Cylinder Racks and Stands

85 Items

per page
Set Descending Direction
  1. 2 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Rack
    2 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Rack
    USA Safety Model#: GRMDE2SSC
    Cylinder capacity: 2
    Supported cylinder sizes: D, E (4.5" diameter)
    Rack dimensions (WxDxH): 12"w x 7"d x 21"h

    Oxygen Tank Rack Features:
    • Holds oxygen and other small medical gas tanks
    • 5" square cylinder opening
    • Cylinders are kept off of ground 0.25"
    • All-welded steel construction
    • Powder coated green finish
    • Made in the USA
    $190.00
  2. 1 Cylinder - Heavy Duty - Gas Cylinder Stand
    1 Cylinder - Heavy Duty - Gas Cylinder Stand
    USA Safety Model#: GR181FS
    Stand capacity: 1 cylinder
    Cylinder diameters: 4" - 10"
    Stand dimensions (WxDxH): 16"w x 16"d x 15"h

    Gas Cylinder Stand Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • Fully welded cylinder stand
    • Can be used for both commercial and industrial purposes
    • Seven gauge (.187" thick) steel bar
    • Powder-coat paint finish for durability
    • Polypropylene strap and cinch buckle
    • Equipment protected by steel reinforced vinyl edge guards
    • Constructed from eleven gauge and heavier plate steel
    • Mounts to the floor with three 3/8" anchor bolts (not included)
    • Made in the USA
    $220.00
  3. 4 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Rack
    4 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Rack
    USA Safety Model#: GRMDE4SSC
    Cylinder capacity: 4
    Supported cylinder sizes: D, E (4.5" diameter)
    Rack dimensions (WxDxH): 13"w x 13"d x 21"h

    Oxygen Tank Rack Features:
    • Holds oxygen and other medical gas tanks
    • 5" square cylinder opening
    • Cylinders are kept off of ground 0.25"
    • All-welded steel construction
    • Pre-drilled 1/2" holes in flat iron base
    • Powder coated green finish
    • Made in the USA
    $235.00
  4. 1 Cylinder - 2 Restraints - Gas Cylinder Stand
    1 Cylinder - 2 Restraints - Gas Cylinder Stand
    USA Safety Model#: GR175FS
    Stand capacity: 1 cylinder
    Cylinder diameters: 4"-12"
    Stand dimensions (WxDxH): 19"w x 13.5"d x 30"h

    Gas Cylinder Stand Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • Two polypropylene straps with cinch buckle
    • Cylinder stand has fully welded construction
    • Made from 11 gauge hot rolled steel
    • Quality powder-coat paint finish for durability and chemical resistance
    • Steel reinforced vinyl edge guards protect equipment
    • Pre-drilled holes for mounting to the floor
    • A chain set (Model # GB105FS) can be added to this product (optional)
    • Industrial and commercial use
    • Ships parcel or larger quantities ship by freight
    • Made in the USA
    $240.00
  5. 6 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Rack
    6 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Rack
    USA Safety Model#: GRMDE6SSC
    Cylinder capacity: 6
    Supported cylinder sizes: D, E (4.5" diameter)
    Rack dimensions (WxDxH): 18.5"w x 12"d x 21"h

    Oxygen Tank Rack Features:
    • Holds oxygen and other medical gas tanks
    • 5" square cylinder opening
    • Cylinders are kept off of ground 0.25"
    • All-welded steel construction
    • Pre-drilled 1/2" holes in flat iron base
    • Powder coated green finish
    • Ships parcel
    • Made in the USA
    $245.00
  6. 4 Cylinders - Oxygen & Medical Gases (D,E) - Red - Cylinder Rack
    4 Cylinders - Oxygen & Medical Gases (D,E) - Red - Cylinder Rack
    USA Safety Model#: GRMDE4SRSC
    Cylinder capacity: 4
    Supported cylinder sizes: D, E (4.5" diameter)
    Rack dimensions (WxDxH): 13"w x 13"d x 21"h

    Oxygen Tank Rack Features:
    • Holds oxygen and other medical gas tanks
    • 5" square cylinder opening
    • Cylinders are kept off of ground 0.25"
    • All-welded steel construction
    • Pre-drilled 1/2" holes in flat iron base
    • Powder coated Red finish
    • Made in the USA
    $260.00
  7. 2 Cylinders - Gas Cylinder Stand
    2 Cylinders - Gas Cylinder Stand
    USA Safety Model#: GR275FS
    Stand capacity: 1-2 cylinders
    Cylinder diameters: Up to 12"
    Stand dimensions (WxDxH): 28"w x 10.5"d x 30"h

    Cylinder Stand Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • Polypropylene strap and cinch buckle
    • Gas cylinder stand fully welded
    • Quality powder-coat paint finish for long service life
    • Steel reinforced vinyl edge guards protect equipment
    • Constructed from 11 gauge and heavier plate steel
    • A chain set (Model # GB105FS) can be added to this product (optional)
    • Industrial and commercial use
    • Mounts to the floor or the wall
    • Made in the USA
    • Cylinder stand ships UPS oversized rate or truck
    $285.00
  8. 6 Cylinders - Oxygen & Medical Gases (D,E) - Red - Cylinder Rack
    6 Cylinders - Oxygen & Medical Gases (D,E) - Red - Cylinder Rack
    USA Safety Model#: GRMDE6SRSC
    Cylinder capacity: 6
    Supported cylinder sizes: D, E (4.5" diameter)
    Rack dimensions (WxDxH): 18.5"w x 12"d x 21"h

    Oxygen Tank Rack Features:
    • Holds oxygen and other medical gas tanks
    • 5" square cylinder opening
    • Cylinders are kept off of ground 0.25"
    • All-welded steel construction
    • Pre-drilled 1/2" holes in flat iron base
    • Powder coated Red finish
    • Ships parcel
    • Made in the USA
    $285.00
  9. 3 Cylinders - Gas Cylinder Stand
    3 Cylinders - Gas Cylinder Stand
    USA Safety Model#: GR375FS
    Stand capacity: 1-3 cylinders
    Cylinder diameters: Up to 12"
    Stand dimensions (WxDxH): 40"w x 10.5"d x 30"h

    Gas Cylinder Stand Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • Industrial and commercial use cylinder stand
    • 1.5" Polypropylene strap and cinch buckle
    • Store acetylene, argon, butane, carbon dioxide (CO2), helium, hydrogen and nitrogen cylinders
    • Cylinder stand made of fully welded construction
    • Quality powder paint finish for long service life
    • Steel reinforced vinyl edge guards protect equipment
    • Constructed from 11 gauge and heavier plate steel
    • A chain set (Model # GB105FS) can be added to this product (optional)
    • Process control version also available
    • Mounts to the floor or the wall
    • Made in the USA
    • Cylinder stand ships parcel oversized rate or freight
    $350.00
  10. 12 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Rack
    12 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Rack
    USA Safety Model#: GRMDE12SSC
    Cylinder capacity: 12
    Supported cylinder sizes: D, E (4.5" diameter)
    Rack dimensions (WxDxH): 23.5"w x 17"d x 21"h

