Skip to Content
The store will not work correctly when cookies are disabled.
JavaScript seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Javascript in your browser.
Home
Cylinder Racks and Stands
Cylinder Racks and Stands
1 Cylinder - Gas Cylinder Stand
USA Safety Model#: GR250RR
Stand capacity: 1 cylinder
Cylinder diameters: 7" - 9.5"
Gas Cylinder Stand dimensions (WxDxH):
17"w
x
18"d x 12"h
Stand Features:
OSHA, NFPA (UFC) & CGA compliant
Adjustable restraint bar holds cylinder 7"-9.5" diameter
Cylinder is slightly elevated from floor
Holds various cylinder sizes, for example: M60, MM, H, T
Can be used for both commercial and industrial purposes
Powder paint finish for durability
Constructed from steel tubing and welded flat bracing
Mounts to the floor (5/16" pre-drilled holes)
6 Cylinders - Oxygen & Medical Gases (D,E,M9) - Cylinder Rack
USA Safety Model#: GR260RR
Cylinder capacity: 6
Supported cylinder sizes: D, E, M9 (4.5" diameter)
Oxygen Tank Rack dimensions (WxDxH):
15"w
x
12"d x 10"h
Medical Oxygen Tank Rack Features:
Holds oxygen and other medical gas tanks
5" square cylinder opening
Cylinders are kept off of ground approximately 1/4 inch
All welded steel construction
ASTM A513 steel supports
Powder coated black finish
Ships parcel
4 Cylinders - Oxygen & Medical (M60) - Cylinder Rack
USA Safety Model#: GR245RR
Cylinder capacity: 4
Supported cylinder sizes: M60 (7.25" diameter)
Oxygen Tank Rack dimensions (WxDxH):
17.75"w
x
15.5"d x 10.25"h
Medical Oxygen Tank Rack Features:
Holds oxygen and other medical gas tanks
7.28" square cylinder opening
Cylinders are kept off of ground approximately 1/4 inch
All welded steel construction
ASTM A513 steel supports
Powder coated black finish
Ships parcel
1 Cylinder - Heavy Duty - Gas Cylinder Stand
USA Safety Model#: GR181FS
Stand capacity: 1 cylinder
Cylinder diameters: 4" - 10"
Stand dimensions (WxDxH):
16"w
x
16"d x 15"h
Gas Cylinder Stand Features:
OSHA, NFPA (UFC) & CGA compliant
Fully welded cylinder stand
Can be used for both commercial and industrial purposes
Seven gauge (.187" thick) steel bar
Powder-coat paint finish for durability
Polypropylene strap and cinch buckle
Equipment protected by steel reinforced vinyl edge guards
Constructed from eleven gauge and heavier plate steel
Mounts to the floor with three 3/8" anchor bolts (not included)
Made in the USA
2 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Rack
USA Safety Model#: GRMDE2SSC
Cylinder capacity: 2
Supported cylinder sizes: D, E (4.5" diameter)
Rack dimensions (WxDxH):
12"w
x
7"d x 21"h
Oxygen Tank Rack Features:
Holds oxygen and other small medical gas tanks
5" square cylinder opening
Cylinders are kept off of ground 0.25"
All-welded steel construction
Powder coated green finish
Made in the USA
2 Cylinders - Poly - Gas Cylinder Stand
USA Safety Model#: GR7212YEEP
Stand capacity: 1-2 cylinders
Diameters supported: 3" to 12-3/8"
Load Capacity: 400 lbs
Stand dimensions (WxDxH):
14"w
x
28"d x 30"h
Gas Cylinder Stand Features:
OSHA 29 CFR.1910 compliant
Made with durable polyethylene
Will not rust, corrode, or spark
2 nylon straps with ladder-slide style clip included
Can be mounted to wall (hardware not included)
Industrial and commercial use
Made in the USA
2 Cylinders - Oxygen & Medical Gases (D,E) - Red - Cylinder Rack
USA Safety Model#: GRMDE2SRSC
Cylinder capacity: 2
Supported cylinder sizes: D, E (4.5" diameter)
Rack dimensions (WxDxH):
12"w
x
7"d x 21"h
Oxygen Tank Rack Features:
Holds oxygen and other small medical gas tanks
5" square cylinder opening
Cylinders are kept off of ground 0.25"
All-welded steel construction
Powder coated Red finish
Made in the USA
12 Cylinders - Oxygen & Medical (D,E,M9) - Cylinder Rack
USA Safety Model#: GR270RR
Cylinder capacity: 12
Supported cylinder sizes: D, E, M9 (4.5" diameter)
Oxygen Tank Rack dimensions (WxDxH):
22"w
x
15"d x 10"h
Medical Oxygen Tank Rack Features:
Holds oxygen and other medical gas tanks
5" square cylinder opening
Cylinders are kept off of ground approximately 1/4 inch
All welded steel construction
ASTM A513 steel supports
Powder coated black finish
Ships parcel
1 Cylinder - 2 Restraints - Gas Cylinder Stand
USA Safety Model#: GR175FS
Stand capacity: 1 cylinder
Cylinder diameters: 4"-12"
Stand dimensions (WxDxH):
19"w
x
13.5"d x 30"h
Gas Cylinder Stand Features:
OSHA, NFPA (UFC) & CGA compliant
Two polypropylene straps with cinch buckle
Cylinder stand has fully welded construction
Made from 11 gauge hot rolled steel
Quality powder-coat paint finish for durability and chemical resistance
Steel reinforced vinyl edge guards protect equipment
Pre-drilled holes for mounting to the floor
A chain set (Model # GB105FS ) can be added to this product (optional)
Industrial and commercial use
Ships parcel or larger quantities ship by freight
Made in the USA
6 Cylinders - Oxygen & Medical Gases (M6) - Green - Cylinder Rack
USA Safety Model#: GRMM66SSC
Cylinder capacity: 6
Supported cylinder sizes: M6 (3.25" diameter)
Rack dimensions (WxDxH):
13.5"w
x
9.5"d x 24"h
Oxygen Tank Rack Features:
Holds oxygen and other medical gas tanks
3.5" square cylinder opening
Cylinders are kept off of ground on elevated shelf
All-welded steel construction
