x
20"d x 71"h
Cylinder Hand Truck Features:
Hook attachment for transport with hoist rigs
Clamping posts to secure cylinders at any angle
10.5" diameter four-ply fully pneumatic wheels
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder-coat painted for durability
Made in the USA using American steel and labor
6 Cylinders - Heavy Duty - Gas Cylinder Cart
USA Safety Model#: GC630FS
Cart capacity: 1-6 cylinders
Weight capacity: 2,000 lbs.
Cylinder diameter: Up to 12"
Cart dimensions (WxDxH):
52"w
x
24"d x 30"h
Gas Cylinder Cart Features:
OSHA, NFPA (UFC) & CGA compliant
Two 4" locking swivel casters and two 4" rigid casters
3/16" steel supports and round steel tube
Constructed from 11 gauge HR steel
1.5" polypropylene straps and cinch buckles
Clearance from baseplate to ground is just under 3/4"
Baseplate has a beveled edge
Fully welded construction
For industrial & commercial use
Quality powder paint finish for long service life
A chain set (Model # GB105FS ) can be added to this product (optional)
Minor assembly required (casters and handle)
Made in the USA
2 Cylinders - Firewall - Hoist Hook - Large Fuel Cylinder - Green - Welding Cart
USA Safety Model#: HT55216FWPSC
Welding cart capacity: 2 cylinders
Cylinder diameters supported: Up to 15.5" (fuel) & 9.5" (oxygen)
Lifting eye weight capacity: 1,000 lbs
Cylinder Carts dimensions (WxDxH):
39"w
x
28"d x 65.5"h
Cylinder Firewall Cart Features:
OSHA, NFPA (UFC) & CGA compliant
Firewall barrier
Locking toolbox for holding equipment (lock not included)
1,000 lb rated lifting eye for transport by hoist hook
Hose wrap arms on frame
16" pneumatic wheels with steel hubs and no-flat additive complete with 3/4" ball bearings (wheel dimensions 16" x 4")
Continuous handle
Two 1/4" steel perma-clamps to secure cylinders
Powder coated for durability
Made in the USA
2 Cylinders - Hoist Hook - Flat Free Tires - Rear Casters - Gas Cylinder Hand Truck
USA Safety Model#: HT3553FFFS
Hand truck capacity: 2
Cylinder diameters supported: Up to 12" diameter
Lifting hook weight capacity: 600 lbs
Hand truck dimensions (WxDxH):
32"w
x
20"d x 68"h
Cylinder Hand Truck Features:
Hook attachment for transport with hoist rigs
Clamping posts to secure cylinders at any angle
10.5" diameter flat free urethane filled tires
3" diameter rear casters
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder-coat painted for durability
Made in the USA using American steel and labor
2 Cylinders - Hoist Hook - Rear Casters - Gas Cylinder Hand Truck
USA Safety Model#: HT3553FS
Hand truck capacity: 2
Cylinder diameters supported: Up to 12" diameter
Lifting hook weight capacity: 600 lbs
Hand truck dimensions (WxDxH):
32"w
x
20"d x 68"h
Cylinder Hand Truck Features:
Hook attachment for transport with hoist rigs
Clamping posts to secure cylinders at any angle
10.5" diameter four-ply fully pneumatic wheels
3" diameter rear casters
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder-coat painted for durability
Made in the USA using American steel and labor
2 Cylinders - Hoist Hook - Flat Free Tires - Rear Casters - Tool Tray - Gas Cylinder Hand Truck
USA Safety Model#: HT3549FFFS
Hand truck capacity: 2
Cylinder diameters supported: Up to 12" diameter
Lifting hook weight capacity: 600 lbs
Hand truck dimensions (WxDxH):
32"w
x
20"d x 68"h
Cylinder hand truck Features:
Hook attachment for transport with hoist rigs
Clamping posts to secure cylinders at any angle
10.5" diameter flat free urethane filled tires
Includes tray to hold torch/tools
3" diameter rear casters
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety 54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder-coat painted for durability
Made in the USA using American steel and labor
2 Cylinders - Firewall - Flat Free Tires - Welding Cart
USA Safety Model#: HT3952FFFS
Welding cart capacity: 2 cylinders
Cylinder diameters supported: Up to 12.5" (fuel) & 10" (oxygen)
Weight capacity: 600 lbs
Welding cart dimensions (WxDxH):
32"w
x
24"d x 60"h
Cylinder Torch Cart Features:
10.5" diameter flat free urethane filled wheels
