Skip to Content
The store will not work correctly when cookies are disabled.
1-3 Cylinder Capacity - Cylinder Racks and Stands
-
1 Cylinder - Gas Cylinder Stand
USA Safety Model#: GR250RR
Stand capacity: 1 cylinder
Cylinder diameters: 7" - 9.5"
Gas Cylinder Stand dimensions (WxDxH):
17"w
x
18"d x 12"h
Stand Features:
- OSHA, NFPA (UFC) & CGA compliant
- Adjustable restraint bar holds cylinder 7"-9.5" diameter
- Cylinder is slightly elevated from floor
- Holds various cylinder sizes, for example: M60, MM, H, T
- Can be used for both commercial and industrial purposes
- Powder paint finish for durability
- Constructed from steel tubing and welded flat bracing
- Mounts to the floor (5/16" pre-drilled holes)
-
1 Cylinder - Heavy Duty - Gas Cylinder Stand
USA Safety Model#: GR181FS
Stand capacity: 1 cylinder
Cylinder diameters: 4" - 10"
Stand dimensions (WxDxH):
16"w
x
16"d x 15"h
Gas Cylinder Stand Features:
- OSHA, NFPA (UFC) & CGA compliant
- Fully welded cylinder stand
- Can be used for both commercial and industrial purposes
- Seven gauge (.187" thick) steel bar
- Powder-coat paint finish for durability
- Polypropylene strap and cinch buckle
- Equipment protected by steel reinforced vinyl edge guards
- Constructed from eleven gauge and heavier plate steel
- Mounts to the floor with three 3/8" anchor bolts (not included)
- Made in the USA
-
2 Cylinders - Poly - Gas Cylinder Stand
USA Safety Model#: GR7212YEEP
Stand capacity: 1-2 cylinders
Diameters supported: 3" to 12-3/8"
Load Capacity: 400 lbs
Stand dimensions (WxDxH):
14"w
x
28"d x 30"h
Gas Cylinder Stand Features:
- OSHA 29 CFR.1910 compliant
- Made with durable polyethylene
- Will not rust, corrode, or spark
- 2 nylon straps with ladder-slide style clip included
- Can be mounted to wall (hardware not included)
- Industrial and commercial use
- Made in the USA
-
2 Cylinders - Oxygen & Medical Gases (D,E) - Red - Cylinder Rack
USA Safety Model#: GRMDE2SRSC
Cylinder capacity: 2
Supported cylinder sizes: D, E (4.5" diameter)
Rack dimensions (WxDxH):
12"w
x
7"d x 21"h
Oxygen Tank Rack Features:
- Holds oxygen and other small medical gas tanks
- 5" square cylinder opening
- Cylinders are kept off of ground 0.25"
- All-welded steel construction
- Powder coated Red finish
- Made in the USA
-
2 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Rack
USA Safety Model#: GRMDE2SSC
Cylinder capacity: 2
Supported cylinder sizes: D, E (4.5" diameter)
Rack dimensions (WxDxH):
12"w
x
7"d x 21"h
Oxygen Tank Rack Features:
- Holds oxygen and other small medical gas tanks
- 5" square cylinder opening
- Cylinders are kept off of ground 0.25"
- All-welded steel construction
- Powder coated green finish
- Made in the USA
-
1 Cylinder - 2 Restraints - Gas Cylinder Stand
USA Safety Model#: GR175FS
Stand capacity: 1 cylinder
Cylinder diameters: 4"-12"
Stand dimensions (WxDxH):
19"w
x
13.5"d x 30"h
Gas Cylinder Stand Features:
- OSHA, NFPA (UFC) & CGA compliant
- Two polypropylene straps with cinch buckle
- Cylinder stand has fully welded construction
- Made from 11 gauge hot rolled steel
- Quality powder-coat paint finish for durability and chemical resistance
- Steel reinforced vinyl edge guards protect equipment
- Pre-drilled holes for mounting to the floor
- A chain set (Model # GB105FS) can be added to this product (optional)
- Industrial and commercial use
- Ships parcel or larger quantities ship by freight
- Made in the USA
-
2 Cylinders - Gas Cylinder Stand
USA Safety Model#: GR275FS
Stand capacity: 1-2 cylinders
Cylinder diameters: Up to 12"
Stand dimensions (WxDxH):
28"w
x
10.5"d x 30"h
Cylinder Stand Features:
- OSHA, NFPA (UFC) & CGA compliant
- Polypropylene strap and cinch buckle
- Gas cylinder stand fully welded
- Quality powder-coat paint finish for long service life
- Steel reinforced vinyl edge guards protect equipment
- Constructed from 11 gauge and heavier plate steel
- A chain set (Model # GB105FS) can be added to this product (optional)
- Industrial and commercial use
- Mounts to the floor or the wall
- Made in the USA
- Cylinder stand ships parcel rate or truck
-
3 Cylinders - Gas Cylinder Stand
