Skip to Content
The store will not work correctly when cookies are disabled.
2 Cylinders Wide - Cylinder Racks and Stands
-
4 Cylinders - Oxygen & Medical (M60) - Cylinder Rack
USA Safety Model#: GR245RR
Cylinder capacity: 4
Supported cylinder sizes: M60 (7.25" diameter)
Oxygen Tank Rack dimensions (WxDxH):
17.75"w
x
15.5"d x 10.25"h
Medical Oxygen Tank Rack Features:
- Holds oxygen and other medical gas tanks
- 7.28" square cylinder opening
- Cylinders are kept off of ground approximately 1/4 inch
- All welded steel construction
- ASTM A513 steel supports
- Powder coated black finish
- Ships parcel
-
2 Cylinders - Poly - Gas Cylinder Stand
USA Safety Model#: GR7212YEEP
Stand capacity: 1-2 cylinders
Diameters supported: 3" to 12-3/8"
Load Capacity: 400 lbs
Stand dimensions (WxDxH):
14"w
x
28"d x 30"h
Gas Cylinder Stand Features:
- OSHA 29 CFR.1910 compliant
- Made with durable polyethylene
- Will not rust, corrode, or spark
- 2 nylon straps with ladder-slide style clip included
- Can be mounted to wall (hardware not included)
- Industrial and commercial use
- Made in the USA
-
2 Cylinders - Oxygen & Medical Gases (D,E) - Red - Cylinder Rack
USA Safety Model#: GRMDE2SRSC
Cylinder capacity: 2
Supported cylinder sizes: D, E (4.5" diameter)
Rack dimensions (WxDxH):
12"w
x
7"d x 21"h
Oxygen Tank Rack Features:
- Holds oxygen and other small medical gas tanks
- 5" square cylinder opening
- Cylinders are kept off of ground 0.25"
- All-welded steel construction
- Powder coated Red finish
- Made in the USA
-
2 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Rack
USA Safety Model#: GRMDE2SSC
Cylinder capacity: 2
Supported cylinder sizes: D, E (4.5" diameter)
Rack dimensions (WxDxH):
12"w
x
7"d x 21"h
Oxygen Tank Rack Features:
- Holds oxygen and other small medical gas tanks
- 5" square cylinder opening
- Cylinders are kept off of ground 0.25"
- All-welded steel construction
- Powder coated green finish
- Made in the USA
-
6 Cylinders - Oxygen & Medical Gases (M6) - Green - Cylinder Rack
USA Safety Model#: GRMM66SSC
Cylinder capacity: 6
Supported cylinder sizes: M6 (3.25" diameter)
Rack dimensions (WxDxH):
13.5"w
x
9.5"d x 24"h
Oxygen Tank Rack Features:
- Holds oxygen and other medical gas tanks
- 3.5" square cylinder opening
- Cylinders are kept off of ground on elevated shelf
- All-welded steel construction
- Pre-drilled 1/2" holes in flat iron base
- Powder coated green finish
- Made in the USA
-
4 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Rack
USA Safety Model#: GRMDE4SSC
Cylinder capacity: 4
Supported cylinder sizes: D, E (4.5" diameter)
Rack dimensions (WxDxH):
13"w
x
13"d x 21"h
Oxygen Tank Rack Features:
- Holds oxygen and other medical gas tanks
- 5" square cylinder opening
- Cylinders are kept off of ground 0.25"
- All-welded steel construction
- Pre-drilled 1/2" holes in flat iron base
- Powder coated green finish
- Made in the USA
-
2 Cylinders - Gas Cylinder Stand
USA Safety Model#: GR275FS
Stand capacity: 1-2 cylinders
Cylinder diameters: Up to 12"
Stand dimensions (WxDxH):
