Skip to Content
The store will not work correctly when cookies are disabled.
Stainless Steel Products - Other Safety Equipment
-
1 Cylinder - Wall Mount - Stainless Steel - Gas Cylinder Bracket
USA Safety Model#: GB100SSFS
Cylinder capacity: 1
Diameters supported: 4"-12"
Product dimensions (WxDxH):
8"w
x
2.25"d x 4.25"h
Product Features:
- OSHA, NFPA (UFC) & CGA compliant
- Constructed from 12 gauge Type 304 stainless steel
- 1.5" polypropylene strap (54" long) and nylon cinch buckle
- Edges protected with steel reinforced vinyl edge guarding
- A chain set (Model # GB105FS) can be added to this product (optional)
- Ships parcel or freight for large quantities
- Made in the USA
-
1 Cylinder - Bench Mount - Stainless Steel - Gas Cylinder Bracket
USA Safety Model#: GB150SSFS
Cylinder capacity: 1
Diameters supported: 4"-14"
Product dimensions (WxDxH):
8"w
x
4.25"d x 4.25"h
Product Features:
- OSHA, NFPA (UFC) & CGA compliant
- Clamps to bench or table tops from 1" to 2.75" thick
- Useful where walls inaccessible or when temporary supports required
- Dual mounting posts with swivel feet & non-slip pads to clamp
- Constructed from 12 gauge Type 304 steel
- Requires 1 1/2" of bench top to secure bracket
- Standard strap with nylon buckle included
- A chain set (Model # GB105FS) can be added to this product (optional)
- Ships parcel, larger quantities ship by freight
- Made in the USA
-
2 Cylinders - Wall Mount - Stainless Steel - Gas Cylinder Bracket
USA Safety Model#: GB200SSFS
Cylinder capacity: 1-2
Diameters supported: 4"-12"
Product dimensions (WxDxH):
24"w
x
2.25"d x 4.25"h
Product Features:
- OSHA, NFPA (UFC) & CGA compliant
- Constructed from 12 gauge Type 304 stainless steel
- 1.5" polypropylene strap (54" long) and nylon cinch buckle
- Edges protected with steel reinforced vinyl edge guarding
- A chain set (Model # GB105FS) can be added to this product (optional)
- Ships UPS
- Made in the USA
-
2 Cylinder - Bench Mount - Stainless Steel - Gas Cylinder Bracket
USA Safety Model#: GB250SSFS
Cylinder capacity: 2
Diameters supported: 4"-12"
Product dimensions (WxDxH):
24"w
x
4.25"d x 4.25"h
Product Features:
- OSHA, NFPA (UFC) & CGA compliant
- Clamps to bench or table tops from1" to 2.75" thick
- Useful where walls are inaccessible or when temporary supports required
- Dual mounting posts with swivel feet & non-slip pads to clamp
- Constructed from 12 gauge Type 304 steel
- Requires 1 1/2" of bench top to secure bracket
- Standard strap set
- A chain set (Model # GB105FS) can be added to this product (optional)
- Ships parcel or larger quantities by freight
- Made in the USA
-
2 Cylinders - Stainless Steel - Gas Cylinder Stand
USA Safety Model#: GR275SSFS
Stand capacity: 1-2 cylinders
Cylinder diameters: Up to 12"
Stand dimensions (WxDxH):
28"w
x
12"d x 30"h
Cylinder Stand Features:
- OSHA, NFPA (UFC) & CGA compliant
- Polypropylene strap and nylon buckle
- Gas cylinder stand fully welded
- Constructed from Type 304 stainless steel
- Steel reinforced vinyl edge guards protect equipment
- A chain set (Model # GB105FS) can be added to this product (optional)
- Industrial and commercial use
- Mounts to the floor
- Made in the USA
- Cylinder stand ships UPS oversized rate or truck
-
1 Cylinder (1x1) - Stainless Steel - Barricade - Gas Cylinder Rack
USA Safety Model#: BR1X1SSFS
Cylinder capacity: 1
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
16"w
x
16"d x 30"h
Cylinder Storage Rack Features:
- Will not rust or corrode
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square Type 304 Stainless steel tube continuously seam welded
- Two levels of welded Type 316 Stainless steel chains
- Snaps for each cylinder
- 3 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
2 Cylinders (1x2) - Stainless Steel - Barricade - Gas Cylinder Rack
USA Safety Model#: BR1X2SSFS
Cylinder capacity: 1-2
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
16"w
x
26"d x 30"h
Gas Tank Storage Rack Features:
- Will not rust or corrode
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square Type 304 Stainless steel tube continuously seam welded
- Holds two cylinders, one wide by two deep
- Two levels of welded Type 316 Stainless steel chains
- Snaps for each cylinder
- 4 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
3 Cylinders (1x3) - Stainless Steel - Barricade - Gas Cylinder Rack
USA Safety Model#: BR1X3SSFS
Cylinder capacity: 1-3