Pre-drilled 1/2" holes in flat iron base
Powder coated green finish
Made in the USA
4 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Rack
USA Safety Model#: GRMDE4SSC
Cylinder capacity: 4
Supported cylinder sizes: D, E (4.5" diameter)
Rack dimensions (WxDxH):
13"w
x
13"d x 21"h
Oxygen Tank Rack Features:
Holds oxygen and other medical gas tanks
5" square cylinder opening
Cylinders are kept off of ground 0.25"
All-welded steel construction
Pre-drilled 1/2" holes in flat iron base
Powder coated green finish
Made in the USA
6 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Rack
USA Safety Model#: GRMDE6SSC
Cylinder capacity: 6
Supported cylinder sizes: D, E (4.5" diameter)
Rack dimensions (WxDxH):
18.5"w
x
12"d x 21"h
Oxygen Tank Rack Features:
Holds oxygen and other medical gas tanks
5" square cylinder opening
Cylinders are kept off of ground 0.25"
All-welded steel construction
Pre-drilled 1/2" holes in flat iron base
Powder coated green finish
Ships parcel
Made in the USA
2 Cylinders - Gas Cylinder Stand
USA Safety Model#: GR275FS
Stand capacity: 1-2 cylinders
Cylinder diameters: Up to 12"
Stand dimensions (WxDxH):
28"w
x
10.5"d x 30"h
Cylinder Stand Features:
OSHA, NFPA (UFC) & CGA compliant
Polypropylene strap and cinch buckle
Gas cylinder stand fully welded
Quality powder-coat paint finish for long service life
Steel reinforced vinyl edge guards protect equipment
Constructed from 11 gauge and heavier plate steel
A chain set (Model # GB105FS ) can be added to this product (optional)
Industrial and commercial use
Mounts to the floor or the wall
Made in the USA
Cylinder stand ships parcel rate or truck
20 Cylinders - Oxygen & Medical Gases (D,E,M9) - Cylinder Rack
USA Safety Model#: GR280RR
Cylinder capacity: 20
Supported cylinder sizes: D, E, M9 (4.5" diameter)
Oxygen Tank Rack dimensions (WxDxH):
27"w
x
20"d x 10"h
Medical Oxygen Tank Rack Features:
Holds oxygen and other medical gas tanks
5" square cylinder opening
Cylinders are kept off of ground approximately 1/4 inch
All welded steel construction
ASTM A513 steel supports
Powder coated black finish
Ships parcel
4 Cylinders - Oxygen & Medical Gases (D,E) - Red - Cylinder Rack
USA Safety Model#: GRMDE4SRSC
Cylinder capacity: 4
Supported cylinder sizes: D, E (4.5" diameter)
Rack dimensions (WxDxH):
13"w
x
13"d x 21"h
Oxygen Tank Rack Features:
Holds oxygen and other medical gas tanks
5" square cylinder opening
Cylinders are kept off of ground 0.25"
All-welded steel construction
Pre-drilled 1/2" holes in flat iron base
Powder coated Red finish
Made in the USA
24 Cylinders - Oxygen & Medical Gases (D,E,M9) - Cylinder Rack
USA Safety Model#: GR290RR
Cylinder capacity: 24
Supported cylinder sizes: D, E, M9 (4.5" diameter)
Oxygen Tank Rack dimensions (WxDxH):
32"w
x
20"d x 10"h
Medical Oxygen Tank Rack Features:
Holds oxygen and other medical gas tanks
5" square cylinder opening
Cylinders are kept off of ground approximately 1/4 inch
All welded steel construction
ASTM A513 steel supports
Powder coated black finish
Ships parcel
6 Cylinders - Oxygen & Medical Gases (D,E) - Red - Cylinder Rack
USA Safety Model#: GRMDE6SRSC
Cylinder capacity: 6
Supported cylinder sizes: D, E (4.5" diameter)
Rack dimensions (WxDxH):
18.5"w
x
12"d x 21"h
Oxygen Tank Rack Features:
Holds oxygen and other medical gas tanks
5" square cylinder opening
Cylinders are kept off of ground 0.25"
All-welded steel construction
Pre-drilled 1/2" holes in flat iron base
Powder coated Red finish
Ships parcel
Made in the USA
28 Cylinders - Oxygen & Medical Gases (D,E,M9) - Medical Cylinder Rack
USA Safety Model#: GR300RR
Cylinder capacity: 28
Supported cylinder sizes: D, E, M9 (4.5" diameter)
Oxygen Tank Rack dimensions (WxDxH):
37"w
x
20"d x 10"h
Medical Oxygen Tank Rack Features:
Holds oxygen and other medical gas tanks
5" square cylinder opening
Cylinders are kept off of ground approximately 1/4 inch
All welded steel construction
ASTM A513 steel supports
Powder coated black finish
Ships parcel
12 Cylinders - Oxygen & Medical Gases (M6) - Green - Cylinder Rack
USA Safety Model#: GRMM612SSC
Cylinder capacity: 12
Supported cylinder sizes: M6 (3.25" diameter)
Rack dimensions (WxDxH):
19.5"w
x
13.5"d x 20.75"h
Oxygen Tank Rack Features:
Holds oxygen and other medical gas tanks
3.5" square cylinder opening
Cylinders are kept off of ground on elevated shelf
All-welded steel construction
Pre-drilled 1/2" holes in flat iron base
Powder coated green finish
Made in the USA
3 Cylinders - Gas Cylinder Stand
USA Safety Model#: GR375FS
Stand capacity: 1-3 cylinders
Cylinder diameters: Up to 12"
Stand dimensions (WxDxH):
40"w
x
10.5"d x 30"h
Gas Cylinder Stand Features:
OSHA, NFPA (UFC) & CGA compliant
Industrial and commercial use cylinder stand
1.5" Polypropylene strap and cinch buckle
Store acetylene, argon, butane, carbon dioxide (CO2), helium, hydrogen and nitrogen cylinders
Cylinder stand made of fully welded construction
Quality powder paint finish for long service life
Steel reinforced vinyl edge guards protect equipment
Constructed from 11 gauge and heavier plate steel
A chain set (Model # GB105FS ) can be added to this product (optional)
Process control version also available