28"w
x
10.5"d x 30"h
Cylinder Stand Features:
- OSHA, NFPA (UFC) & CGA compliant
- Polypropylene strap and cinch buckle
- Gas cylinder stand fully welded
- Quality powder-coat paint finish for long service life
- Steel reinforced vinyl edge guards protect equipment
- Constructed from 11 gauge and heavier plate steel
- A chain set (Model # GB105FS) can be added to this product (optional)
- Industrial and commercial use
- Mounts to the floor or the wall
- Made in the USA
- Cylinder stand ships parcel rate or truck
-
4 Cylinders - Oxygen & Medical Gases (D,E) - Red - Cylinder Rack
USA Safety Model#: GRMDE4SRSC
Cylinder capacity: 4
Supported cylinder sizes: D, E (4.5" diameter)
Rack dimensions (WxDxH):
13"w
x
13"d x 21"h
Oxygen Tank Rack Features:
- Holds oxygen and other medical gas tanks
- 5" square cylinder opening
- Cylinders are kept off of ground 0.25"
- All-welded steel construction
- Pre-drilled 1/2" holes in flat iron base
- Powder coated Red finish
- Made in the USA
-
4 Cylinders - Poly - Gas Cylinder Stand
USA Safety Model#: GR7213YEEP
Stand capacity: 1-4 cylinders
Diameters supported: 3" to 11-3/8"
Load Capacity: 800 lbs
Stand dimensions (WxDxH):
29"w
x
41"d x 46.5"h
Gas Cylinder Stand Features:
- OSHA 29 CFR.1910 compliant
- Made with durable polyethylene
- Will not rust, corrode, or spark
- 4 nylon straps with ladder slide style clip included
- Add Lower Straps (optional) - Model # AC7205BKEP
- Industrial and commercial use
- Made in the USA
-
2 Cylinders - Truck Transport - Gas Cylinder Stand
USA Safety Model#: GR2275FS
Stand capacity: 1-2 cylinders
Cylinder diameters: 4"-10"
Stand dimensions (WxDxH):
28"w
x
10.5"d x 36"h
Gas Cylinder Stand Features:
- OSHA, NFPA (UFC) & CGA compliant
- Polypropylene strap and cinch buckle
- Fully welded construction
- Quality powder-coat paint finish for long service life
- Steel reinforced vinyl edge guards protect equipment
- Cylinder stand constructed from 11 gauge and heavier plate steel
- Vise-like holding capability of the cylinder locking ring system
- Locking post can extend from 40" to 66" height
- Use with cylinder caps (Models SC2501FS or DOT standard caps), not included
- Ideal system for over-the-road cylinder transportation
- Includes both high pressure and low pressure plates
- A chain set (Model # GB105FS) can be added to this product (optional)
- Industrial and commercial use
- Ships parcel or larger quantities by freight
- Made in the USA
-
2 Cylinders - Process Station - Gas Cylinder Rack
USA Safety Model#: PR277FS
Cylinder capacity: 1-2
Cylinder diameters: Up to 12"
Cylinder rack dimensions (WxDxH):
28"w
x
12"d x 72"h
Cylinder Rack Features:
- OSHA, NFPA (UFC) & CGA compliant
- 1.5" Polypropylene strap and cinch buckle
- Cylinder rack has fully welded construction
- Quality epoxy powder paint finish for long service life
- Steel reinforced vinyl edge guards protect equipment
- Constructed from 11 gauge and heavier plate steel
- Elevated panel (28" by 14") allows for mounting of cylinder controls, cross-over devices, etc.