1" thick Marinite I™ lab certified fire barrier material encased in steel plate shell
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Cylinder firewall cart is powder-coat painted for durability
Made in the USA using American steel and labor
2 Cylinders - Hoist Hook - Rear Casters - Tool Tray - Gas Cylinder Hand Truck
USA Safety Model#: HT3549FS
Hand truck capacity: 2
Cylinder diameters supported: Up to 12" diameter
Lifting hook weight capacity: 600 lbs
Hand truck dimensions (WxDxH):
32"w
x
20"d x 68"h
Cylinder hand truck Features:
Hook attachment for transport with hoist rigs
Clamping posts to secure cylinders at any angle
10.5" diameter four-ply fully pneumatic wheels
Includes tray to hold torch/tools
3" diameter rear casters
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder-coat painted for durability
Made in the USA using American steel and labor
4 Propane (33-43lb) or 6 High Pressure Gas Tanks - Forkliftable - Low Profile Floor - Gas Cylinder Cart
USA Safety Model#: GC4FL6HPAM
Cart capacity: Supports either -
-4 propane cylinders (26.5" tall forklift tanks), or
-6 high pressure cylinders
Cylinder diameters: 9" - 12.5"
Cart dimensions (WxDxH):
36"w
x
39"d x 44"h
Gas Cylinder Cart Features:
OSHA, NFPA (UFC) & CGA compliant
Two 4" swivel casters and two rigid casters
Forklift pockets
Constructed from steel
5,000 lb ratchet strap to secure cylinders
Low profile platform for easy tilt-n-roll loading and unloading
For industrial & commercial use
Quality electrostatic powder paint finish for long service life
Minor assembly required (casters and support bar)
Made in the USA
2 Cylinders - Firewall - Welding Cart
USA Safety Model#: HT3952FS
Welding cart capacity: 2 cylinders
Cylinder diameters supported: Up to 12.5" (fuel) & 10" (oxygen)
Weight capacity: 700 lbs
Welding cart dimensions (WxDxH):
32"w
x
24"d x 60"h
Cylinder Torch Cart Features:
10.5" diameter four-ply fully pneumatic wheels
1" thick Marinite I™ lab certified fire barrier material encased in steel plate shell
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Cylinder firewall cart is powder-coat painted for durability
Made in the USA using American steel and labor
2 Cylinders - Hoist Hook - Heavy Duty - Gas Cylinder Dolly
USA Safety Model#: HT3591FS
Dolly capacity: 2 cylinders
Cylinder diameters supported: Up to 12" diameter
Lifting hook weight capacity: 600 lbs
Dolly dimensions (WxDxH):
35"w
x
24"d x 68"h
Cylinder Dolly Features:
Hook attachment for transport with hoist rigs
Clamping posts to secure cylinders at any angle
16" diameter four-ply fully pneumatic speed rated wheels
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder-coat painted for durability
Made in the USA using American steel and labor
6 Cylinders - Hoist Hook & Lifting Eyes - Forkliftable - Casters - Cylinder Cradle Cart
USA Safety Model#: CCC64CSC
Cylinder capacity: 6
Supported cylinder sizes: 9.5" diameter (200-300 cu ft)
Weight capacity: 1,950 lbs
Cart dimensions (WxDxH):
32"w
x
22"d x 79"h
Tank Cradle Cart Features:
Holds up to 6 cylinders of up to 9.5" in diameter
Security bars bolt to frame to secure cylinders
4 steel caster wheels (6")
4 lifting eyes and center hoist hook
Top forklift pockets
Lower two-way forklift pockets
3/16" steel floor plate
Finished with 5 stage powder coat, black
Industrial and commercial use
Outdoor or indoor use
Made in the USA
2 Cylinders - Firewall - Heavy Duty - Welding Cart
USA Safety Model#: HT3901FS
Welding cart capacity: 2 cylinders
Cylinder diameters supported: Up to 12.5" (fuel) & 10" (oxygen)
Weight capacity: 1,000 lbs
Welding cart dimensions (WxDxH):
35"w
x
24"d x 60"h
Torch Cart Features:
16" diameter four-ply fully pneumatic speed rated wheels
1" thick Marinite I™ lab certified fire barrier material encased in steel plate shell
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
Gas torch cart built of 14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder-paint painted for durability
Made in the USA using American steel and labor
6 Cylinders - Hoist Hook & Lifting Eyes - Forkliftable - In-Line Casters - Cylinder Cradle Cart
USA Safety Model#: CCC66CHSC