USA Safety Model#: GR375FS
Stand capacity: 1-3 cylinders
Cylinder diameters: Up to 12"
Stand dimensions (WxDxH):
40"w
x
10.5"d x 30"h
Gas Cylinder Stand Features:
- OSHA, NFPA (UFC) & CGA compliant
- Industrial and commercial use cylinder stand
- 1.5" Polypropylene strap and cinch buckle
- Store acetylene, argon, butane, carbon dioxide (CO2), helium, hydrogen and nitrogen cylinders
- Cylinder stand made of fully welded construction
- Quality powder paint finish for long service life
- Steel reinforced vinyl edge guards protect equipment
- Constructed from 11 gauge and heavier plate steel
- A chain set (Model # GB105FS) can be added to this product (optional)
- Process control version also available
- Mounts to the floor or the wall
- Made in the USA
- Cylinder stand ships parcel oversized rate or freight
-
1 Cylinder - Truck Transport - Gas Cylinder Stand
USA Safety Model#: GR2175FS
Stand capacity: 1 cylinder
Cylinder diameters: 4"-10"
Stand dimensions (WxDxH):
16.75"w
x
10.5"d x 36"h
Gas Cylinder Stand Features:
- OSHA, NFPA (UFC) & CGA compliant
- Polypropylene strap and cinch buckle
- Cylinder stand has fully welded construction
- Quality powder-coat paint finish for long service life
- Steel reinforced vinyl edge guards protect equipment
- Constructed from 11 gauge and heavier plate steel
- Chain sets can be added for secondary support
- Vise-like holding capability with post and locking ring system
- Locking post can extend 40" to 66" height
- Use with cylinder cap (e.g. Model SC2501FS or DOT standard caps), not included
- Ideal system for over-the-road cylinder transportation
- Includes both high pressure and low pressure plates
- A chain set (Model # GB105FS) can be added to this product (optional)
- Industrial and commercial use
- Ships by parcel or larger quantities by freight
- Made in the USA
-
1 Cylinder - Process Station - Gas Cylinder Rack
USA Safety Model#: PR177FS
Cylinder capacity: 1
Cylinder diameters: Up to 12"
Cylinder rack dimensions (WxDxH):
18"w
x
13.75"d x 72"h
Cylinder Rack Features:
- OSHA, NFPA (UFC) & CGA compliant
- Two 1.5" Polypropylene straps and cinch buckle included
- Cylinder rack has fully welded construction
- Quality epoxy powder paint finish for long service life
- Steel reinforced vinyl edge guards protect cylinder
- Constructed from 11 gauge and heavier plate steel
- Elevated panel (14" by 12") allows for mounting of cylinder controls, cross-over devices, etc.
- A chain set (Model # GB105FS) can be added to this product (optional)
- Industrial and commercial use
- Made in the USA
-
2 Cylinders - Truck Transport - Gas Cylinder Stand
USA Safety Model#: GR2275FS
Stand capacity: 1-2 cylinders
Cylinder diameters: 4"-10"
Stand dimensions (WxDxH):
28"w
x
10.5"d x 36"h
Gas Cylinder Stand Features:
- OSHA, NFPA (UFC) & CGA compliant
- Polypropylene strap and cinch buckle
- Fully welded construction
- Quality powder-coat paint finish for long service life
- Steel reinforced vinyl edge guards protect equipment
- Cylinder stand constructed from 11 gauge and heavier plate steel
- Vise-like holding capability of the cylinder locking ring system
- Locking post can extend from 40" to 66" height
- Use with cylinder caps (Models SC2501FS or DOT standard caps), not included
- Ideal system for over-the-road cylinder transportation
- Includes both high pressure and low pressure plates
- A chain set (Model # GB105FS) can be added to this product (optional)
- Industrial and commercial use
- Ships parcel or larger quantities by freight
- Made in the USA
-
2 Cylinders - Process Station - Gas Cylinder Rack
USA Safety Model#: PR277FS
Cylinder capacity: 1-2
Cylinder diameters: Up to 12"
Cylinder rack dimensions (WxDxH):
28"w
x
12"d x 72"h
Cylinder Rack Features:
- OSHA, NFPA (UFC) & CGA compliant
- 1.5" Polypropylene strap and cinch buckle
- Cylinder rack has fully welded construction
- Quality epoxy powder paint finish for long service life
- Steel reinforced vinyl edge guards protect equipment
- Constructed from 11 gauge and heavier plate steel
- Elevated panel (28" by 14") allows for mounting of cylinder controls, cross-over devices, etc.