    Oxygen Tank Rack Features:
    • Holds oxygen and other medical gas tanks
    • 5" square cylinder opening
    • Cylinders are kept off of ground 0.25"
    • All-welded steel construction
    • Pre-drilled 1/2" holes in flat iron base
    • Powder coated green finish
    • Made in the USA
    $355.00
  11. 1 Cylinder - Truck Transport - Gas Cylinder Stand
    1 Cylinder - Truck Transport - Gas Cylinder Stand
    USA Safety Model#: GR2175FS
    Stand capacity: 1 cylinder
    Cylinder diameters: 4"-10"
    Stand dimensions (WxDxH): 16.75"w x 10.5"d x 36"h

    Gas Cylinder Stand Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • Polypropylene strap and cinch buckle
    • Cylinder stand has fully welded construction
    • Quality powder-coat paint finish for long service life
    • Steel reinforced vinyl edge guards protect equipment
    • Constructed from 11 gauge and heavier plate steel
    • Chain sets can be added for secondary support
    • Vise-like holding capability with post and locking ring system
    • Locking post can extend 40" to 66" height
    • Use of safety cylinder caps (Models SC2500FS or DOT standard caps)
    • Ideal system for over-the-road cylinder transportation
    • Includes both high pressure and low pressure plates
    • A chain set (Model # GB105FS) can be added to this product (optional)
    • Industrial and commercial use
    • Ships by parcel or larger quantities by freight
    • Made in the USA
    $395.00
  12. 12 Cylinders - Oxygen & Medical Gases (D,E) - Red - Cylinder Rack
    12 Cylinders - Oxygen & Medical Gases (D,E) - Red - Cylinder Rack
    USA Safety Model#: GRMDE12SRSC
    Cylinder capacity: 12
    Supported cylinder sizes: D, E (4.5" diameter)
    Rack dimensions (WxDxH): 23.5"w x 17"d x 21"h

    Oxygen Tank Rack Features:
    • Holds oxygen and other medical gas tanks
    • 5" square cylinder opening
    • Cylinders are kept off of ground 0.25"
    • All-welded steel construction
    • Pre-drilled 1/2" holes in flat iron base
    • Powder coated red finish
    • Made in the USA
    $395.00
  13. 4 Propane Tanks (33 LB) - Outdoor - Horizontal Storage - Steel - Gas Cylinder Rack
    4 Propane Tanks (33 LB) - Outdoor - Horizontal Storage - Steel - Gas Cylinder Rack
    USA Safety Model#: GR04202SAAM
    Rack capacity: 4 cylinders (33 lb) of 12.5" diameter
    Propane Tank Rack dimensions (WxDxH): 30"w x 27"d x 35"h

    Gas Cylinder Rack Features:
    • Frame and shelf made from galvannealed steel
    • Pre-drilled holes (13/16") for anchoring each foot pad
    • Unit is powder coated with outdoor grade paint for extra durability
    • Ships assembled ready for use
    • Product bolts together and can be disassembled
    • Made in the USA
    $425.00
  14. 1 Cylinder - Process Station - Gas Cylinder Rack
    1 Cylinder - Process Station - Gas Cylinder Rack
    USA Safety Model#: PR177FS
    Cylinder capacity: 1
    Cylinder diameters: Up to 12"
    Cylinder rack dimensions (WxDxH): 18"w x 13.75"d x 72"h

    Cylinder Rack Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • Two 1.5" Polypropylene straps and cinch buckle included
    • Cylinder rack has fully welded construction
    • Quality epoxy powder paint finish for long service life
    • Steel reinforced vinyl edge guards protect cylinder
    • Constructed from 11 gauge and heavier plate steel
    • Elevated panel (14" by 12") allows for mounting of cylinder controls, cross-over devices, etc.
    • A chain set (Model # GB105FS) can be added to this product (optional)
    • Industrial and commercial use
    • Made in the USA
    $445.00
  15. 6 Propane Tanks (33 LB) - Outdoor - Horizontal Storage - Steel - Gas Cylinder Rack
    6 Propane Tanks (33 LB) - Outdoor - Horizontal Storage - Steel - Gas Cylinder Rack
    USA Safety Model#: GR06202SAAM
    Rack capacity: 6 cylinders (33 lb) of 12.5" diameter
    Propane Tank Rack dimensions (WxDxH): 30"w x 27"d x 35"h

    Gas Cylinder Rack Features:
    • Frame and shelf made from galvannealed steel
    • Pre-drilled holes (13/16") for anchoring each foot pad
    • Unit is powder coated with outdoor grade paint for extra durability
    • Ships assembled ready for use
    • Product bolts together and can be disassembled
    • Made in the USA
    $455.00
  16. 2 Cylinders - Truck Transport - Gas Cylinder Stand
    2 Cylinders - Truck Transport - Gas Cylinder Stand
    USA Safety Model#: GR2275FS
    Stand capacity: 1-2 cylinders
    Cylinder diameters: 4"-10"
    Stand dimensions (WxDxH): 28"w x 10.5"d x 36"h

    Gas Cylinder Stand Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • Polypropylene strap and cinch buckle
    • Fully welded construction
    • Quality powder-coat paint finish for long service life
    • Steel reinforced vinyl edge guards protect equipment
    • Cylinder stand constructed from 11 gauge and heavier plate steel
    • Vise-like holding capability of the cylinder locking ring system
    • Locking post can extend from 40" to 66" height
    • Use of safety cylinder caps (Models SC2500FS or DOT standard caps)
    • Ideal system for over-the-road cylinder transportation
    • Includes both high pressure and low pressure plates
    • A chain set (Model # GB105FS) can be added to this product (optional)
    • Industrial and commercial use
    • Ships parcel or larger quantities by freight
    • Made in the USA
    $470.00
  17. 24 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Rack
    24 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Rack
    USA Safety Model#: GRMDE24SSC
    Cylinder capacity: 24
    Supported cylinder sizes: D, E (4.5" diameter)
    Rack dimensions (WxDxH): 34"w x 21.5"d x 21"h

    Medical Tank Rack Features:
    • Holds oxygen and other medical gas tanks
    • 5" square cylinder opening
    • Cylinders are kept off of ground 0.25"
    • All-welded steel construction
    • Pre-drilled 1/2" holes in flat iron base
    • Powder coated green finish
    • Made in the USA
    $475.00
  18. 2 Cylinders - Process Station - Gas Cylinder Rack
    2 Cylinders - Process Station - Gas Cylinder Rack
    USA Safety Model#: PR277FS
    Cylinder capacity: 1-2
    Cylinder diameters: Up to 12"
    Cylinder rack dimensions (WxDxH): 28"w x 12"d x 72"h

