5+ Cylinders Wide Racks - Cylinder Racks and Stands

7 Items

per page
Set Descending Direction
  1. 12 Cylinders - Basic - Gas Cylinder Rack
    12 Cylinders - Basic - Gas Cylinder Rack
    USA Safety Model#: GRCR12SC
    Cylinder capacity: 12
    Cylinder diameters supported: Up to 9.5"
    Cylinder rack dimensions (WxDxH): 64.5"w x 21.5"d x 36"h

    Cylinder Storage Rack Features:
    • Fully welded 1.5" steel tube
    • Holds up to 12 cylinders up to 9.5" in diameter
    • Two chains included
    • Pre-drilled 0.5" floor mounting holes on flat iron base
    • Finished with black powder paint
    • Industrial and commercial use
    • Made in the USA
    $695.00
  2. 5 Cylinders (5x1) - Barricade - Gas Cylinder Rack
    5 Cylinders (5x1) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR5X1FS
    Cylinder capacity: 1-5
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 72"w x 16"d x 30"h

    Gas Cylinder Storage Rack Features:
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Holds five cylinders, five wide by one deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 6 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,700.00
  3. 5 Cylinders (5x1) - Barricade - Process Station - Gas Cylinder Rack
    5 Cylinders (5x1) - Barricade - Process Station - Gas Cylinder Rack
    USA Safety Model#: BR5X1PSFS
    Cylinder capacity: 1-5
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 72"w x 16"d x 72"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds five cylinders, five wide by one deep
    • Two levels of welded steel chains
    • 6 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Gas cylinder rack includes snaps for each cylinder
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,910.00
  4. 10 Cylinders (5x2) - Barricade Gas Cylinder Rack
    10 Cylinders (5x2) - Barricade Gas Cylinder Rack
    USA Safety Model#: BR5X2FS
    Cylinder capacity: 1-10
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 72"w x 26"d x 30"h

    Gas Cylinder Storage Rack Features:
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Holds ten cylinders, five wide by two deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 12 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $2,100.00
  5. 10 Cylinders (5x2) - Barricade - Process Station - Gas Cylinder Rack
    10 Cylinders (5x2) - Barricade - Process Station - Gas Cylinder Rack
    USA Safety Model#: BR5X2PSFS
    Cylinder capacity: 1-10
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 72"w x 26"d x 72"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds ten cylinders, five wide by two deep
    • Two levels of welded steel chains
    • 12 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Gas cylinder rack includes snaps for each cylinder
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $2,200.00
  6. 15 Cylinders (5x3) - Barricade Gas Cylinder Rack
    15 Cylinders (5x3) - Barricade Gas Cylinder Rack
    USA Safety Model#: BR5X3FS
    Cylinder capacity: 1-15
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 72"w x 38"d x 30"h

    Gas Cylinder Storage Rack Features:
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Holds fifteen cylinders, five wide by three deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 12 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $2,300.00
  7. 20 Cylinders (5x4) - Barricade Gas Cylinder Rack
    20 Cylinders (5x4) - Barricade Gas Cylinder Rack
    USA Safety Model#: BR5X4FS
    Cylinder capacity: 1-20
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 72"w x 50"d x 30"h

    Gas Cylinder Storage Rack Features:
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Holds twenty cylinders, five wide by four deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 12 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $3,100.00

7 Items

per page
Set Descending Direction
Clear All