Mounts to the floor or the wall
Made in the USA
Cylinder stand ships parcel oversized rate or freight
24 Cylinders - Universal Oxygen & Medical Gases (D,E,M9,M7,ML6) - Cylinder Rack
USA Safety Model#: GR292RR
Cylinder capacity: 24
Supported cylinder sizes: D, E, M9, M7, ML6 (4.5" diameter)
Oxygen Tank Rack dimensions (WxDxH):
32"w
x
20"d x 10"h
Medical Oxygen Tank Rack Features:
Holds oxygen and other medical gas tanks
5" square cylinder opening
Cylinders are kept off of ground approximately 1/4 inch
All welded steel construction
ASTM A513 steel supports
Powder coated black finish
Ships parcel
12 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Rack
USA Safety Model#: GRMDE12SSC
Cylinder capacity: 12
Supported cylinder sizes: D, E (4.5" diameter)
Rack dimensions (WxDxH):
23.5"w
x
17"d x 21"h
Oxygen Tank Rack Features:
Holds oxygen and other medical gas tanks
5" square cylinder opening
Cylinders are kept off of ground 0.25"
All-welded steel construction
Pre-drilled 1/2" holes in flat iron base
Powder coated green finish
Made in the USA
1 Cylinder - Truck Transport - Gas Cylinder Stand
USA Safety Model#: GR2175FS
Stand capacity: 1 cylinder
Cylinder diameters: 4"-10"
Stand dimensions (WxDxH):
16.75"w
x
10.5"d x 36"h
Gas Cylinder Stand Features:
OSHA, NFPA (UFC) & CGA compliant
Polypropylene strap and cinch buckle
Cylinder stand has fully welded construction
Quality powder-coat paint finish for long service life
Steel reinforced vinyl edge guards protect equipment
Constructed from 11 gauge and heavier plate steel
Chain sets can be added for secondary support
Vise-like holding capability with post and locking ring system
Locking post can extend 40" to 66" height
Use with cylinder cap (e.g. Model SC2501FS or DOT standard caps), not included
Ideal system for over-the-road cylinder transportation
Includes both high pressure and low pressure plates
A chain set (Model # GB105FS ) can be added to this product (optional)
Industrial and commercial use
Ships by parcel or larger quantities by freight
Made in the USA
12 Cylinders - Oxygen & Medical Gases (D,E) - Red - Cylinder Rack
USA Safety Model#: GRMDE12SRSC
Cylinder capacity: 12
Supported cylinder sizes: D, E (4.5" diameter)
Rack dimensions (WxDxH):
23.5"w
x
17"d x 21"h
Oxygen Tank Rack Features:
Holds oxygen and other medical gas tanks
5" square cylinder opening
Cylinders are kept off of ground 0.25"
All-welded steel construction
Pre-drilled 1/2" holes in flat iron base
Powder coated red finish
Made in the USA
1 Cylinder - Process Station - Gas Cylinder Rack
USA Safety Model#: PR177FS
Cylinder capacity: 1
Cylinder diameters: Up to 12"
Cylinder rack dimensions (WxDxH):
18"w
x
13.75"d x 72"h
Cylinder Rack Features:
OSHA, NFPA (UFC) & CGA compliant
Two 1.5" Polypropylene straps and cinch buckle included
Cylinder rack has fully welded construction
Quality epoxy powder paint finish for long service life
Steel reinforced vinyl edge guards protect cylinder
Constructed from 11 gauge and heavier plate steel
Elevated panel (14" by 12") allows for mounting of cylinder controls, cross-over devices, etc.
A chain set (Model # GB105FS ) can be added to this product (optional)
Industrial and commercial use
Made in the USA
4 Cylinders - Poly - Gas Cylinder Stand
USA Safety Model#: GR7213YEEP
Stand capacity: 1-4 cylinders
Diameters supported: 3" to 11-3/8"
Load Capacity: 800 lbs
Stand dimensions (WxDxH):
29"w
x
41"d x 46.5"h
Gas Cylinder Stand Features:
OSHA 29 CFR.1910 compliant
Made with durable polyethylene
Will not rust, corrode, or spark
4 nylon straps with ladder slide style clip included
Add Lower Straps (optional) - Model # AC7205BKEP
Industrial and commercial use
Made in the USA
2 Cylinders - Truck Transport - Gas Cylinder Stand
USA Safety Model#: GR2275FS
Stand capacity: 1-2 cylinders
Cylinder diameters: 4"-10"
Stand dimensions (WxDxH):
28"w
x
10.5"d x 36"h
Gas Cylinder Stand Features:
OSHA, NFPA (UFC) & CGA compliant
Polypropylene strap and cinch buckle
Fully welded construction
Quality powder-coat paint finish for long service life
Steel reinforced vinyl edge guards protect equipment
Cylinder stand constructed from 11 gauge and heavier plate steel
Vise-like holding capability of the cylinder locking ring system
Locking post can extend from 40" to 66" height
Use with cylinder caps (Models SC2501FS or DOT standard caps), not included
Ideal system for over-the-road cylinder transportation
Includes both high pressure and low pressure plates
A chain set (Model # GB105FS ) can be added to this product (optional)
Industrial and commercial use
Ships parcel or larger quantities by freight
Made in the USA
2 Cylinders - Process Station - Gas Cylinder Rack
USA Safety Model#: PR277FS
Cylinder capacity: 1-2
Cylinder diameters: Up to 12"
Cylinder rack dimensions (WxDxH):
28"w
x
12"d x 72"h
Cylinder Rack Features:
OSHA, NFPA (UFC) & CGA compliant
1.5" Polypropylene strap and cinch buckle
Cylinder rack has fully welded construction
Quality epoxy powder paint finish for long service life
Steel reinforced vinyl edge guards protect equipment
Constructed from 11 gauge and heavier plate steel
Elevated panel (28" by 14") allows for mounting of cylinder controls, cross-over devices, etc.