    Cylinder Rack Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • 1.5" Polypropylene strap and cinch buckle
    • Cylinder rack has fully welded construction
    • Quality epoxy powder paint finish for long service life
    • Steel reinforced vinyl edge guards protect equipment
    • Constructed from 11 gauge and heavier plate steel
    • Elevated panel (28" by 14") allows for mounting of cylinder controls, cross-over devices, etc.
    • A chain set (Model # GB105FS) can be added to this product (optional)
    • Unit ships partially disassembled for freight savings & ease of use
    • Unit ships LTL Freight
    • Industrial and commercial use
    • Made in the USA
    $480.00
  19. 12 Propane Tanks (33 LB) - Horizontal Storage - Steel - Gas Cylinder Rack
    12 Propane Tanks (33 LB) - Horizontal Storage - Steel - Gas Cylinder Rack
    USA Safety Model#: GR12302MAAM
    Cabinet capacity: 12 cylinders (33 lb) of 12.5" diameter
    Cabinet dimensions (WxDxH): 44"w x 27"d x 50"h

    Gas Cylinder Rack Features:
    • Frame and shelf made from galvannealed steel
    • Pre-drilled holes (13/16") for anchoring each foot pad
    • Powder coated with outdoor grade paint for extra durability
    • Ships assembled ready for use
    • Product bolts together and can be disassembled
    • Made in the USA
    $495.00
  20. 1 Cylinder - Basic - Gas Cylinder Rack
    1 Cylinder - Basic - Gas Cylinder Rack
    USA Safety Model#: GRCR1SC
    Cylinder capacity: 1
    Cylinder diameters supported: Up to 9.5"
    Cylinder rack dimensions (WxDxH): 13"w x 13"d x 36"h

    Cylinder Storage Rack Features:
    • Fully welded 1.5" steel tube
    • Holds one cylinder up to 9.5" in diameter
    • One chain included
    • Pre-drilled 0.5" floor mounting holes on flat iron base
    • Finished with black powder paint
    • Industrial and commercial use
    • Made in the USA
    $525.00
  21. 8 Propane Tanks (33 LB) - Outdoor - Horizontal Storage - Steel - Gas Cylinder Rack
    8 Propane Tanks (33 LB) - Outdoor - Horizontal Storage - Steel - Gas Cylinder Rack
    USA Safety Model#: GR08202MAAM
    Rack capacity: 8 cylinders (33 lb) of 12.5" diameter
    Propane Tank Rack dimensions (WxDxH): 30"w x 27"d x 50"h

    Gas Cylinder Rack Features:
    • Frame and shelf made from galvannealed steel
    • Pre-drilled holes (13/16") for anchoring each foot pad
    • Unit is powder coated with outdoor grade paint for extra durability
    • Ships assembled ready for use
    • Product bolts together and can be disassembled
    • Made in the USA
    $530.00
  22. 1 Cylinder - Stainless Steel - Gas Cylinder Stand
    1 Cylinder - Stainless Steel - Gas Cylinder Stand
    USA Safety Model#: GR175SSFS
    Stand capacity: 1 cylinder
    Cylinder diameters: 4"-12"
    Stand dimensions (WxDxH): 18"w x 13.75"d x 30"h

    Gas Cylinder Stand Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • Polypropylene strap and cinch buckle
    • Cylinder stand has fully welded construction
    • Made from 12 gauge Type 304 Stainless Steel
    • Steel reinforced vinyl edge guards protect equipment
    • A chain set (Model # GB105FS) can be added to this product (optional)
    • Industrial and commercial use
    • Ships parcel
    • Made in the USA
    $535.00
  23. 2 Cylinders - Basic - Gas Cylinder Rack
    2 Cylinders - Basic - Gas Cylinder Rack
    USA Safety Model#: GRCR2SC
    Cylinder capacity: 2
    Cylinder diameters supported: Up to 9.5"
    Cylinder rack dimensions (WxDxH): 13"w x 21.5"d x 36"h

    Cylinder Storage Rack Features:
    • Fully welded 1.5" steel tube
    • Holds two cylinders up to 9.5" in diameter
    • One chain included
    • Pre-drilled 0.5" floor mounting holes on flat iron base
    • Finished with black powder paint
    • Industrial and commercial use
    • Made in the USA
    $540.00
  24. 3 Cylinders - Process Station - Gas Cylinder Rack
    3 Cylinders - Process Station - Gas Cylinder Rack
    USA Safety Model#: PR377FS
    Rack capacity: 1-3 cylinders
    Cylinder diameters: Up to 12"
    Cylinder rack dimensions (WxDxH): 40"w x 12"d x 72"h

    Cylinder Rack Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • 1.5" Polypropylene strap and cinch buckle
    • Cylinder rack has fully welded construction
    • Quality epoxy powder paint finish for long service life
    • Steel reinforced vinyl edge guards protect equipment
    • Constructed from 11 gauge and heavier plate steel
    • Elevated panel (28" by 14") allows for mounting of cylinder controls, cross-over devices, etc.
    • A chain set (Model # GB105FS) can be added to this product (optional)
    • Unit ships partially disassembled for freight savings & ease of use
    • Cylinder stand ships LTL freight
    • Industrial and commercial use
    • Made in the USA
    $545.00
  25. 4 Cylinders - In-Line - Gas Cylinder Stand
    4 Cylinders - In-Line - Gas Cylinder Stand
    USA Safety Model#: GR475FS
    Stand capacity: 1-4 cylinders
    Cylinder diameters: Up to 12"
    Stand dimensions (WxDxH): 52"w x 14"d x 30"h

    Cylinder Stand Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • Polypropylene strap and cinch buckle
    • Fully welded construction
    • Quality powder-coat paint finish for long service life
    • Steel reinforced vinyl edge guards protect equipment
    • Constructed from 11 gauge and heavier plate steel
    • A chain set (Model # GB105FS) can be added to this product (optional)
    • Compressed gas cylinder stand for industrial and commercial use
    • Mounts to the floor, pre-drilled holes accommodates 3/8" anchor bolts
    • Made in the USA
    $550.00
  26. 4 Cylinders - Basic - Gas Cylinder Rack
    4 Cylinders - Basic - Gas Cylinder Rack
    USA Safety Model#: GRCR4SC
    Cylinder capacity: 4
    Cylinder diameters supported: Up to 9.5"
    Cylinder rack dimensions (WxDxH): 23"w x 21.5"d x 36"h