- A chain set (Model # GB105FS) can be added to this product (optional)
- Unit ships partially disassembled for freight savings & ease of use
- Unit ships LTL Freight
- Industrial and commercial use
- Made in the USA
-
1 Cylinder - Stainless Steel - Gas Cylinder Stand
USA Safety Model#: GR175SSFS
Stand capacity: 1 cylinder
Cylinder diameters: 4"-12"
Stand dimensions (WxDxH):
18"w
x
13.75"d x 30"h
Gas Cylinder Stand Features:
- OSHA, NFPA (UFC) & CGA compliant
- Polypropylene strap and cinch buckle
- Cylinder stand has fully welded construction
- Made from 12 gauge Type 304 Stainless Steel
- Steel reinforced vinyl edge guards protect equipment
- A chain set (Model # GB105FS) can be added to this product (optional)
- Industrial and commercial use
- Ships parcel
- Made in the USA
-
3 Cylinders - Process Station - Gas Cylinder Rack
USA Safety Model#: PR377FS
Rack capacity: 1-3 cylinders
Cylinder diameters: Up to 12"
Cylinder rack dimensions (WxDxH):
40"w
x
12"d x 72"h
Cylinder Rack Features:
- OSHA, NFPA (UFC) & CGA compliant
- 1.5" Polypropylene strap and cinch buckle
- Cylinder rack has fully welded construction
- Quality epoxy powder paint finish for long service life
- Steel reinforced vinyl edge guards protect equipment
- Constructed from 11 gauge and heavier plate steel
- Elevated panel (38.75" by 14") allows for mounting of cylinder controls, cross-over devices, etc.
- A chain set (Model # GB105FS) can be added to this product (optional)
- Unit ships partially disassembled for freight savings & ease of use
- Cylinder stand ships LTL freight
- Industrial and commercial use
- Made in the USA
-
1 Cylinder - Basic - Gas Cylinder Rack
USA Safety Model#: GRCR1SC
Cylinder capacity: 1
Cylinder diameters supported: Up to 9.5"
Cylinder rack dimensions (WxDxH):
13"w
x
13"d x 36"h
Cylinder Storage Rack Features:
- Fully welded 1.5" steel tube
- Holds one cylinder up to 9.5" in diameter
- One zinc plated 3/16" chain included
- Pre-drilled 0.5" floor mounting holes on flat iron base
- Finished with black powder paint
- Industrial and commercial use
- Made in the USA
-
2 Cylinders - Basic - Gas Cylinder Rack
USA Safety Model#: GRCR2SC
Cylinder capacity: 2
Cylinder diameters supported: Up to 9.5"
Cylinder rack dimensions (WxDxH):
13"w
x
21.5"d x 36"h
Cylinder Storage Rack Features:
- Fully welded 1.5" steel tube
- Holds two cylinders up to 9.5" in diameter
- One zinc plated 3/16" steel chain included
- Pre-drilled 0.5" floor mounting holes on flat iron base
- Finished with black powder paint
- Industrial and commercial use
- Made in the USA
-
1 Cylinder (1x1) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR1X1FS
Cylinder capacity: 1
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
16"w
x
16"d x 30"h
Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square steel tube continuously seam welded, 0.125" thick
- Two levels of welded steel chains (19" long each)
- 3 Pre-drilled 0.531" (14-mm) diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Industrial and commercial use
- Made in the USA
-
2 Cylinders (1x2) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR1X2FS
Cylinder capacity: 1-2
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
16"w
x
26"d x 30"h
Gas Tank Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds two cylinders, one wide by two deep
- Two levels of welded steel chains (19" long each)
- Snaps for each cylinder
- 4 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
3 Cylinders (1x3) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR1X3FS
Cylinder capacity: 1-3
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
16"w
x
38"d x 30"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds three cylinders, one wide by three deep
- Two levels of welded steel chains (19" long each)
- Snaps for each cylinder
- 4 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
2 Cylinders (2x1) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR2X1FS
Cylinder capacity: 1-2
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
30"w
x
16"d x 30"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds two cylinders, two wide by one deep
- Two levels of welded steel chains (19" long each)