A chain set (Model # GB105FS ) can be added to this product (optional)
Unit ships partially disassembled for freight savings & ease of use
Unit ships LTL Freight
Industrial and commercial use
Made in the USA
4 Propane Tanks (33 LB) - Outdoor - Horizontal Storage - Steel - Gas Cylinder Rack
USA Safety Model#: GR04202SAAM
Rack capacity: 4 cylinders (33 lb) of 12.5" diameter
Propane Tank Rack dimensions (WxDxH):
30"w
x
27"d x 35"h
Gas Cylinder Rack Features:
Frame and shelf made from galvannealed steel
Pre-drilled holes (13/16") for anchoring each foot pad
Unit is powder coated with outdoor grade paint for extra durability
Ships assembled ready for use
Product bolts together and can be disassembled
Made in the USA
24 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Rack
USA Safety Model#: GRMDE24SSC
Cylinder capacity: 24
Supported cylinder sizes: D, E (4.5" diameter)
Rack dimensions (WxDxH):
34"w
x
21.5"d x 21"h
Medical Tank Rack Features:
Holds oxygen and other medical gas tanks
5" square cylinder opening
Cylinders are kept off of ground 0.25"
All-welded steel construction
Pre-drilled 1/2" holes in flat iron base
Powder coated green finish
Made in the USA
1 Cylinder - Stainless Steel - Gas Cylinder Stand
USA Safety Model#: GR175SSFS
Stand capacity: 1 cylinder
Cylinder diameters: 4"-12"
Stand dimensions (WxDxH):
18"w
x
13.75"d x 30"h
Gas Cylinder Stand Features:
OSHA, NFPA (UFC) & CGA compliant
Polypropylene strap and cinch buckle
Cylinder stand has fully welded construction
Made from 12 gauge Type 304 Stainless Steel
Steel reinforced vinyl edge guards protect equipment
A chain set (Model # GB105FS ) can be added to this product (optional)
Industrial and commercial use
Ships parcel
Made in the USA
6 Cylinders - Poly - Gas Cylinder Stand
USA Safety Model#: GR7202YEEP
Stand capacity: 1-6 cylinders
Diameters supported: 3-10"
Load Capacity: 1,200 lbs
Stand dimensions (WxDxH):
31"w
x
47.5"d x 41"h
Gas Cylinder Stand Features:
OSHA 29 CFR.1910 compliant
Made with polyethylene
Will not rust, corrode, or spark
6 nylon straps with ladder slide style clip included
Forkliftable (only when not loaded)
Add Lower Straps (optional) - Model # AC7205BKEP
Add Ramp (optional) - Model # AC7203BKEP
Add Wheeled Caster Frame (optional) - Model # AC7204BKEP
Industrial and commercial use
Made in the USA
3 Cylinders - Process Station - Gas Cylinder Rack
USA Safety Model#: PR377FS
Rack capacity: 1-3 cylinders
Cylinder diameters: Up to 12"
Cylinder rack dimensions (WxDxH):
40"w
x
12"d x 72"h
Cylinder Rack Features:
OSHA, NFPA (UFC) & CGA compliant
1.5" Polypropylene strap and cinch buckle
Cylinder rack has fully welded construction
Quality epoxy powder paint finish for long service life
Steel reinforced vinyl edge guards protect equipment
Constructed from 11 gauge and heavier plate steel
Elevated panel (38.75" by 14") allows for mounting of cylinder controls, cross-over devices, etc.