    Cylinder Storage Rack Features:
    • Fully welded 1.5" steel tube
    • Holds up to 4 cylinders up to 9.5" in diameter
    • One chain included
    • Pre-drilled 0.5" floor mounting holes on flat iron base
    • Finished with black powder paint
    • Industrial and commercial use
    • Made in the USA
    $560.00
  27. 6 Cylinders - Basic - Gas Cylinder Rack
    6 Cylinders - Basic - Gas Cylinder Rack
    USA Safety Model#: GRCR6SC
    Cylinder capacity: 6
    Cylinder diameters supported: Up to 9.5"
    Cylinder rack dimensions (WxDxH): 33"w x 21.5"d x 36"h

    Cylinder Storage Rack Features:
    • Fully welded 1.5" steel tube
    • Holds up to 6 cylinders up to 9.5" in diameter
    • One chain included
    • Pre-drilled 05" floor mounting holes on flat iron base
    • Finished with black powder paint
    • Industrial and commercial use
    • Made in the USA
    $590.00
  28. 36 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Rack
    36 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Rack
    USA Safety Model#: GRMDE36SSC
    Cylinder capacity: 36
    Supported cylinder sizes: D, E (4.5" diameter)
    Rack dimensions (WxDxH): 49"w x 21.5"d x 21"h

    Medical Tank Rack Features:
    • Holds oxygen and other medical gas tanks
    • 5" square cylinder opening
    • Cylinders are kept off of ground 0.25"
    • All-welded steel construction
    • Pre-drilled 1/2" holes in flat iron base
    • Powder coated green finish
    • Made in the USA
    $615.00
  29. 8 Cylinders - Basic - Gas Cylinder Rack
    8 Cylinders - Basic - Gas Cylinder Rack
    USA Safety Model#: GRCR8SC
    Cylinder capacity: 8
    Cylinder diameters supported: Up to 9.5"
    Cylinder rack dimensions (WxDxH): 44.5"w x 21.5"d x 36.25"h

    Cylinder Storage Rack Features:
    • Fully welded 1.5" steel tube
    • Holds up to 8 cylinders up to 9.5" in diameter
    • Two chains included
    • Pre-drilled 0.5" floor mounting holes on flat iron base
    • Finished with black powder paint
    • Industrial and commercial use
    • Made in the USA
    $620.00
  30. 6 Cylinders - Gas Cylinder Stand
    6 Cylinders - Gas Cylinder Stand
    USA Safety Model#: GR600FS
    Stand capacity: 1-6 cylinders
    Diameters supported: Up to 12"
    Stand dimensions (WxDxH): 44"w x 23"d x 30"h

    Gas Cylinder Stand Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • 1.5" Polypropylene strap and cinch buckle
    • Fully welded construction
    • Quality powder-coat paint finish for long service life
    • Steel reinforced vinyl edge guards protect equipment
    • Constructed from 11 gauge and heavier plate steel
    • Designed to mount to floor with four fasteners
    • A chain set (Model # GB105FS) can be added to this product (optional)
    • Process control version also available
    • Industrial and commercial use
    • Made in the USA
    $645.00
  31. 16 Propane Tanks (33 LB) - Horizontal Storage - Steel - Gas Cylinder Rack
    16 Propane Tanks (33 LB) - Horizontal Storage - Steel - Gas Cylinder Rack
    USA Safety Model#: GR16402MAAM
    Cabinet capacity: 16 cylinders (33 lb) of 12.5" diameter
    Propane Tank Rack dimensions (WxDxH): 58"w x 27"d x 50"h

    Gas Cylinder Rack Features:
    • Frame and shelf made from galvannealed steel
    • Pre-drilled holes (13/16") for anchoring each foot pad
    • Powder coated with outdoor grade paint for extra durability
    • Ships assembled ready for use
    • Product bolts together and can be disassembled
    • Made in the USA
    $660.00
  32. 1 Cylinder (1x1) - Barricade - Gas Cylinder Rack
    1 Cylinder (1x1) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR1X1FS
    Cylinder capacity: 1
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 16"w x 16"d x 30"h

    Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds one cylinder
    • Two levels of welded steel chains
    • 3 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade Black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Industrial and commercial use
    • Made in the USA
    $690.00
  33. 12 Cylinders - Basic - Gas Cylinder Rack
    12 Cylinders - Basic - Gas Cylinder Rack
    USA Safety Model#: GRCR12SC
    Cylinder capacity: 12
    Cylinder diameters supported: Up to 9.5"
    Cylinder rack dimensions (WxDxH): 64.5"w x 21.5"d x 36"h

    Cylinder Storage Rack Features:
    • Fully welded 1.5" steel tube
    • Holds up to 12 cylinders up to 9.5" in diameter
    • Two chains included
    • Pre-drilled 0.5" floor mounting holes on flat iron base
    • Finished with black powder paint
    • Industrial and commercial use
    • Made in the USA
    $695.00
  34. 1 Cryogenic Tank (22" Dewar) - Liquid Gas Cylinder Rack
    1 Cryogenic Tank (22" Dewar) - Liquid Gas Cylinder Rack
    USA Safety Model#: BR1X1CRYO22
    Cylinder capacity: 1
    Cylinder diameters supported: 18"-22"
    Cylinder rack dimensions (WxDxH): 28"w x 26"d x 40"h

    Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Typically used for cryogenic gases
    • 2 levels of welded and steel chains
    • Snaps to secure cylinder
    • 2" square steel tube continuously seam welded, 0.125" thick surrounds cylinders
    • 4 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Tube sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Industrial and commercial use
    • Made in the USA
    $750.00
  35. 50 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Rack
    50 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Rack
    USA Safety Model#: GRMDE50VSSC
    Cylinder capacity: 50
    Supported cylinder sizes: D, E (4.5" diameter)

    Rack dimensions (WxDxH): 57.5"w x 27.75"d x 21"h

    Oxygen Tank Rack Features:
    • Holds oxygen and other medical gas tanks
    • 5" square cylinder opening
    • Cylinders are kept off of ground 0.25"
    • All welded steel construction
    • Pre-drilled 1/2" holes in flat iron base
    • Welded steel supports
    • Powder coated green finish
    • Made in the USA
    $770.00
  36. 2 Cylinders (1x2) - Barricade - Gas Cylinder Rack
    2 Cylinders (1x2) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR1X2FS
    Cylinder capacity: 1-2
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 16"w x 26"d x 30"h

    Gas Tank Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds two cylinders, one wide by two deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 4 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $785.00
  37. 8 Cylinders - Gas Cylinder Stand
    8 Cylinders - Gas Cylinder Stand
    USA Safety Model#: GR800FS
    Stand capacity: 1-8 cylinders
    Diameters supported: Up to 12"
    Stand dimensions (WxDxH): 56"w x 23"d x 30"h