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
16"w
x
38"d x 30"h
Gas Cylinder Storage Rack Features:
- Will not rust or corrode
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square Type 304 Stainless steel tube continuously seam welded
- Holds three cylinders, one wide by three deep
- Two levels of welded Type 316 Stainless steel chains
- Snaps for each cylinder
- 4 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
2 Cylinders (2x1) - Stainless Steel - Barricade - Gas Cylinder Rack
USA Safety Model#: BR2X1SSFS
Cylinder capacity: 1-2
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
30"w
x
16"d x 30"h
Product Features:
- Will not rust or corrode
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Holds two cylinders, two wide by one deep
- Two levels of welded Type 316 Stainless steel chains
- Snaps for each cylinder
- 3 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
4 Cylinders (1x4) - Stainless Steel - Barricade - Gas Cylinder Rack
USA Safety Model#: BR1X4SSFS
Cylinder capacity: 1-4
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
16"w
x
50"d x 30"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square Type 304 Stainless steel tube continuously seam welded
- Holds four cylinders, one wide by four deep
- Two levels of welded Type 316 Stainless steel chains
- Snaps for each cylinder
- 4 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
4 Cylinders (2x2) - Stainless Steel - Barricade - Gas Cylinder Rack
USA Safety Model#: BR2X2SSFS
Cylinder capacity: 1-4
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
30"w
x
26"d x 30"h
Product Features:
- Will not rust or corrode
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square Type 304 Stainless steel tube continuously seam welded
- Holds four cylinders, two wide by two deep
- Two levels of welded Type 316 Stainless steel chains
- Gas cylinder rack includes snaps for each cylinder
- 6 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
3 Cylinders (3x1) - Stainless Steel - Barricade - Gas Cylinder Rack
USA Safety Model#: BR3X1SSFS
Cylinder capacity: 1-3
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
44"w
x
16"d x 30"h
Product Features:
- Will not rust or corrode
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square Type 304 Stainless steel tube continuously seam welded
- Holds three cylinders, three wide by two deep
- Two levels of welded Type 316 Stainless steel chains
- Snaps for each cylinder
- 4 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
6 Cylinders (2x3) - Stainless Steel - Barricade - Gas Cylinder Rack
USA Safety Model#: BR2X3SSFS
Cylinder capacity: 1-6
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
30"w
x
38"d x 30"h
Product Features:
- 2" square Type 304 Stainless steel tube continuously seam welded
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Holds six cylinders, two wide by three deep
- Two levels of welded Type 316 Stainless steel chains
- Snaps for each cylinder
- 6 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Indoor or outdoor bulk gas cylinder storage
- Made in the USA
-
6 Cylinders (3x2) - Stainless Steel - Barricade - Gas Cylinder Rack
USA Safety Model#: BR3X2SSFS
Cylinder capacity: 1-6
Cylinder diameters supported: Up to 12"
Product dimensions (WxDxH):
44"w
x
26"d x 30"h
Product Features:
- 2" square Type 304 Stainless steel tube continuously seam welded
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Holds six cylinders, three wide by two deep
- Two levels of welded Type 316 Stainless steel chains
- Snaps for each cylinder
- 8 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
4 Cylinders (4x1) - Stainless Steel - Barricade - Gas Cylinder Rack
USA Safety Model#: BR4X1SSFS
Cylinder capacity: 1-4
Cylinder diameters supported: Up to 12"
Product dimensions (WxDxH):
58"w
x
16"d x 30"h
Product Features:
- 2" square Type 304 Stainless steel tube continuously seam welded
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Holds four cylinders, four wide by one deep
- Two levels of welded Type 316 Stainless steel chains
- Snaps for each cylinder
- Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
8 Cylinders (2x4) - Stainless Steel - Barricade - Gas Cylinder Rack
USA Safety Model#: BR2X4SSFS
Cylinder capacity: 1-8
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
30"w
x
50"d x 30"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square Type 304 Stainless steel tube continuously seam welded
