Skip to Content
The store will not work correctly when cookies are disabled.
3 Cylinders Wide - Cylinder Racks and Stands
-
6 Cylinders - Oxygen & Medical Gases (D,E,M9) - Cylinder Rack
USA Safety Model#: GR260RR
Cylinder capacity: 6
Supported cylinder sizes: D, E, M9 (4.5" diameter)
Oxygen Tank Rack dimensions (WxDxH):
15"w
x
12"d x 10"h
Medical Oxygen Tank Rack Features:
- Holds oxygen and other medical gas tanks
- 5" square cylinder opening
- Cylinders are kept off of ground approximately 1/4 inch
- All welded steel construction
- ASTM A513 steel supports
- Powder coated black finish
- Ships parcel
-
6 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Rack
USA Safety Model#: GRMDE6SSC
Cylinder capacity: 6
Supported cylinder sizes: D, E (4.5" diameter)
Rack dimensions (WxDxH):
19"w
x
13"d x 22"h
Oxygen Tank Rack Features:
- Holds oxygen and other medical gas tanks
- 5" square cylinder opening
- Cylinders are kept off of ground 0.25"
- All-welded steel construction
- Pre-drilled 1/2" holes in flat iron base
- Powder coated green finish
- Ships parcel
- Made in the USA
-
6 Cylinders - Oxygen & Medical Gases (D,E) - Red - Cylinder Rack
USA Safety Model#: GRMDE6SRSC
Cylinder capacity: 6
Supported cylinder sizes: D, E (4.5" diameter)
Rack dimensions (WxDxH):
18.5"w
x
12"d x 21"h
Oxygen Tank Rack Features:
- Holds oxygen and other medical gas tanks
- 5" square cylinder opening
- Cylinders are kept off of ground 0.25"
- All-welded steel construction
- Pre-drilled 1/2" holes in flat iron base
- Powder coated Red finish
- Ships parcel
- Made in the USA
-
3 Cylinders - Gas Cylinder Stand
USA Safety Model#: GR375FS
Stand capacity: 1-3 cylinders
Cylinder diameters: Up to 12"
Stand dimensions (WxDxH):
40"w
x
10.5"d x 30"h
Gas Cylinder Stand Features:
- OSHA, NFPA (UFC) & CGA compliant
- Industrial and commercial use cylinder stand
- 1.5" Polypropylene strap and cinch buckle
- Store acetylene, argon, butane, carbon dioxide (CO2), helium, hydrogen and nitrogen cylinders
- Cylinder stand made of fully welded construction
- Quality powder paint finish for long service life
- Steel reinforced vinyl edge guards protect equipment
- Constructed from 11 gauge and heavier plate steel
- A chain set (Model # GB105FS) can be added to this product (optional)
- Process control version also available
- Mounts to the floor or the wall
- Made in the USA
- Cylinder stand ships parcel oversized rate or freight
-
12 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Rack
USA Safety Model#: GRMDE12SSC
Cylinder capacity: 12
Supported cylinder sizes: D, E (4.5" diameter)
Rack dimensions (WxDxH):
23.5"w
x
17"d x 21"h
Oxygen Tank Rack Features:
- Holds oxygen and other medical gas tanks
- 5" square cylinder opening
- Cylinders are kept off of ground 0.25"
- All-welded steel construction
- Pre-drilled 1/2" holes in flat iron base
- Powder coated green finish
- Made in the USA
-
6 Cylinders - Poly - Gas Cylinder Stand
USA Safety Model#: GR7202YEEP
Stand capacity: 1-6 cylinders
Diameters supported: 3-10"
Load Capacity: 1,200 lbs
Stand dimensions (WxDxH):
31"w
x
47.5"d x 41"h
Gas Cylinder Stand Features:
- OSHA 29 CFR.1910 compliant
- Made with polyethylene
- Will not rust, corrode, or spark
- 6 nylon straps with ladder slide style clip included
- Forkliftable (only when not loaded)
- Add Lower Straps (optional) - Model # AC7205BKEP
- Add Ramp (optional) - Model # AC7203BKEP
- Add Wheeled Caster Frame (optional) - Model # AC7204BKEP
- Industrial and commercial use
- Made in the USA
-
3 Cylinders - Process Station - Gas Cylinder Rack
USA Safety Model#: PR377FS
Rack capacity: 1-3 cylinders
Cylinder diameters: Up to 12"
Cylinder rack dimensions (WxDxH):
40"w
x
12"d x 72"h
Cylinder Rack Features:
- OSHA, NFPA (UFC) & CGA compliant
- 1.5" Polypropylene strap and cinch buckle
- Cylinder rack has fully welded construction
- Quality epoxy powder paint finish for long service life
- Steel reinforced vinyl edge guards protect equipment
- Constructed from 11 gauge and heavier plate steel
- Elevated panel (38.75" by 14") allows for mounting of cylinder controls, cross-over devices, etc.