Cylinder capacity: 6
Supported cylinder sizes: 9.5" diameter (200-300 cu ft)
Weight capacity: 1,950 lbs
Cart dimensions (WxDxH):
32"w
x
22"d x 79"h
Tank Cradle Cart Features:
Holds up to 6 cylinders up to 9.5" in diameter
Security bars bolt to frame to secure cylinders
6 frame-inset caster wheels
4 lifting eyes and center hoist hook
Top forklift pockets
Lower two-way forklift pockets
3/16" steel floor plate
Finished with 5 stage powder coat, black
Industrial and commercial use
Outdoor or indoor use
Made in the USA
6 Propane (33-43lb) or 8 High Pressure Gas Tanks - Forkliftable - Low Profile Floor - Gas Cylinder Cart
USA Safety Model#: GC6FL8HPAM
Cart capacity: Supports either -
-6 propane cylinders (26.5" tall forklift tanks), or
-8 high pressure cylinders
Cylinder diameters: 9" - 12.5"
Cart dimensions (WxDxH):
45"w
x
39"d x 44"h
Gas Cylinder Cart Features:
OSHA and NFPA compliant
Two 4" swivel casters and two rigid casters
Forklift pockets
Constructed from steel
5,000 lb ratchet strap to secure cylinders
Low profile platform for easy tilt-n-roll loading and unloading
For industrial & commercial use
Quality electrostatic powder paint finish for long service life
Minor assembly required (casters and support bar)
Made in the USA
6 Cylinders - Hoist Hook & Lifting Eyes - Forkliftable - Low Profile - Cylinder Cradle Cart
USA Safety Model#: CCC66CLPSC
Cylinder capacity: 6
Supported cylinder sizes: 9.5" diameter (200-300 cu ft)
Weight capacity: 1,950 lbs
Cart dimensions (WxDxH):
34"w
x
32"d x 78"h
Tank Cradle Cart Features:
Holds up to 6 cylinders of up to 9.5" in diameter
Security bars bolt to frame to secure cylinders
Low-profile platform design
Fiberglass and nylon fixed caster wheels
4 lifting eyes and center hoist hook
Lower two-way forklift pockets
3/16" steel floor plate
Finished with 5 stage powder coat, black
Industrial and commercial use
Outdoor or indoor use
Made in the USA
6 Cylinders - Green - Gas Cylinder Cart
USA Safety Model#: GCCT6SC
Capacity: 6 cylinder
Cylinder diameters supported: 9"
Weight capacity: 1,400 lbs
Cart dimensions (WxDxH):
47"w
x
25"d x 34"h
Cart Features:
Low profile design for easier tank loading and unloading (2" height)
Vertical cylinder transport
Four 6" caster wheels, 2 are locking
Chains to secure cylinder to cart
Durable powder green coated finish
Industrial, medical and commercial use
Made in the USA
2 Cylinders - Hoist Hook - Steel Wheels - Gas Cylinder Dolly
USA Safety Model#: HT3587FS
Dolly capacity: 2
Cylinder diameters supported: Up to 12" diameter
Lifting hook weight capacity: 600 lbs
Dolly dimensions (WxDxH):
31"w
x
26"d x 68"h
Cylinder Dolly Features:
Hook attachment for transport with hoist rigs
Clamping posts to secure cylinders at any angle
20" diameter steel main all-surface wheels
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder-coat painted for durability
Made in the USA using American steel and labor
2 Cylinders - Firewall - Rear Casters - Welding Cart
USA Safety Model#: HT3973FS
Welding cart capacity: 2 cylinders
Cylinder diameters supported: Up to 12.5" (fuel) & 10" (oxygen)
Weight capacity: 1,000 lbs
Welding cart dimensions (WxDxH):
35"w
x
24"d x 61"h
Firewall Torch Cart Features:
16" diameter four-ply fully pneumatic speed rated wheels
1" thick Marinite I™ lab certified fire barrier material encased in steel plate shell
5" diameter rear casters
Welding cart is UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder-coat painted for durability
Made in the USA using American steel and labor
2 Cylinders - Firewall - Steel Wheels - Welding Cart
USA Safety Model#: HT3987FS
Welding cart capacity: 2 cylinders
Cylinder diameters supported: Up to 12.5" (fuel) & 10" (oxygen)
Weight capacity: 700 lbs
Welding cart dimensions (WxDxH):
32"w
x
26"d x 60"h
Cylinder Torch Cart Features:
20" diameter steel main all-surface wheels
1" thick Marinite I™ lab certified fire barrier material encased in steel plate shell
UFC, NFPA, CGA, & OSHA compliant
Firewall cart includes dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder-coat painted for durability