A chain set (Model # GB105FS ) can be added to this product (optional)
Unit ships partially disassembled for freight savings & ease of use
Cylinder stand ships LTL freight
Industrial and commercial use
Made in the USA
4 Cylinders - In-Line - Gas Cylinder Stand
USA Safety Model#: GR475FS
Stand capacity: 1-4 cylinders
Cylinder diameters: Up to 12"
Stand dimensions (WxDxH):
52"w
x
14"d x 30"h
Cylinder Stand Features:
OSHA, NFPA (UFC) & CGA compliant
Polypropylene strap and cinch buckle
Fully welded construction
Quality powder-coat paint finish for long service life
Steel reinforced vinyl edge guards protect equipment
Constructed from 11 gauge and heavier plate steel
A chain set (Model # GB105FS ) can be added to this product (optional)
Compressed gas cylinder stand for industrial and commercial use
Mounts to the floor, pre-drilled holes accommodates 3/8" anchor bolts
Made in the USA
1 Cylinder - Basic - Gas Cylinder Rack
USA Safety Model#: GRCR1SC
Cylinder capacity: 1
Cylinder diameters supported: Up to 9.5"
Cylinder rack dimensions (WxDxH):
13"w
x
13"d x 36"h
Cylinder Storage Rack Features:
Fully welded 1.5" steel tube
Holds one cylinder up to 9.5" in diameter
One zinc plated 3/16" chain included
Pre-drilled 0.5" floor mounting holes on flat iron base
Finished with black powder paint
Industrial and commercial use
Made in the USA
2 Cylinders - Basic - Gas Cylinder Rack
USA Safety Model#: GRCR2SC
Cylinder capacity: 2
Cylinder diameters supported: Up to 9.5"
Cylinder rack dimensions (WxDxH):
13"w
x
21.5"d x 36"h
Cylinder Storage Rack Features:
Fully welded 1.5" steel tube
Holds two cylinders up to 9.5" in diameter
One zinc plated 3/16" steel chain included
Pre-drilled 0.5" floor mounting holes on flat iron base
Finished with black powder paint
Industrial and commercial use
Made in the USA
4 Cylinders - Basic - Gas Cylinder Rack
USA Safety Model#: GRCR4SC
Cylinder capacity: 4
Cylinder diameters supported: Up to 9.5"
Cylinder rack dimensions (WxDxH):
23"w
x
21.5"d x 36"h
Cylinder Storage Rack Features:
Fully welded 1.5" steel tube
Holds up to 4 cylinders up to 9.5" in diameter
One zinc plated 3/16" steel chain included
Pre-drilled 0.5" floor mounting holes on flat iron base
Finished with black powder paint
Industrial and commercial use
Made in the USA
12 Propane Tanks (33 LB) - Horizontal Storage - Steel - Gas Cylinder Rack
USA Safety Model#: GR12302MAAM
Cabinet capacity: 12 cylinders (33 lb) of 12.5" diameter
Cabinet dimensions (WxDxH):
44"w
x
27"d x 50"h
Gas Cylinder Rack Features:
Frame and shelf made from galvannealed steel
Pre-drilled holes (13/16") for anchoring each foot pad
Powder coated with outdoor grade paint for extra durability
Ships assembled ready for use
Product bolts together and can be disassembled
Made in the USA
4 Cylinders - Gas Cylinder Stand
USA Safety Model#: GR400FS
Stand capacity: 1-4 cylinders
Diameters supported: Up to 12"
Stand dimensions (WxDxH):
32"w
x
23"d x 30"h
Cylinder Stand Features:
OSHA, NFPA (UFC) & CGA compliant
Cylinder rack has 1.5" Polypropylene strap and cinch buckle
Fully welded construction
Quality powder-coat paint finish for long service life
Steel reinforced vinyl edge guards protect equipment
Constructed from 11 gauge and heavier plate steel
Designed to mount to floor with four fasteners
A chain set (Model # GB105FS ) can be added to this product (optional)
Dual straps support each cylinder
Industrial and commercial use
Made in the USA
8 Propane Tanks (33 LB) - Outdoor - Horizontal Storage - Steel - Gas Cylinder Rack
USA Safety Model#: GR08202MAAM
Rack capacity: 8 cylinders (33 lb) of 12.5" diameter
Propane Tank Rack dimensions (WxDxH):
30"w
x
27"d x 50"h
Gas Cylinder Rack Features:
Frame and shelf made from galvannealed steel
Pre-drilled holes (13/16") for anchoring each foot pad
Unit is powder coated with outdoor grade paint for extra durability
Ships assembled ready for use
Product bolts together and can be disassembled
Made in the USA
36 Cylinders - Oxygen & Medical Gases (M6) - Green - Cylinder Rack
USA Safety Model#: GRMM636SSC
Cylinder capacity: 36
Supported cylinder sizes: M6 (3.25" diameter)
Rack dimensions (WxDxH):
42.5"w
x
17.5"d x 35"h
Oxygen Tank Rack Features:
Holds oxygen and other medical gas tanks
3.5" square cylinder opening
Cylinders are kept off of ground on elevated shelf
All-welded steel construction
Pre-drilled 1/2" holes in flat iron base
Powder coated green finish
Made in the USA
6 Cylinders - Basic - Gas Cylinder Rack
USA Safety Model#: GRCR6SC
Cylinder capacity: 6
Cylinder diameters supported: Up to 9.5"
Cylinder rack dimensions (WxDxH):
33"w
x
21.5"d x 36"h
Cylinder Storage Rack Features:
Fully welded 1.5" steel tube
Holds up to 6 cylinders up to 9.5" in diameter
One zinc plated 3/16" steel chain included
Pre-drilled 05" floor mounting holes on flat iron base
Finished with black powder paint
Industrial and commercial use
Made in the USA
1 Cylinder (1x1) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR1X1FS
Cylinder capacity: 1
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
16"w
x
16"d x 30"h
Cylinder Storage Rack Features:
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
2" square steel tube continuously seam welded, 0.125" thick
Two levels of welded steel chains (19" long each)
3 Pre-drilled 0.531" (14-mm) diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Industrial and commercial use
Made in the USA
6 Cylinders - Gas Cylinder Stand
USA Safety Model#: GR600FS
Stand capacity: 1-6 cylinders
Diameters supported: Up to 12"
Stand dimensions (WxDxH):
44"w
x
23"d x 30"h
Gas Cylinder Stand Features:
OSHA, NFPA (UFC) & CGA compliant
1.5" Polypropylene strap and cinch buckle
Fully welded construction
Quality powder-coat paint finish for long service life
Steel reinforced vinyl edge guards protect equipment
Constructed from 11 gauge and heavier plate steel
Designed to mount to floor with four fasteners
A chain set (Model # GB105FS ) can be added to this product (optional)
Process control version also available
Industrial and commercial use
Made in the USA
36 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Rack
USA Safety Model#: GRMDE36SSC
Cylinder capacity: 36
Supported cylinder sizes: D, E (4.5" diameter)