    Gas Cylinder Stand Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • 1.5" Polypropylene strap and cinch buckle
    • Fully welded construction
    • Quality powder-coat paint finish for long service life
    • Steel reinforced vinyl edge guards protect equipment
    • Constructed from 11 gauge and heavier plate steel
    • Designed to mount to floor with four fasteners
    • A chain set (Model # GB105FS) can be added to this product (optional)
    • Process control version also available
    • Industrial and commercial use
    • Made in the USA
    $800.00
  38. 4 Cylinders - Gas Cylinder Stand
    4 Cylinders - Gas Cylinder Stand
    USA Safety Model#: GR400FS
    Stand capacity: 1-4 cylinders
    Diameters supported: Up to 12"
    Stand dimensions (WxDxH): 32"w x 23"d x 30"h

    Cylinder Stand Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • Cylinder rack has 1.5" Polypropylene strap and cinch buckle
    • Fully welded construction
    • Quality powder-coat paint finish for long service life
    • Steel reinforced vinyl edge guards protect equipment
    • Constructed from 11 gauge and heavier plate steel
    • Designed to mount to floor with four fasteners
    • A chain set (Model # GB105FS) can be added to this product (optional)
    • Dual straps support each cylinder
    • Industrial and commercial use
    • Made in the USA
    $815.00
  39. 6 Tanks - Vertical Storage - Forkliftable - Propane Tank Rack
    6 Tanks - Vertical Storage - Forkliftable - Propane Tank Rack
    USA Safety Model#: TSLP170VT
    Storage Rack Capacity: 6 propane tanks
    Weight capacity: 450 lbs
    Diameter supported: 12-1/2" (33# propane tank)
    Cart dimensions (WxDxH): 38-1/4"w x 39-1/8"d x 29"h

    Propane Tank Rack Features:
    • Holds up to 6 LP tanks (up to 12.5” diameter)
    • Safety chains included for each side of rack
    • All steel construction
    • Coated with water based paint
    • Made in the USA
    $850.00
  40. 3 Cylinders (1x3) - Barricade - Gas Cylinder Rack
    3 Cylinders (1x3) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR1X3FS
    Cylinder capacity: 1-3
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 16"w x 38"d x 30"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds three cylinders, one wide by three deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 4 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $865.00
  41. 2 Cylinders - Stainless Steel - Gas Cylinder Stand
    2 Cylinders - Stainless Steel - Gas Cylinder Stand
    USA Safety Model#: GR275SSFS
    Stand capacity: 1-2 cylinders
    Cylinder diameters: Up to 12"
    Stand dimensions (WxDxH): 28"w x 12"d x 30"h

    Cylinder Stand Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • Polypropylene strap and nylon buckle
    • Gas cylinder stand fully welded
    • Constructed from Type 304 stainless steel
    • Steel reinforced vinyl edge guards protect equipment
    • A chain set (Model # GB105FS) can be added to this product (optional)
    • Industrial and commercial use
    • Mounts to the floor
    • Made in the USA
    • Cylinder stand ships UPS oversized rate or truck
    $880.00
  42. 2 Cylinders - Hoist Hook - Gas Cylinder Rack
    2 Cylinders - Hoist Hook - Gas Cylinder Rack
    USA Safety Model#: GRCR550SC
    Cylinder capacity: 2
    Cylinder diameters supported: Up to 12.5"
    Weight Capacity: 1,000 lbs
    Cylinder rack dimensions (WxDxH): 24"w x 17"d x 62"h

    Cylinder Storage Rack Features:
    • Fully welded 2" square steel tubing
    • Holds up to 2 cylinders up to 12.5" in diameter
    • Hoist hook equipped
    • 2 - 1/4" thick steel perma-clamps
    • 3/16" steel baseplate (24"wx13"d)
    • Finished with black powder paint
    • Industrial and commercial use
    • Made in the USA
    $895.00
  43. 2 Cylinders (2x1) - Barricade - Gas Cylinder Rack
    2 Cylinders (2x1) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR2X1FS
    Cylinder capacity: 1-2
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 30"w x 16"d x 30"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds two cylinders, two wide by one deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 3 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Cylinder rack sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $915.00
  44. 6 Cylinders - Back-to-Back Process Station - Gas Cylinder Stand
    6 Cylinders - Back-to-Back Process Station - Gas Cylinder Stand
    USA Safety Model#: PR600PFS
    Stand capacity: 1-6 cylinders
    Diameters supported: Up to 12"
    Stand dimensions (WxDxH): 52"w x 24"d x 72"h

    Gas Cylinder Stand Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • 1.5" Polypropylene strap and cinch buckle
    • Fully welded construction
    • Quality powder paint finish for long service life
    • Steel reinforced vinyl edge guards protect equipment
    • Constructed from 11 gauge and heavier plate steel
    • Designed to mount to floor with four fasteners
    • A chain set (Model # GB105FS) can be added to this product (optional)
    • Process control version also available
    • Ship UPS oversized rate (partially disassembled for freight savings)
    • Industrial and commercial use
    • Made in the USA
    $915.00
  45. 2 Cylinders (1x2) - Barricade - Process Station - Gas Cylinder Rack
    2 Cylinders (1x2) - Barricade - Process Station - Gas Cylinder Rack
    USA Safety Model#: BR1X2PSFS
    Cylinder capacity: 1-2
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 16"w x 26"d x 72"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds two cylinders, one wide by two deep
    • Two levels of welded steel chains
    • 4 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Gas cylinder rack includes snaps for each cylinder
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $925.00
  46. 1 Propane Tank (20-100lb) - Adjustable Shelf - Gas Cylinder Vise
    1 Propane Tank (20-100lb) - Adjustable Shelf - Gas Cylinder Vise
    USA Safety Model#: GRACVAM
    Stand capacity: 1 cylinder
    Cylinder diameters: 12"-15"
    Stand dimensions (WxDxH): 13"w x 14"d x 36"h

    Gas Cylinder Stand Features:
    • Made from high quality aluminum
    • Mounts to the floor or the wall
    • Adjustable shelf made from aluminum diamond plate
    • 5,000 lb tested nylon ratchet strap included
    • High density, no-maring cushion pads for cylinder to press against
    • Use as a vice when replacing cylinder valves
    • Industrial and commercial use
    • Made in the USA
    $970.00
  47. 2 Cryogenic Tanks (22" Dewar) - Liquid Gas Cylinder Rack
    2 Cryogenic Tanks (22" Dewar) - Liquid Gas Cylinder Rack
    USA Safety Model#: BR2X1CRYO22
    Cylinder capacity: 1-2
    Cylinder diameters supported: 18-22"
    Cylinder rack dimensions (WxDxH): 54"w x 26"d x 40"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Typically used for cryogenic gases in dewar tanks
    • Holds two large cylinders, two wide by one deep
    • 2 levels of welded and steel chains
    • Snaps to secure cylinder
    • 2" square steel tube continuously seam welded, 0.125" thick tube surrounds cylinders
    • 6 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Tube sealed with exterior grade black powder-coat paint
    • Industrial and commercial use
    • Made in the USA
    $980.00
  48. 4 Cylinders (1x4) - Barricade - Gas Cylinder Rack
    4 Cylinders (1x4) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR1X4FS
    Cylinder capacity: 1-4
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 16"w x 50"d x 30"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds four cylinders, one wide by four deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 4 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Gas cylinder rack sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $985.00
  49. 1 Cryogenic Tank (33" Dewar) - Liquid Gas Cylinder Rack
    1 Cryogenic Tank (33" Dewar) - Liquid Gas Cylinder Rack
    USA Safety Model#: BR1X1CRYO33
    Cylinder capacity: 1
    Cylinder diameters supported: 18-33"
    Cylinder rack dimensions (WxDxH): 38"w x 36"d x 40"h

    Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Typically used for cryogenic gases in dewar tanks
    • 2 levels of welded and steel chains
    • Snaps to secure cylinder
    • 4 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • 2" square steel tube continuously seam welded, 0.125" thick surrounds cylinders
    • Tube sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Industrial and commercial use
    • Made in the USA
    $990.00
  50. 4 Cylinders - Back-to-Back Process Station - Gas Cylinder Stand
    4 Cylinders - Back-to-Back Process Station - Gas Cylinder Stand
    USA Safety Model#: PR400PFS
    Stand capacity: 1-4 cylinders
    Diameters supported: Up to 12"
    Stand dimensions (WxDxH): 40"w x 24"d x 72"h

    Cylinder Stand Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • Cylinder rack has 1.5" Polypropylene strap and cinch buckle
    • Fully welded construction
    • Quality powder paint finish for long service life
    • Steel reinforced vinyl edge guards protect equipment
    • Constructed from 11 gauge and heavier plate steel
    • Designed to mount to floor with four fasteners
    • A chain set (Model # GB105FS) can be added to this product (optional)
    • Dual straps support each cylinder
    • Ships partially assembled for UPS shipping capability
    • Industrial and commercial use
    • Made in the USA
    $999.00
  51. 3 Cylinders (1x3) - Barricade - Process Station - Gas Cylinder Rack
    3 Cylinders (1x3) - Barricade - Process Station - Gas Cylinder Rack
    USA Safety Model#: BR1X3PSFS
    Cylinder capacity: 1-3
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 16"w x 38"d x 72"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds three cylinders, one wide by three deep
    • Two levels of welded steel chains
    • 4 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Gas cylinder rack includes snaps for each cylinder
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,075.00
  52. 4 Cylinders - In Line Process Station - Gas Cylinder Rack
    4 Cylinders - In Line Process Station - Gas Cylinder Rack
    USA Safety Model#: PR477FS
    Cylinder capacity: 1-4
    Cylinder diameters: Up to 12"
    Cylinder rack dimensions (WxDxH): 52"w x 14"d x 72"h

    Cylinder Stand Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • Color: Standard stock is medical white; Option for industrial gray
    • 1.5" Polypropylene strap and cinch buckle
    • Cylinder rack has fully welded construction
    • Quality epoxy powder paint finish for long service life
    • Steel reinforced vinyl edge guards protect equipment
    • Constructed from 11 gauge and heavier plate steel
    • Two levels of Unistrut provide regulator and control device mounting stations
    • A chain set (Model # GB105FS) can be added to this product (optional)
    • Unit ships ready to use by truck
    • Industrial and commercial use
    • Made in the USA
    $1,115.00
  53. 4 Cylinders (2x2) - Barricade - Gas Cylinder Rack
    4 Cylinders (2x2) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR2X2FS
    Cylinder capacity: 1-4
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 30"w x 26"d x 30"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds four cylinders, two wide by two deep
    • Two levels of welded steel chains
    • 6 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Gas cylinder rack includes snaps for each cylinder
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,125.00
  54. 2 Cylinders (2x1) - Barricade - Process Station - Gas Cylinder Rack
    2 Cylinders (2x1) - Barricade - Process Station - Gas Cylinder Rack
    USA Safety Model#: BR2X1PSFS
    Cylinder capacity: 1-2
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 30"w x 16"d x 72"h

    Gas Cylinder Storage Rack Features:
    • Cylinder rack meets USGS high seismic hazard zone requirements when installed properly
    • Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded
    • Holds two cylinders, two wide by one deep
    • Two levels of welded steel chains
    • 3 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Gas cylinder rack includes snaps for each cylinder
    • Sealed with exterior grade powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,150.00
  55. 3 Cylinders (3x1) - Barricade - Gas Cylinder Rack
    3 Cylinders (3x1) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR3X1FS
    Cylinder capacity: 1-3
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 44"w x 16"d x 30"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds three cylinders, three wide by two deep
    • Cylinder rack includes two levels of welded steel chains
    • Snaps for each cylinder
    • 4 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,160.00
  56. 6 Cylinders - Hoist Hook - Lifting Eyes - Forkliftable - Cylinder Cradle Rack
    6 Cylinders - Hoist Hook - Lifting Eyes - Forkliftable - Cylinder Cradle Rack
    USA Safety Model#: CCC6FLSC
    Cylinder capacity: 6
    Cylinder diameters supported: Up to 9.5"
    Weight Capacity: 1,950 lbs
    Cylinder rack dimensions (WxDxH): 33"w x 23"d x 77"h

    Cylinder Storage Rack Features:
    • Holds up to 6 cylinders up to 9.5" in diameter
    • Security bars bolt to frame to secure cylinders
    • 4 lifting eyes and center hoist hook
    • Top-mounted two-way forklift pockets
    • Open base for pallet jack or forklift movement
    • 3/16" steel floor plate (28"wx22"d)
    • Finished with 5 stage powder coat, black
    • Industrial and commercial use
    • Outdoor or indoor use
    • Made in the USA
    $1,195.00
  57. 6 Cylinders (2x3) - Barricade - Gas Cylinder Rack
    6 Cylinders (2x3) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR2X3FS
    Cylinder capacity: 1-6
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 30"w x 38"d x 30"h

    Gas Cylinder Storage Rack Features:
    • Store acetylene, argon, butane, carbon dioxide (CO2), helium, hydrogen and nitrogen cylinders
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds six cylinders, two wide by three deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 6 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk gas cylinder storage
    • Made in the USA
    $1,230.00
  58. 4 Cylinders (2x2) - Barricade - Process Station - Gas Cylinder Rack
    4 Cylinders (2x2) - Barricade - Process Station - Gas Cylinder Rack
    USA Safety Model#: BR2X2PSFS
    Cylinder capacity: 1-4
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 30"w x 26"d x 72"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds four cylinders, two wide by two deep
    • Two levels of welded steel chains
    • 6 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Gas cylinder rack includes snaps for each cylinder
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,250.00
  59. 2 Cylinders - Firewall - Hoist Hook - Gas Cylinder Rack
    2 Cylinders - Firewall - Hoist Hook - Gas Cylinder Rack
    USA Safety Model#: GRCR550FWSC
    Cylinder capacity: 2
    Cylinder diameters supported: Up to 12.5"
    Cylinder rack dimensions (WxDxH): 24"w x 27"d x 62"h