- A chain set (Model # GB105FS) can be added to this product (optional)
- Unit ships partially disassembled for freight savings & ease of use
- Unit ships LTL Freight
- Industrial and commercial use
- Made in the USA
-
4 Propane Tanks (33 LB) - Outdoor - Horizontal Storage - Steel - Gas Cylinder Rack
USA Safety Model#: GR04202SAAM
Rack capacity: 4 cylinders (33 lb) of 12.5" diameter
Propane Tank Rack dimensions (WxDxH):
30"w
x
27"d x 35"h
Gas Cylinder Rack Features:
- Frame and shelf made from galvannealed steel
- Pre-drilled holes (13/16") for anchoring each foot pad
- Unit is powder coated with outdoor grade paint for extra durability
- Ships assembled ready for use
- Product bolts together and can be disassembled
- Made in the USA
-
4 Cylinders - Gas Cylinder Stand
USA Safety Model#: GR400FS
Stand capacity: 1-4 cylinders
Diameters supported: Up to 12"
Stand dimensions (WxDxH):
32"w
x
23"d x 30"h
Cylinder Stand Features:
- OSHA, NFPA (UFC) & CGA compliant
- Cylinder rack has 1.5" Polypropylene strap and cinch buckle
- Fully welded construction
- Quality powder-coat paint finish for long service life
- Steel reinforced vinyl edge guards protect equipment
- Constructed from 11 gauge and heavier plate steel
- Designed to mount to floor with four fasteners
- A chain set (Model # GB105FS) can be added to this product (optional)
- Dual straps support each cylinder
- Industrial and commercial use
- Made in the USA
-
4 Cylinders - Basic - Gas Cylinder Rack
USA Safety Model#: GRCR4SC
Cylinder capacity: 4
Cylinder diameters supported: Up to 9.5"
Cylinder rack dimensions (WxDxH):
23"w
x
21.5"d x 36"h
Cylinder Storage Rack Features:
- Fully welded 1.5" steel tube
- Holds up to 4 cylinders up to 9.5" in diameter
- One zinc plated 3/16" steel chain included
- Pre-drilled 0.5" floor mounting holes on flat iron base
- Finished with black powder paint
- Industrial and commercial use
- Made in the USA
-
36 Cylinders - Oxygen & Medical Gases (M6) - Green - Cylinder Rack
USA Safety Model#: GRMM636SSC
Cylinder capacity: 36
Supported cylinder sizes: M6 (3.25" diameter)
Rack dimensions (WxDxH):
42.5"w
x
17.5"d x 35"h
Oxygen Tank Rack Features:
- Holds oxygen and other medical gas tanks
- 3.5" square cylinder opening
- Cylinders are kept off of ground on elevated shelf
- All-welded steel construction
- Pre-drilled 1/2" holes in flat iron base
- Powder coated green finish
- Made in the USA
-
8 Propane Tanks (33 LB) - Outdoor - Horizontal Storage - Steel - Gas Cylinder Rack
USA Safety Model#: GR08202MAAM
Rack capacity: 8 cylinders (33 lb) of 12.5" diameter
Propane Tank Rack dimensions (WxDxH):
30"w
x
27"d x 50"h
Gas Cylinder Rack Features:
- Frame and shelf made from galvannealed steel
- Pre-drilled holes (13/16") for anchoring each foot pad
- Unit is powder coated with outdoor grade paint for extra durability
- Ships assembled ready for use
- Product bolts together and can be disassembled
- Made in the USA
-
2 Cylinders (2x1) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR2X1FS
Cylinder capacity: 1-2
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
30"w
x
16"d x 30"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds two cylinders, two wide by one deep
- Two levels of welded steel chains (19" long each)
- Snaps for each cylinder
- 3 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Cylinder rack sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
2 Cylinders - Stainless Steel - Gas Cylinder Stand
USA Safety Model#: GR275SSFS
Stand capacity: 1-2 cylinders
Cylinder diameters: Up to 12"
Stand dimensions (WxDxH):
28"w
x
12"d x 30"h
Cylinder Stand Features:
- OSHA, NFPA (UFC) & CGA compliant
- Polypropylene strap and nylon buckle
- Gas cylinder stand fully welded
- Constructed from Type 304 stainless steel
- Steel reinforced vinyl edge guards protect equipment
- A chain set (Model # GB105FS) can be added to this product (optional)
- Industrial and commercial use
- Mounts to the floor
- Made in the USA
- Cylinder stand ships UPS oversized rate or truck
-
4 Cylinders - Back-to-Back Process Station - Gas Cylinder Stand
USA Safety Model#: PR400PFS