Rack dimensions (WxDxH):
49"w
x
21.5"d x 21"h
Medical Tank Rack Features:
Holds oxygen and other medical gas tanks
5" square cylinder opening
Cylinders are kept off of ground 0.25"
All-welded steel construction
Pre-drilled 1/2" holes in flat iron base
Powder coated green finish
Made in the USA
8 Cylinders - Basic - Gas Cylinder Rack
USA Safety Model#: GRCR8SC
Cylinder capacity: 8
Cylinder diameters supported: Up to 9.5"
Cylinder rack dimensions (WxDxH):
44.5"w
x
21.5"d x 36.25"h
Cylinder Storage Rack Features:
Fully welded 1.5" steel tube
Holds up to 8 cylinders up to 9.5" in diameter
Two zinc plated 3/16" steel chains included
Pre-drilled 0.5" floor mounting holes on flat iron base
Finished with black powder paint
Industrial and commercial use
Made in the USA
2 Cylinders (1x2) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR1X2FS
Cylinder capacity: 1-2
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
16"w
x
26"d x 30"h
Gas Tank Storage Rack Features:
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
2" square steel tube continuously seam welded, 0.125" thick
Holds two cylinders, one wide by two deep
Two levels of welded steel chains (19" long each)
Snaps for each cylinder
4 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
12 Cylinders - Basic - Gas Cylinder Rack
USA Safety Model#: GRCR12SC
Cylinder capacity: 12
Cylinder diameters supported: Up to 9.5"
Cylinder rack dimensions (WxDxH):
64.5"w
x
21.5"d x 36"h
Cylinder Storage Rack Features:
Fully welded 1.5" steel tube
Holds up to 12 cylinders up to 9.5" in diameter
Two zinc plated 3/16" steel chains included
Pre-drilled 0.5" floor mounting holes on flat iron base
Finished with black powder paint
Industrial and commercial use
Made in the USA
16 Propane Tanks (33 LB) - Horizontal Storage - Steel - Gas Cylinder Rack
USA Safety Model#: GR16402MAAM
Cabinet capacity: 16 cylinders (33 lb) of 12.5" diameter
Propane Tank Rack dimensions (WxDxH):
58"w
x
27"d x 50"h
Gas Cylinder Rack Features:
Frame and shelf made from galvannealed steel
Pre-drilled holes (13/16") for anchoring each foot pad
Powder coated with outdoor grade paint for extra durability
Ships assembled ready for use
Product bolts together and can be disassembled
Made in the USA
8 Cylinders - Gas Cylinder Stand
USA Safety Model#: GR800FS
Stand capacity: 1-8 cylinders
Diameters supported: Up to 12"
Stand dimensions (WxDxH):
56"w
x
23"d x 30"h
Gas Cylinder Stand Features:
OSHA, NFPA (UFC) & CGA compliant
1.5" Polypropylene strap and cinch buckle
Fully welded construction
Quality powder-coat paint finish for long service life
Steel reinforced vinyl edge guards protect equipment
Constructed from 11 gauge and heavier plate steel
Designed to mount to floor with four fasteners
A chain set (Model # GB105FS ) can be added to this product (optional)
Process control version also available
Industrial and commercial use
Made in the USA
50 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Rack
USA Safety Model#: GRMDE50VSSC
Cylinder capacity: 50
Supported cylinder sizes: D, E (4.5" diameter)
Rack dimensions (WxDxH):
57.5"w
x
27.75"d x 21"h
Oxygen Tank Rack Features:
Holds oxygen and other medical gas tanks
5" square cylinder opening
Cylinders are kept off of ground 0.25"
All welded steel construction
Pre-drilled 1/2" holes in flat iron base
Welded steel supports
Powder coated green finish
Made in the USA
3 Cylinders (1x3) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR1X3FS
Cylinder capacity: 1-3
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
16"w
x
38"d x 30"h
Gas Cylinder Storage Rack Features:
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
2" square steel tube continuously seam welded, 0.125" thick
Holds three cylinders, one wide by three deep
Two levels of welded steel chains (19" long each)
Snaps for each cylinder
4 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
2 Cylinders (2x1) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR2X1FS
Cylinder capacity: 1-2
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
30"w
x
16"d x 30"h
Gas Cylinder Storage Rack Features:
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
2" square steel tube continuously seam welded, 0.125" thick
Holds two cylinders, two wide by one deep
Two levels of welded steel chains (19" long each)
Snaps for each cylinder
3 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Cylinder rack sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
1 Cryogenic Tank (22" Dewar) - Liquid Gas Cylinder Rack
USA Safety Model#: BR1X1CRYO22
Cylinder capacity: 1
Cylinder diameters supported: 18"-22"
Cylinder rack dimensions (WxDxH):
28"w
x
26"d x 40"h
Cylinder Storage Rack Features:
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
Typically used for cryogenic gases
2 levels of welded and steel chains
Snaps to secure cylinder
2" square steel tube continuously seam welded, 0.125" thick surrounds cylinders
4 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Tube sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Industrial and commercial use
Made in the USA
2 Cylinders - Stainless Steel - Gas Cylinder Stand
USA Safety Model#: GR275SSFS
Stand capacity: 1-2 cylinders
Cylinder diameters: Up to 12"
Stand dimensions (WxDxH):
28"w
x
12"d x 30"h
Cylinder Stand Features:
OSHA, NFPA (UFC) & CGA compliant
Polypropylene strap and nylon buckle
Gas cylinder stand fully welded
Constructed from Type 304 stainless steel
Steel reinforced vinyl edge guards protect equipment
A chain set (Model # GB105FS ) can be added to this product (optional)
Industrial and commercial use
Mounts to the floor
Made in the USA
Cylinder stand ships UPS oversized rate or truck
6 Cylinders - Back-to-Back Process Station - Gas Cylinder Stand
USA Safety Model#: PR600PFS
Stand capacity: 1-6 cylinders
Diameters supported: Up to 12"
Stand dimensions (WxDxH):
52"w
x
24"d x 72"h
Gas Cylinder Stand Features:
OSHA, NFPA (UFC) & CGA compliant
1.5" Polypropylene strap and cinch buckle
Fully welded construction
Quality powder paint finish for long service life
Steel reinforced vinyl edge guards protect equipment
Constructed from 11 gauge and heavier plate steel
Designed to mount to floor with four fasteners