- Snaps for each cylinder
- 3 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Cylinder rack sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
1 Cryogenic Tank (22" Dewar) - Liquid Gas Cylinder Rack
USA Safety Model#: BR1X1CRYO22
Cylinder capacity: 1
Cylinder diameters supported: 18"-22"
Cylinder rack dimensions (WxDxH):
28"w
x
26"d x 40"h
Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Typically used for cryogenic gases
- 2 levels of welded and steel chains
- Snaps to secure cylinder
- 2" square steel tube continuously seam welded, 0.125" thick surrounds cylinders
- 4 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Tube sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Industrial and commercial use
- Made in the USA
-
2 Cylinders - Stainless Steel - Gas Cylinder Stand
USA Safety Model#: GR275SSFS
Stand capacity: 1-2 cylinders
Cylinder diameters: Up to 12"
Stand dimensions (WxDxH):
28"w
x
12"d x 30"h
Cylinder Stand Features:
- OSHA, NFPA (UFC) & CGA compliant
- Polypropylene strap and nylon buckle
- Gas cylinder stand fully welded
- Constructed from Type 304 stainless steel
- Steel reinforced vinyl edge guards protect equipment
- A chain set (Model # GB105FS) can be added to this product (optional)
- Industrial and commercial use
- Mounts to the floor
- Made in the USA
- Cylinder stand ships UPS oversized rate or truck
-
2 Cylinders (1x2) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR1X2PSFS
Cylinder capacity: 1-2
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
16"w
x
26"d x 72"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds two cylinders, one wide by two deep
- Two levels of welded steel chains (19" long each)
- 4 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Gas cylinder rack includes snaps for each cylinder
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
2 Cylinders - Hoist Hook - Gas Cylinder Rack
USA Safety Model#: GRCR550SC
Cylinder capacity: 2
Cylinder diameters supported: Up to 12.5"
Weight Capacity: 1,000 lbs
Cylinder rack dimensions (WxDxH):
27.5"w
x
13.5"d x 62"h
Cylinder Storage Rack Features:
- Fully welded 1.5" square steel tubing
- Holds up to 2 cylinders up to 12.5" in diameter
- Hoist hook equipped
- 2 - 1/4" thick steel perma-clamps
- 3/16" steel baseplate (24"wx13"d)
- Finished with black powder paint
- Industrial and commercial use
- Made in the USA
-
3 Cylinders (3x1) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR3X1FS
Cylinder capacity: 1-3
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
44"w
x
16"d x 30"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds three cylinders, three wide by two deep
- Two levels of welded steel chains (19" long each)
- Snaps for each cylinder
- 4 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
1 Cryogenic Tank (33" Dewar) - Liquid Gas Cylinder Rack
USA Safety Model#: BR1X1CRYO33
Cylinder capacity: 1
Cylinder diameters supported: 18-33"
Cylinder rack dimensions (WxDxH):
38"w
x
36"d x 40"h
Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Typically used for cryogenic gases in dewar tanks
- 2 levels of welded and steel chains
- Snaps to secure cylinder
- 4 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- 2" square steel tube continuously seam welded, 0.125" thick surrounds cylinders
- Tube sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Industrial and commercial use
- Made in the USA
-
2 Cryogenic Tanks (22" Dewar) - Liquid Gas Cylinder Rack
USA Safety Model#: BR2X1CRYO22
Cylinder capacity: 1-2
Cylinder diameters supported: 18-22"
Cylinder rack dimensions (WxDxH):
54"w
x
26"d x 40"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Typically used for cryogenic gases in dewar tanks
- Holds two large cylinders, two wide by one deep
- 2 levels of welded and steel chains
- Snaps to secure cylinder
- 2" square steel tube continuously seam welded, 0.125" thick tube surrounds cylinders
- 6 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Tube sealed with exterior grade black powder-coat paint
- Industrial and commercial use
- Made in the USA
-
3 Cylinders (1x3) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR1X3PSFS