- A chain set (Model # GB105FS) can be added to this product (optional)
- Unit ships partially disassembled for freight savings & ease of use
- Cylinder stand ships LTL freight
- Industrial and commercial use
- Made in the USA
-
12 Propane Tanks (33 LB) - Horizontal Storage - Steel - Gas Cylinder Rack
USA Safety Model#: GR12302MAAM
Cabinet capacity: 12 cylinders (33 lb) of 12.5" diameter
Cabinet dimensions (WxDxH):
44"w
x
27"d x 50"h
Gas Cylinder Rack Features:
- Frame and shelf made from galvannealed steel
- Pre-drilled holes (13/16") for anchoring each foot pad
- Powder coated with outdoor grade paint for extra durability
- Ships assembled ready for use
- Product bolts together and can be disassembled
- Made in the USA
-
6 Cylinders - Gas Cylinder Stand
USA Safety Model#: GR600FS
Stand capacity: 1-6 cylinders
Diameters supported: Up to 12"
Stand dimensions (WxDxH):
44"w
x
23"d x 30"h
Gas Cylinder Stand Features:
- OSHA, NFPA (UFC) & CGA compliant
- 1.5" Polypropylene strap and cinch buckle
- Fully welded construction
- Quality powder-coat paint finish for long service life
- Steel reinforced vinyl edge guards protect equipment
- Constructed from 11 gauge and heavier plate steel
- Designed to mount to floor with four fasteners
- A chain set (Model # GB105FS) can be added to this product (optional)
- Process control version also available
- Industrial and commercial use
- Made in the USA
-
6 Cylinders - Basic - Gas Cylinder Rack
USA Safety Model#: GRCR6SC
Cylinder capacity: 6
Cylinder diameters supported: Up to 9.5"
Cylinder rack dimensions (WxDxH):
33"w
x
21.5"d x 36"h
Cylinder Storage Rack Features:
- Fully welded 1.5" steel tube
- Holds up to 6 cylinders up to 9.5" in diameter
- One zinc plated 3/16" steel chain included
- Pre-drilled 05" floor mounting holes on flat iron base
- Finished with black powder paint
- Industrial and commercial use
- Made in the USA
-
6 Cylinders - Back-to-Back Process Station - Gas Cylinder Stand
USA Safety Model#: PR600PFS
Stand capacity: 1-6 cylinders
Diameters supported: Up to 12"
Stand dimensions (WxDxH):
52"w
x
24"d x 72"h
Gas Cylinder Stand Features:
- OSHA, NFPA (UFC) & CGA compliant
- 1.5" Polypropylene strap and cinch buckle
- Fully welded construction
- Quality powder paint finish for long service life
- Steel reinforced vinyl edge guards protect equipment
- Constructed from 11 gauge and heavier plate steel
- Designed to mount to floor with four fasteners
- A chain set (Model # GB105FS) can be added to this product (optional)
- Industrial and commercial use
- Made in the USA
-
6 Tanks - Vertical Storage - Forkliftable - Propane Tank Rack
USA Safety Model#: TSLP170VT
Storage Rack Capacity: 6 propane tanks
Weight capacity: 450 lbs
Diameter supported: 12-1/2" (33# propane tank)
Cart dimensions (WxDxH):
38-1/4"w
x
39-1/8"d x 29"h
Propane Tank Rack Features:
- Holds up to 6 LP tanks (up to 12.5” diameter)
- Safety chains included for each side of rack
- All steel construction
- Coated with water based paint
- Made in the USA
-
3 Cylinders (3x1) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR3X1FS
Cylinder capacity: 1-3
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
44"w
x
16"d x 30"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds three cylinders, three wide by two deep
- Two levels of welded steel chains (19" long each)
- Snaps for each cylinder
- 4 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
6 Cylinders - Hoist Hook - Lifting Eyes - Forkliftable - Cylinder Cradle Rack
USA Safety Model#: CCC6FLSC
Cylinder capacity: 6
Cylinder diameters supported: Up to 9.5"
Weight Capacity: 1,950 lbs
Cylinder rack dimensions (WxDxH):
33"w
x
23"d x 77"h
Cylinder Storage Rack Features:
- Holds up to 6 cylinders up to 9.5" in diameter
- Security bars bolt to frame to secure cylinders
- 4 lifting eyes and center hoist hook
- Top-mounted two-way forklift pockets