- Holds eight cylinders, two wide by four deep
- Two levels of welded Type 316 Stainless steel chains
- Snaps for each cylinder
- 6 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
9 Cylinders (3x3) - Stainless Steel - Barricade - Gas Cylinder Rack
USA Safety Model#: BR3X3SSFS
Cylinder capacity: 1-9
Cylinder diameters supported: Up to 12"
Product dimensions (WxDxH):
44"w
x
38"d x 30"h
Product Features:
- 2" square Type 304 Stainless steel tube continuously seam welded
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Holds nine cylinders, three wide by three deep
- Two levels of welded Type 316 Stainless steel chains
- Snaps for each cylinder
- 8 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Sealed with exterior grade powder-coat paint
- Made in the USA
-
5 Cylinders (5x1) - Stainless Steel - Barricade - Gas Cylinder Rack
USA Safety Model#: BR5X1SSFS
Cylinder capacity: 1-5
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
72"w
x
16"d x 30"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square Type 304 Stainless steel tube continuously seam welded
- Holds five cylinders, five wide by one deep
- Two levels of welded Type 316 Stainless steel chains
- Snaps for each cylinder
- 6 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
8 Cylinders (4x2) - Stainless Steel - Barricade - Gas Cylinder Rack
USA Safety Model#: BR4X2SSFS
Cylinder capacity: 1-8
Cylinder diameters supported: Up to 12"
Product dimensions (WxDxH):
58"w
x
26"d x 30"h
Product Features:
- 2" square Type 304 Stainless steel tube continuously seam welded
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Holds eight cylinders, four wide by two deep
- Two levels of welded Type 316 Stainless steel chains
- Snaps for each cylinder
- 10 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
12 Cylinders (3x4) - Stainless Steel - Barricade - Gas Cylinder Rack
USA Safety Model#: BR3X4SSFS
Cylinder capacity: 1-12
Cylinder diameters supported: Up to 12"
Product dimensions (WxDxH):
44"w
x
50"d x 30"h
Product Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square Type 304 Stainless steel tube continuously seam welded
- Holds twelve cylinders, three wide by four deep
- Two levels of welded Type 316 Stainless steel chains
- Snaps for each cylinder
- 8 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
12 Cylinders (4x3) - Stainless Steel - Barricade - Gas Cylinder Rack
USA Safety Model#: BR4X3SSFS
Cylinder capacity: 1-12
Cylinder diameters supported: Up to 12"
Product dimensions (WxDxH):
58"w
x
38"d x 30"h
Product Features:
- 2" square Type 304 Stainless steel tube continuously seam welded
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Holds twelve cylinders, four wide by three deep
- Two levels of welded Type 316 Stainless steel chains
- Snaps for each cylinder
- 10 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
10 Cylinders (5x2) - Stainless Steel - Barricade - Gas Cylinder Rack
USA Safety Model#: BR5X2SSFS
Cylinder capacity: 1-10
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
72"w
x
26"d x 30"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square Type 304 Stainless steel tube continuously seam welded
- Holds ten cylinders, five wide by two deep
- Two levels of welded Type 316 Stainless steel chains
- Snaps for each cylinder
- 12 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
16 Cylinders (4x4) - Stainless Steel - Barricade - Gas Cylinder Rack
USA Safety Model#: BR4X4SSFS
Cylinder capacity: 1-16
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
58"w
x
50"d x 30"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square Type 304 Stainless steel tube continuously seam welded
- Holds sixteen cylinders, four wide by four deep
- Two levels of welded Type 316 Stainless steel chains
- Snaps for each cylinder
- 10 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
15 Cylinders (5x3) - Stainless Steel - Barricade - Gas Cylinder Rack
USA Safety Model#: BR5X3SSFS
Cylinder capacity: 1-15
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
72"w
x
38"d x 30"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square Type 304 Stainless steel tube continuously seam welded
- Holds fifteen cylinders, five wide by three deep
- Two levels of welded Type 316 Stainless steel chains
- Snaps for each cylinder
- 12 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Indoor or outdoor bulk cylinder storage
- Made in the USA