    Cylinder Storage Rack Features:
    • Fully welded 2" square steel tubing
    • Holds up to 2 cylinders up to 12.5" in diameter
    • Firewall (1-hour rated) separates the two sides
    • Hoist hook equipped
    • 2 - 1/4" thick steel perma-clamps
    • 3/16" steel baseplate (24"wx13"d)
    • Finished with black paint
    • Industrial and commercial use
    • Made in the USA
    $1,260.00
  60. 3 Cylinders (3x1) - Barricade - Process Station - Gas Cylinder Rack
    3 Cylinders (3x1) - Barricade - Process Station - Gas Cylinder Rack
    USA Safety Model#: BR3X1PSFS
    Cylinder capacity: 1-3
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 44"w x 16"d x 72"h

    Product Features:
    • Cylinder rack meets USGS high seismic hazard zone requirements when installed properly
    • Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded
    • Holds three cylinders, three wide by one deep
    • Two levels of welded steel chains
    • 4 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Gas cylinder rack includes snaps for each cylinder
    • Sealed with exterior grade powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,350.00
  61. 6 Cylinders (2x3) - Barricade - Process Station - Gas Cylinder Rack
    6 Cylinders (2x3) - Barricade - Process Station - Gas Cylinder Rack
    USA Safety Model#: BR2X3PSFS
    Cylinder capacity: 1-6
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 30"w x 38"d x 72"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds six cylinders, two wide by three deep
    • Two levels of welded steel chains
    • 6 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Gas cylinder rack includes snaps for each cylinder
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,350.00
  62. 4 Cylinders (4x1) - Barricade - Gas Cylinder Rack
    4 Cylinders (4x1) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR4X1FS
    Cylinder capacity: 1-4
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 58"w x 16"d x 30"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds four cylinders, four wide by one deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 5 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,410.00
  63. 8 Cylinders (2x4) - Barricade - Gas Cylinder Rack
    8 Cylinders (2x4) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR2X4FS
    Cylinder capacity: 1-8
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 30"w x 50"d x 30"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Two levels of welded steel chains
    • Holds eight cylinders, two wide by four deep
    • Snaps for each cylinder
    • 6 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,420.00
  64. 2 Cryogenic Tanks (33" Dewar) - Liquid Gas Cylinder Rack
    2 Cryogenic Tanks (33" Dewar) - Liquid Gas Cylinder Rack
    USA Safety Model#: BR2X1CRYO33
    Cylinder capacity: 1-2
    Cylinder diameters supported: 18-33"
    Cylinder rack dimensions (WxDxH): 74"w x 36"d x 40"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Typically used for cryogenic gases in dewar tanks
    • Holds two large cylinders, two wide by one deep
    • 2 levels of welded and steel chains
    • Snaps to secure cylinder
    • 2" square steel tube continuously seam welded, 0.125" thick surrounds cylinders
    • 6 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Tube sealed with exterior grade black powder-coat paint
    • Industrial and commercial use
    • Made in the USA
    $1,430.00
  65. 6 Cylinders (3x2) - Barricade - Gas Cylinder Rack
    6 Cylinders (3x2) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR3X2FS
    Cylinder capacity: 1-6
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 44"w x 26"d x 30"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds six cylinders, three wide by two deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 8 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,450.00
  66. 6 Cylinders (3x2) - Barricade - Process Station - Gas Cylinder Rack
    6 Cylinders (3x2) - Barricade - Process Station - Gas Cylinder Rack
    USA Safety Model#: BR3X2PSFS
    Cylinder capacity: 1-6
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 44"w x 25"d x 72"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds six cylinders, three wide by two deep
    • Two levels of welded steel chains
    • 8 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Gas cylinder rack includes snaps for each cylinder
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,500.00
  67. 8 Cylinders (4x2) - Barricade - Gas Cylinder Rack
    8 Cylinders (4x2) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR4X2FS
    Cylinder capacity: 1-8
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 58"w x 26"d x 30"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds eight cylinders, four wide by two deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 10 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,530.00
  68. 12 Cylinders - Hoist Hook & Lifting Eyes - Forkliftable - Cylinder Cradle Rack
    12 Cylinders - Hoist Hook & Lifting Eyes - Forkliftable - Cylinder Cradle Rack
    USA Safety Model#: CCC12FLSC
    Cylinder capacity: 12
    Cylinder diameters supported: Up to 9.5 (200-300 cu ft)
    Weight Capacity: 2,950 lbs
    Cylinder rack dimensions (WxDxH): 33"w x 43"d x 77"h

    Cylinder Storage Rack Features:
    • Holds up to 12 cylinders of up to 9.5" in diameter
    • Security bars bolt to frame to secure cylinders
    • 4 lifting eyes and center hoist hook
    • Top mounted two-way forklift pockets
    • Open base for pallet jack or forklift movement
    • 3/16" steel floor plate
    • Finished with 5 stage powder coat, black
    • Industrial and commercial use
    • Outdoor or indoor use
    • Made in the USA
    $1,545.00
  69. 4 Cylinders (4x1) - Barricade - Process Station - Gas Cylinder Rack
    4 Cylinders (4x1) - Barricade - Process Station - Gas Cylinder Rack
    USA Safety Model#: BR4X1PSFS
    Cylinder capacity: 1-4
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 58"w x 16"d x 72"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds two cylinders, one wide by two deep
    • Two levels of welded steel chains
    • 5 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Gas cylinder rack includes snaps for each cylinder
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,590.00
  70. 9 Cylinders (3x3) - Barricade - Gas Cylinder Rack
    9 Cylinders (3x3) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR3X3FS
    Cylinder capacity: 1-9
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 44"w x 38"d x 30"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds nine cylinders, three wide by three deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 8 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,600.00
  71. 12 Cylinders (3x4) - Barricade - Gas Cylinder Rack
    12 Cylinders (3x4) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR3X4FS
    Cylinder capacity: 1-12
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 44"w x 50"d x 30"h

    Gas Cylinder Storage Rack Features:
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Holds twelve cylinders, three wide by four deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 8 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,700.00
  72. 5 Cylinders (5x1) - Barricade - Gas Cylinder Rack
    5 Cylinders (5x1) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR5X1FS
    Cylinder capacity: 1-5
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 72"w x 16"d x 30"h