- Open base for pallet jack or forklift movement
- 3/16" steel floor plate (28"wx22"d)
- Finished with 5 stage powder coat, black
- Industrial and commercial use
- Outdoor or indoor use
- Made in the USA
-
6 Cylinders (3x2) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR3X2FS
Cylinder capacity: 1-6
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
44"w
x
26"d x 30"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds six cylinders, three wide by two deep
- Two levels of welded steel chains (19" long each)
- Snaps for each cylinder
- 8 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
3 Cylinders (3x1) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR3X1PSFS
Cylinder capacity: 1-3
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
44"w
x
16"d x 72"h
Product Features:
- Cylinder rack meets USGS high seismic hazard zone requirements when installed properly
- Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square steel tube continuously seam welded
- Holds three cylinders, three wide by one deep
- Two levels of welded steel chains (19" long each)
- 4 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Gas cylinder rack includes snaps for each cylinder
- Sealed with exterior grade powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
9 Cylinders (3x3) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR3X3FS
Cylinder capacity: 1-9
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
44"w
x
38"d x 30"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds nine cylinders, three wide by three deep
- Two levels of welded steel chains (19" long each)
- Snaps for each cylinder
- 8 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
6 Cylinders (3x2) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR3X2PSFS
Cylinder capacity: 1-6
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
44"w
x
25"d x 72"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds six cylinders, three wide by two deep
- Two levels of welded steel chains (19" long each)
- 8 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Gas cylinder rack includes snaps for each cylinder
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
9 Cylinders (3x3) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR3X3PSFS
Cylinder capacity: 1-9
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
44"w
x
38"d x 72"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds nine cylinders, three wide by three deep
- Two levels of welded steel chains (19" long each)
- 8 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Gas cylinder rack includes snaps for each cylinder
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
12 Cylinders (3x4) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR3X4FS
Cylinder capacity: 1-12
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
44"w
x
50"d x 30"h
Gas Cylinder Storage Rack Features:
- 2" square steel tube continuously seam welded, 0.125" thick
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Holds twelve cylinders, three wide by four deep
- Two levels of welded steel chains (19" long each)
- Snaps for each cylinder
- 8 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
12 Cylinders - 16" Hinged Ramp - Gas Bottle Pallet Rack
USA Safety Model#: GP2112FS
Pallet capacity: 12
Cylinder diameters: 6"-11"
Pallet dimensions (WxDxH):
48"w
x
48"d x 33"h
Gas Tank Pallet Features:
- OSHA, NFPA (UFC) & CGA compliant
- Fits 12 cylinders (300 CFT capacity) up to 11" diameter or smaller
- 16" hinged ramp welded onto pallet (48"Wx16"D)
- Two-way, fully enclosed forklift channels (3"H X 8"W)
- Rack is built from 2" square steel tube continuously seam welded
- Two levels of welded steel chains
- Snaps for each cylinder
- Pallet welded from 11 gauge steel
- Quality powder-coat paint finish for long service life & non-skid surface
- Made in the USA
Shop By
Shopping Options
Outdoor/Weather Resistant