Cylinder capacity: 1-3
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
16"w
x
38"d x 72"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds three cylinders, one wide by three deep
- Two levels of welded steel chains (19" long each)
- 4 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Gas cylinder rack includes snaps for each cylinder
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
2 Cylinders (2x1) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR2X1PSFS
Cylinder capacity: 1-2
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
30"w
x
16"d x 72"h
Gas Cylinder Storage Rack Features:
- Cylinder rack meets USGS high seismic hazard zone requirements when installed properly
- Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square steel tube continuously seam welded
- Holds two cylinders, two wide by one deep
- Two levels of welded steel chains (19" long each)
- 3 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Gas cylinder rack includes snaps for each cylinder
- Sealed with exterior grade powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
2 Cylinders - Firewall - Gas Cylinder Rack
USA Safety Model#: GRCR500FWSC
Cylinder capacity: 2
Cylinder diameters supported: One 9.5" & one 12.5"
Weight Capacity: 1,000 lbs
Cylinder rack dimensions (WxDxH):
27"w
x
13.5"d x 60"h
Cylinder Storage Rack Features:
- Fully welded 1.5" square steel tubing
- Holds up to 2 cylinders up to 9.5" & 12.5" in diameter
- Firewall (1-hour rated) separates the two sides
- 3/16" steel baseplate (24"Wx13"D)
- One 1/4" thick steel perma-clamp
- Finished with black paint
- Industrial and commercial use
- Made in the USA
-
1 Propane Tank (20-100lb) - Adjustable Shelf - Gas Cylinder Vise
USA Safety Model#: GRACVAM
Stand capacity: 1 cylinder
Cylinder diameters: 12"-15"
Stand dimensions (WxDxH):
13"w
x
14"d x 36"h
Gas Cylinder Stand Features:
- Made from high quality aluminum
- Mounts to the floor or the wall
- Adjustable shelf made from aluminum diamond plate
- 5,000 lb tested nylon ratchet strap included
- High density, no-maring cushion pads for cylinder to press against
- Use as a vice when replacing cylinder valves
- Industrial and commercial use
- Made in the USA
-
2 Cylinders - Firewall - Hoist Hook - Gas Cylinder Rack
USA Safety Model#: GRCR550FWSC
Cylinder capacity: 2
Cylinder diameters supported: Up to 12.5"
Weight Capacity: 1,000 lbs
Cylinder rack dimensions (WxDxH):
27"w
x
13.5"d x 62"h
Cylinder Storage Rack Features:
- Fully welded 1.5" square steel tubing
- Holds up to 2 cylinders up to 12.5" in diameter
- Firewall (1-hour rated) separates the two sides
- Hoist hook equipped
- 2 - 1/4" thick steel perma-clamps
- 3/16" steel baseplate (24"wx13"d)
- Finished with black paint
- Industrial and commercial use
- Made in the USA
-
3 Cylinders (3x1) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR3X1PSFS
Cylinder capacity: 1-3
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
44"w
x
16"d x 72"h
Product Features:
- Cylinder rack meets USGS high seismic hazard zone requirements when installed properly
- Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square steel tube continuously seam welded
- Holds three cylinders, three wide by one deep
- Two levels of welded steel chains (19" long each)
- 4 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Gas cylinder rack includes snaps for each cylinder
- Sealed with exterior grade powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
2 Cryogenic Tanks (33" Dewar) - Liquid Gas Cylinder Rack
USA Safety Model#: BR2X1CRYO33
Cylinder capacity: 1-2
Cylinder diameters supported: 18-33"
Cylinder rack dimensions (WxDxH):
74"w
x
36"d x 40"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Typically used for cryogenic gases in dewar tanks
- Holds two large cylinders, two wide by one deep
- 2 levels of welded and steel chains
- Snaps to secure cylinder
- 2" square steel tube continuously seam welded, 0.125" thick surrounds cylinders
- 6 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Tube sealed with exterior grade black powder-coat paint
- Industrial and commercial use
- Made in the USA
Shop By
Shopping Options
Outdoor/Weather Resistant