Made in the USA using American steel and labor
12 Cylinders - Hoist Hook & Lifting Eyes - Forkliftable - In-Line Casters - Cylinder Cradle Cart
USA Safety Model#: CCC126CHSC
Cylinder capacity: 12
Supported cylinder sizes: 9.5" diameter (200-300 cu ft)
Weight capacity: 2,950 lbs
Cart dimensions (WxDxH):
42"w
x
32"d x 79"h
Tank Cradle Cart Features:
Holds up to 12 cylinders up to 9.5" in diameter
Security bars bolt to frame to secure cylinders
6 frame-inset caster wheels
4 lifting eyes and center hoist hook
Top four-way forklift pockets
Lower two-way forklift pockets
3/16" steel floor plate
Finished with 5 stage powder coat, black
Industrial and commercial use
Outdoor or indoor use
Made in the USA
8 Cylinders - Green - Gas Cylinder Cart
USA Safety Model#: GCCT8SC
Capacity: 8 cylinder
Cylinder diameters supported: 9"
Weight capacity: 1,400 lbs
Cart dimensions (WxDxH):
57"w
x
25"d x 34"h
Cart Features:
Low profile design for easier tank loading and unloading (2" height)
Vertical cylinder transport
Four 6" caster wheels, 2 are locking
Chains to secure cylinder to cart
Durable green powder coated finish
Industrial, medical and commercial use
Made in the USA
2 Cylinders - Firewall - Hoist Hook - Heavy Duty - Welding Cart
USA Safety Model#: HT3991FS
Welding cart capacity: 2 cylinders
Cylinder diameters supported: Up to 12.5" (fuel) & 10" (oxygen)
Weight capacity: 1,000 lbs
Welding cart dimensions (WxDxH):
35"w
x
24"d x 64"h
Firewall Welding Cart Features:
Hook attachment for transport with hoist rigs
Clamping posts to secure cylinders at any angle
16" diameter four-ply fully pneumatic speed rated wheels
1" thick Marinite I™ lab certified fire barrier material encased in steel plate shell
Includes tray to hold torch/tools
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
Welding cart with firewall has 14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder-coat painted for durability
Made in the USA using American steel and labor
2 Cylinders - Firewall - Hoist Hook - Steel Wheels - Welding Cart
USA Safety Model#: HT3989FS
Welding cart capacity: 2 cylinders
Cylinder diameters supported: Up to 12.5" (fuel) & 10" (oxygen)
Weight capacity: 700 lbs
Welding cart dimensions (WxDxH):
32"w
x
26"d x 64"h
Cylinder Torch Cart Features:
Hook attachment for transport with hoist rigs
Welding cart with firewall has clamping posts to secure cylinders at any angle
20" diameter steel main all-surface wheels
1" thick Marinite I™ lab certified fire barrier material encased in steel plate shell
Includes tray to hold torch/tools
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder-coat painted for durability
Made in the USA using American steel and labor
2 Cylinders - Firewall - Hoist Hook - Rear Casters - Heavy Duty - Welding Cart
USA Safety Model#: HT3993FS
Welding cart capacity: 2 cylinders
Cylinder diameters supported: Up to 12.5" (fuel) & 10" (oxygen)
Weight capacity: 1,000 lbs
Welding cart dimensions (WxDxH):
35"w
x
24"d x 64"h
Firewall Welding Cart Features:
Hook attachment for transport with hoist rigs
Clamping posts to secure cylinders at any angle
16" diameter four-ply fully pneumatic speed rated wheels
1" thick Marinite I™ lab certified fire barrier material encased in steel plate shell
5" diameter rear casters
Includes locking lid tool tray to hold torch/tools
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
Welding cart with firewall has 14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder-coat painted for durability
Made in the USA using American steel and labor
6 Cylinder - Propane Tank Mover & Lifter for Forklifts
USA Safety Model#: TTLP6VT
Cart capacity: 6 propane tanks
Weight capacity: 450 lbs
Diameter supported: 12-1/2" (33# propane tank)
Cart dimensions (WxDxH):
33-1/4"w
x
72"d x 78"h
Tank Mover & Lifter Features:
Holds 6 propane tanks (33# size), 2 vertical & 4 horizontal
Steel construction
Built-in crane for loading and unloading propane cylinder on the fork lift
Crane has 360 degree rotation
Manual hand pump hydraulic lift mechanism
Two rigid and two swivel casters
Floor lock to immobilize the cart
Made in the USA