Stand capacity: 1-4 cylinders
Diameters supported: Up to 12"
Stand dimensions (WxDxH):
40"w
x
24"d x 72"h
Cylinder Stand Features:
- OSHA, NFPA (UFC) & CGA compliant
- Cylinder rack has 1.5" Polypropylene strap and cinch buckle
- Fully welded construction
- Quality powder paint finish for long service life
- Steel reinforced vinyl edge guards protect equipment
- Constructed from 11 gauge and heavier plate steel
- Designed to mount to floor with four fasteners
- A chain set (Model # GB105FS) can be added to this product (optional)
- Dual straps support each cylinder
- Ships partially assembled for UPS shipping capability
- Industrial and commercial use
- Made in the USA
-
4 Cylinders (2x2) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR2X2FS
Cylinder capacity: 1-4
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
30"w
x
26"d x 30"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds four cylinders, two wide by two deep
- Two levels of welded steel chains (19" long each)
- 6 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Gas cylinder rack includes snaps for each cylinder
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
2 Cylinders - Hoist Hook - Gas Cylinder Rack
USA Safety Model#: GRCR550SC
Cylinder capacity: 2
Cylinder diameters supported: Up to 12.5"
Weight Capacity: 1,000 lbs
Cylinder rack dimensions (WxDxH):
27.5"w
x
13.5"d x 62"h
Cylinder Storage Rack Features:
- Fully welded 1.5" square steel tubing
- Holds up to 2 cylinders up to 12.5" in diameter
- Hoist hook equipped
- 2 - 1/4" thick steel perma-clamps
- 3/16" steel baseplate (24"wx13"d)
- Finished with black powder paint
- Industrial and commercial use
- Made in the USA
-
6 Propane Tanks (33 LB) - Outdoor - Horizontal Storage - Steel - Gas Cylinder Rack
USA Safety Model#: GR06202SAAM
Rack capacity: 6 cylinders (33 lb) of 12.5" diameter
Propane Tank Rack dimensions (WxDxH):
30"w
x
27"d x 35"h
Gas Cylinder Rack Features:
- Frame and shelf made from galvannealed steel
- Pre-drilled holes (13/16") for anchoring each foot pad
- Unit is powder coated with outdoor grade paint for extra durability
- Ships assembled ready for use
- Product bolts together and can be disassembled
- Made in the USA
-
2 Cryogenic Tanks (22" Dewar) - Liquid Gas Cylinder Rack
USA Safety Model#: BR2X1CRYO22
Cylinder capacity: 1-2
Cylinder diameters supported: 18-22"
Cylinder rack dimensions (WxDxH):
54"w
x
26"d x 40"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Typically used for cryogenic gases in dewar tanks
- Holds two large cylinders, two wide by one deep
- 2 levels of welded and steel chains
- Snaps to secure cylinder
- 2" square steel tube continuously seam welded, 0.125" thick tube surrounds cylinders
- 6 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Tube sealed with exterior grade black powder-coat paint
- Industrial and commercial use
- Made in the USA
-
2 Cylinders (2x1) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR2X1PSFS
Cylinder capacity: 1-2
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
30"w
x
16"d x 72"h
Gas Cylinder Storage Rack Features:
- Cylinder rack meets USGS high seismic hazard zone requirements when installed properly
- Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square steel tube continuously seam welded
- Holds two cylinders, two wide by one deep
- Two levels of welded steel chains (19" long each)
- 3 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Gas cylinder rack includes snaps for each cylinder
- Sealed with exterior grade powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
2 Cylinders - Firewall - Gas Cylinder Rack
USA Safety Model#: GRCR500FWSC
Cylinder capacity: 2
Cylinder diameters supported: One 9.5" & one 12.5"
Weight Capacity: 1,000 lbs
Cylinder rack dimensions (WxDxH):
27"w
x
13.5"d x 60"h
Cylinder Storage Rack Features:
- Fully welded 1.5" square steel tubing
- Holds up to 2 cylinders up to 9.5" & 12.5" in diameter
- Firewall (1-hour rated) separates the two sides
- 3/16" steel baseplate (24"Wx13"D)
- One 1/4" thick steel perma-clamp
- Finished with black paint
- Industrial and commercial use