    Gas Cylinder Storage Rack Features:
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Holds five cylinders, five wide by one deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 6 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,700.00
  73. 9 Cylinders (3x3) - Barricade - Process Station - Gas Cylinder Rack
    9 Cylinders (3x3) - Barricade - Process Station - Gas Cylinder Rack
    USA Safety Model#: BR3X3PSFS
    Cylinder capacity: 1-9
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 44"w x 38"d x 72"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds nine cylinders, three wide by three deep
    • Two levels of welded steel chains
    • 8 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Gas cylinder rack includes snaps for each cylinder
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,700.00
  74. 6 Cylinders - 16" Hinged Ramp - Gas Bottle Pallet Rack
    6 Cylinders - 16" Hinged Ramp - Gas Bottle Pallet Rack
    USA Safety Model#: GP2106FS
    Pallet capacity: 6
    Cylinder diameters: 6"-10"
    Pallet dimensions (WxDxH): 24"w x 36"d x 37"h

    Gas Tank Pallet Features:
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Fits 6 cylinders up to 10.25" diameter or smaller
    • 16" hinged ramp welded onto pallet (24"Wx16"D)
    • Two-way, fully enclosed forklift channels (3"H X 8"W)
    • Rack is built from 1"x2" steel tube continuously seam welded
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • Pallet welded from 11 gauge steel
    • Quality powder-coat paint finish for long service life & non-skid surface
    • Made in the USA
    $1,820.00
  75. 8 Cylinders (4x2) - Barricade - Process Station - Gas Cylinder Rack
    8 Cylinders (4x2) - Barricade - Process Station - Gas Cylinder Rack
    USA Safety Model#: BR4X2PSFS
    Cylinder capacity: 1-8
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 58"w x 26"d x 72"h

    Gas Cylinder Storage Rack Features:
    • Cylinder rack meets USGS high seismic hazard zone requirements when installed properly
    • Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded
    • Holds eight cylinders, four wide by two deep
    • Two levels of welded steel chains
    • 10 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Gas cylinder rack includes snaps for each cylinder
    • Sealed with exterior grade powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,830.00
  76. 5 Cylinders (5x1) - Barricade - Process Station - Gas Cylinder Rack
    5 Cylinders (5x1) - Barricade - Process Station - Gas Cylinder Rack
    USA Safety Model#: BR5X1PSFS
    Cylinder capacity: 1-5
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 72"w x 16"d x 72"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds five cylinders, five wide by one deep
    • Two levels of welded steel chains
    • 6 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Gas cylinder rack includes snaps for each cylinder
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,910.00
  77. 12 Cylinders (4x3) - Barricade - Gas Cylinder Rack
    12 Cylinders (4x3) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR4X3FS
    Cylinder capacity: 1-12
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 58"w x 38"d x 30"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds twelve cylinders, four wide by three deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 10 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,980.00
  78. 16 Cylinders - Hoist Hook - Forklift Base - Cylinder Cradle Rack
    16 Cylinders - Hoist Hook - Forklift Base - Cylinder Cradle Rack
    USA Safety Model#: CCP16SC
    Cylinder capacity: 16
    Cylinder diameters supported: Up to 9.5 (200-300 cu ft)
    Weight Capacity: 4,500 lbs
    Cylinder rack dimensions (WxDxH): 46"w x 35.5"d x 83"h

    Cylinder Storage Rack Features:
    • Holds up to 16 cylinders of up to 9.5" diameter
    • Security bars bolt to frame to secure cylinders
    • Center hoist eye
    • 4-way forklift base
    • 3/16" steel floor plate
    • Finished with 5 stage powder coat color, black
    • Industrial and commercial use
    • Outdoor or indoor use
    • Made in the USA
    $1,995.00
  79. 10 Cylinders (5x2) - Barricade Gas Cylinder Rack
    10 Cylinders (5x2) - Barricade Gas Cylinder Rack
    USA Safety Model#: BR5X2FS
    Cylinder capacity: 1-10
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 72"w x 26"d x 30"h

    Gas Cylinder Storage Rack Features:
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Holds ten cylinders, five wide by two deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 12 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $2,100.00
  80. 10 Cylinders (5x2) - Barricade - Process Station - Gas Cylinder Rack
    10 Cylinders (5x2) - Barricade - Process Station - Gas Cylinder Rack
    USA Safety Model#: BR5X2PSFS
    Cylinder capacity: 1-10
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 72"w x 26"d x 72"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds ten cylinders, five wide by two deep
    • Two levels of welded steel chains
    • 12 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Gas cylinder rack includes snaps for each cylinder
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $2,200.00
  81. 16 Cylinders (4x4) - Barricade - Gas Cylinder Rack
    16 Cylinders (4x4) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR4X4FS
    Cylinder capacity: 1-16
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 58"w x 50"d x 30"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds sixteen cylinders, four wide by four deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 10 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $2,300.00
  82. 15 Cylinders (5x3) - Barricade Gas Cylinder Rack
    15 Cylinders (5x3) - Barricade Gas Cylinder Rack
    USA Safety Model#: BR5X3FS
    Cylinder capacity: 1-15
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 72"w x 38"d x 30"h

    Gas Cylinder Storage Rack Features:
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Holds fifteen cylinders, five wide by three deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 12 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $2,300.00
  83. 12 Cylinders (4x3) - Barricade - Process Station - Gas Cylinder Rack
    12 Cylinders (4x3) - Barricade - Process Station - Gas Cylinder Rack
    USA Safety Model#: BR4X3PSFS
    Cylinder capacity: 1-12
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 58"w x 38"d x 72"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds twelve cylinders, four wide by three deep
    • Two levels of welded steel chains
    • 10 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Gas cylinder rack includes snaps for each cylinder
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $2,300.00
  84. 12 Cylinders - 16" Hinged Ramp - Gas Bottle Pallet Rack
    12 Cylinders - 16" Hinged Ramp - Gas Bottle Pallet Rack
    USA Safety Model#: GP2112FS
    Pallet capacity: 12
    Cylinder diameters: 6"-11"
    Pallet dimensions (WxDxH): 48"w x 48"d x 33"h

    Gas Tank Pallet Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • Fits 12 cylinders (300 CFT capacity) up to 11" diameter or smaller
    • 16" hinged ramp welded onto pallet (48"Wx16"D)
    • Two-way, fully enclosed forklift channels (3"H X 8"W)
    • Rack is built from 2" square steel tube continuously seam welded
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • Pallet welded from 11 gauge steel
    • Quality powder-coat paint finish for long service life & non-skid surface
    • Made in the USA
    $2,700.00
  85. 20 Cylinders (5x4) - Barricade Gas Cylinder Rack
    20 Cylinders (5x4) - Barricade Gas Cylinder Rack
    USA Safety Model#: BR5X4FS
    Cylinder capacity: 1-20
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 72"w x 50"d x 30"h

    Gas Cylinder Storage Rack Features:
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Holds twenty cylinders, five wide by four deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 12 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $3,100.00

85 Items

per page
Set Descending Direction
Clear All