- Made in the USA
-
6 Cylinders (2x3) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR2X3FS
Cylinder capacity: 1-6
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
30"w
x
38"d x 30"h
Gas Cylinder Storage Rack Features:
- Store acetylene, argon, butane, carbon dioxide (CO2), helium, hydrogen and nitrogen cylinders
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds six cylinders, two wide by three deep
- Two levels of welded steel chains (19" long each)
- Snaps for each cylinder
- 6 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk gas cylinder storage
- Made in the USA
-
4 Cylinders (2x2) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR2X2PSFS
Cylinder capacity: 1-4
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
30"w
x
26"d x 72"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Process Station: 2 strut mounting rails at 67 and 72 inch height from the floo
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds four cylinders, two wide by two deep
- Two levels of welded steel chains (19" long each)
- 6 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Gas cylinder rack includes snaps for each cylinder
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
8 Cylinders (2x4) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR2X4FS
Cylinder capacity: 1-8
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
30"w
x
50"d x 30"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square steel tube continuously seam welded, 0.125" thick
- Two levels of welded steel chains (19" long each)
- Holds eight cylinders, two wide by four deep
- Snaps for each cylinder
- 6 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
2 Cylinders - Firewall - Hoist Hook - Gas Cylinder Rack
USA Safety Model#: GRCR550FWSC
Cylinder capacity: 2
Cylinder diameters supported: Up to 12.5"
Weight Capacity: 1,000 lbs
Cylinder rack dimensions (WxDxH):
27"w
x
13.5"d x 62"h
Cylinder Storage Rack Features:
- Fully welded 1.5" square steel tubing
- Holds up to 2 cylinders up to 12.5" in diameter
- Firewall (1-hour rated) separates the two sides
- Hoist hook equipped
- 2 - 1/4" thick steel perma-clamps
- 3/16" steel baseplate (24"wx13"d)
- Finished with black paint
- Industrial and commercial use
- Made in the USA
-
6 Cylinders (2x3) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR2X3PSFS
Cylinder capacity: 1-6
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
30"w
x
38"d x 72"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds six cylinders, two wide by three deep
- Two levels of welded steel chains (19" long each)
- 6 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Gas cylinder rack includes snaps for each cylinder
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
2 Cryogenic Tanks (33" Dewar) - Liquid Gas Cylinder Rack
USA Safety Model#: BR2X1CRYO33
Cylinder capacity: 1-2
Cylinder diameters supported: 18-33"
Cylinder rack dimensions (WxDxH):
74"w
x
36"d x 40"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Typically used for cryogenic gases in dewar tanks
- Holds two large cylinders, two wide by one deep
- 2 levels of welded and steel chains
- Snaps to secure cylinder
- 2" square steel tube continuously seam welded, 0.125" thick surrounds cylinders
- 6 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Tube sealed with exterior grade black powder-coat paint
- Industrial and commercial use
- Made in the USA
-
6 Cylinders - 16" Hinged Ramp - Gas Bottle Pallet Rack
USA Safety Model#: GP2106FS
Pallet capacity: 6
Cylinder diameters: 6"-10"
Pallet dimensions (WxDxH):
24"w
x
36"d x 37"h
Gas Tank Pallet Features:
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Fits 6 cylinders up to 10.25" diameter or smaller
- 16" hinged ramp welded onto pallet (24"Wx16"D)
- Two-way, fully enclosed forklift channels (3"H X 8"W)
- Rack is built from 1"x2" steel tube continuously seam welded
- Two levels of welded steel chains
- Snaps for each cylinder
- Pallet welded from 11 gauge steel
- Quality powder-coat paint finish for long service life & non-skid surface
- Made in the USA
Shop By
Shopping Options
Outdoor/Weather Resistant