A chain set (Model # GB105FS ) can be added to this product (optional)
Industrial and commercial use
Made in the USA
4 Cylinders (1x4) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR1X4FS
Cylinder capacity: 1-4
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
16"w
x
50"d x 30"h
Gas Cylinder Storage Rack Features:
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
2" square steel tube continuously seam welded, 0.125" thick
Holds four cylinders, one wide by four deep
Two levels of welded steel chains (19" long each)
Snaps for each cylinder
4 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Gas cylinder rack sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
6 Tanks - Vertical Storage - Forkliftable - Propane Tank Rack
USA Safety Model#: TSLP170VT
Storage Rack Capacity: 6 propane tanks
Weight capacity: 450 lbs
Diameter supported: 12-1/2" (33# propane tank)
Cart dimensions (WxDxH):
38-1/4"w
x
39-1/8"d x 29"h
Propane Tank Rack Features:
Holds up to 6 LP tanks (up to 12.5” diameter)
Safety chains included for each side of rack
All steel construction
Coated with water based paint
Made in the USA
2 Cylinders - Hoist Hook - Gas Cylinder Rack
USA Safety Model#: GRCR550SC
Cylinder capacity: 2
Cylinder diameters supported: Up to 12.5"
Weight Capacity: 1,000 lbs
Cylinder rack dimensions (WxDxH):
27.5"w
x
13.5"d x 62"h
Cylinder Storage Rack Features:
Fully welded 1.5" square steel tubing
Holds up to 2 cylinders up to 12.5" in diameter
Hoist hook equipped
2 - 1/4" thick steel perma-clamps
3/16" steel baseplate (24"wx13"d)
Finished with black powder paint
Industrial and commercial use
Made in the USA
6 Propane Tanks (33 LB) - Outdoor - Horizontal Storage - Steel - Gas Cylinder Rack
USA Safety Model#: GR06202SAAM
Rack capacity: 6 cylinders (33 lb) of 12.5" diameter
Propane Tank Rack dimensions (WxDxH):
30"w
x
27"d x 35"h
Gas Cylinder Rack Features:
Frame and shelf made from galvannealed steel
Pre-drilled holes (13/16") for anchoring each foot pad
Unit is powder coated with outdoor grade paint for extra durability
Ships assembled ready for use
Product bolts together and can be disassembled
Made in the USA
4 Cylinders - Back-to-Back Process Station - Gas Cylinder Stand
USA Safety Model#: PR400PFS
Stand capacity: 1-4 cylinders
Diameters supported: Up to 12"
Stand dimensions (WxDxH):
40"w
x
24"d x 72"h
Cylinder Stand Features:
OSHA, NFPA (UFC) & CGA compliant
Cylinder rack has 1.5" Polypropylene strap and cinch buckle
Fully welded construction
Quality powder paint finish for long service life
Steel reinforced vinyl edge guards protect equipment
Constructed from 11 gauge and heavier plate steel
Designed to mount to floor with four fasteners
A chain set (Model # GB105FS ) can be added to this product (optional)
Dual straps support each cylinder
Ships partially assembled for UPS shipping capability
Industrial and commercial use
Made in the USA
2 Cylinders (1x2) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR1X2PSFS
Cylinder capacity: 1-2
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
16"w
x
26"d x 72"h
Gas Cylinder Storage Rack Features:
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
2" square steel tube continuously seam welded, 0.125" thick
Holds two cylinders, one wide by two deep
Two levels of welded steel chains (19" long each)
4 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Gas cylinder rack includes snaps for each cylinder
Sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
4 Cylinders (2x2) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR2X2FS
Cylinder capacity: 1-4
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
30"w
x
26"d x 30"h
Gas Cylinder Storage Rack Features:
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
2" square steel tube continuously seam welded, 0.125" thick
Holds four cylinders, two wide by two deep
Two levels of welded steel chains (19" long each)
6 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Gas cylinder rack includes snaps for each cylinder
Sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
4 Cylinders - In Line Process Station - Gas Cylinder Rack
USA Safety Model#: PR477FS
Cylinder capacity: 1-4
Cylinder diameters: Up to 12"
Cylinder rack dimensions (WxDxH):
52"w
x
14"d x 72"h
Cylinder Stand Features:
OSHA, NFPA (UFC) & CGA compliant
Color: Standard stock is medical white; Option for industrial gray
1.5" Polypropylene strap and cinch buckle
Cylinder rack has fully welded construction
Quality epoxy powder paint finish for long service life
Steel reinforced vinyl edge guards protect equipment
Constructed from 11 gauge and heavier plate steel
Two levels of Unistrut provide regulator and control device mounting stations
A chain set (Model # GB105FS ) can be added to this product (optional)
Unit ships ready to use by truck
Industrial and commercial use
Made in the USA
3 Cylinders (3x1) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR3X1FS
Cylinder capacity: 1-3
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
44"w
x
16"d x 30"h
Gas Cylinder Storage Rack Features:
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
2" square steel tube continuously seam welded, 0.125" thick
Holds three cylinders, three wide by two deep
Two levels of welded steel chains (19" long each)
Snaps for each cylinder
4 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
1 Cryogenic Tank (33" Dewar) - Liquid Gas Cylinder Rack
USA Safety Model#: BR1X1CRYO33
Cylinder capacity: 1
Cylinder diameters supported: 18-33"
Cylinder rack dimensions (WxDxH):
38"w
x
36"d x 40"h
Cylinder Storage Rack Features:
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
Typically used for cryogenic gases in dewar tanks
2 levels of welded and steel chains
Snaps to secure cylinder
4 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
2" square steel tube continuously seam welded, 0.125" thick surrounds cylinders
Tube sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Industrial and commercial use
Made in the USA
2 Cryogenic Tanks (22" Dewar) - Liquid Gas Cylinder Rack
USA Safety Model#: BR2X1CRYO22
Cylinder capacity: 1-2
Cylinder diameters supported: 18-22"
Cylinder rack dimensions (WxDxH):
54"w
x
26"d x 40"h
Gas Cylinder Storage Rack Features:
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
Typically used for cryogenic gases in dewar tanks
Holds two large cylinders, two wide by one deep
2 levels of welded and steel chains
Snaps to secure cylinder
2" square steel tube continuously seam welded, 0.125" thick tube surrounds cylinders
6 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Tube sealed with exterior grade black powder-coat paint
Industrial and commercial use
Made in the USA
3 Cylinders (1x3) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR1X3PSFS
Cylinder capacity: 1-3
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
16"w
x
38"d x 72"h
Gas Cylinder Storage Rack Features:
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
2" square steel tube continuously seam welded, 0.125" thick
Holds three cylinders, one wide by three deep
Two levels of welded steel chains (19" long each)
4 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Gas cylinder rack includes snaps for each cylinder
Sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
2 Cylinders (2x1) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR2X1PSFS
Cylinder capacity: 1-2
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
30"w
x
16"d x 72"h
Gas Cylinder Storage Rack Features:
Cylinder rack meets USGS high seismic hazard zone requirements when installed properly
Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
2" square steel tube continuously seam welded
Holds two cylinders, two wide by one deep
Two levels of welded steel chains (19" long each)
3 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Gas cylinder rack includes snaps for each cylinder
Sealed with exterior grade powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
2 Cylinders - Firewall - Gas Cylinder Rack
USA Safety Model#: GRCR500FWSC
Cylinder capacity: 2
Cylinder diameters supported: One 9.5" & one 12.5"
Weight Capacity: 1,000 lbs
Cylinder rack dimensions (WxDxH):
27"w
x
13.5"d x 60"h
Cylinder Storage Rack Features:
Fully welded 1.5" square steel tubing
Holds up to 2 cylinders up to 9.5" & 12.5" in diameter
Firewall (1-hour rated) separates the two sides
3/16" steel baseplate (24"Wx13"D)
One 1/4" thick steel perma-clamp
Finished with black paint
Industrial and commercial use
Made in the USA
6 Cylinders (2x3) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR2X3FS
Cylinder capacity: 1-6
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
30"w
x
38"d x 30"h
Gas Cylinder Storage Rack Features:
Store acetylene, argon, butane, carbon dioxide (CO2), helium, hydrogen and nitrogen cylinders
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
2" square steel tube continuously seam welded, 0.125" thick
Holds six cylinders, two wide by three deep
Two levels of welded steel chains (19" long each)
Snaps for each cylinder
6 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk gas cylinder storage
Made in the USA
1 Propane Tank (20-100lb) - Adjustable Shelf - Gas Cylinder Vise
USA Safety Model#: GRACVAM
Stand capacity: 1 cylinder
Cylinder diameters: 12"-15"
Stand dimensions (WxDxH):
13"w
x
14"d x 36"h
Gas Cylinder Stand Features:
Made from high quality aluminum
Mounts to the floor or the wall
Adjustable shelf made from aluminum diamond plate
5,000 lb tested nylon ratchet strap included
High density, no-maring cushion pads for cylinder to press against
Use as a vice when replacing cylinder valves
Industrial and commercial use
Made in the USA
6 Cylinders - Hoist Hook - Lifting Eyes - Forkliftable - Cylinder Cradle Rack
USA Safety Model#: CCC6FLSC
Cylinder capacity: 6
Cylinder diameters supported: Up to 9.5"
Weight Capacity: 1,950 lbs
Cylinder rack dimensions (WxDxH):
33"w
x
23"d x 77"h
Cylinder Storage Rack Features:
Holds up to 6 cylinders up to 9.5" in diameter
Security bars bolt to frame to secure cylinders
4 lifting eyes and center hoist hook
Top-mounted two-way forklift pockets
Open base for pallet jack or forklift movement
3/16" steel floor plate (28"wx22"d)
Finished with 5 stage powder coat, black
Industrial and commercial use
Outdoor or indoor use
Made in the USA
4 Cylinders (4x1) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR4X1FS
Cylinder capacity: 1-4
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
58"w
x
16"d x 30"h
Gas Cylinder Storage Rack Features:
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
2" square steel tube continuously seam welded, 0.125" thick
Holds four cylinders, four wide by one deep
Two levels of welded steel chains (19" long each)
Snaps for each cylinder
5 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
4 Cylinders (2x2) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR2X2PSFS
Cylinder capacity: 1-4
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
30"w
x
26"d x 72"h
Gas Cylinder Storage Rack Features:
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
Process Station: 2 strut mounting rails at 67 and 72 inch height from the floo
2" square steel tube continuously seam welded, 0.125" thick
Holds four cylinders, two wide by two deep
Two levels of welded steel chains (19" long each)
6 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Gas cylinder rack includes snaps for each cylinder
Sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
6 Cylinders (3x2) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR3X2FS
Cylinder capacity: 1-6
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
44"w
x
26"d x 30"h
Gas Cylinder Storage Rack Features:
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
2" square steel tube continuously seam welded, 0.125" thick
Holds six cylinders, three wide by two deep
Two levels of welded steel chains (19" long each)
Snaps for each cylinder
8 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
2 Cylinders - Firewall - Hoist Hook - Gas Cylinder Rack
USA Safety Model#: GRCR550FWSC
Cylinder capacity: 2
Cylinder diameters supported: Up to 12.5"
Weight Capacity: 1,000 lbs
Cylinder rack dimensions (WxDxH):
27"w
x
13.5"d x 62"h
Cylinder Storage Rack Features:
Fully welded 1.5" square steel tubing
Holds up to 2 cylinders up to 12.5" in diameter
Firewall (1-hour rated) separates the two sides
Hoist hook equipped
2 - 1/4" thick steel perma-clamps
3/16" steel baseplate (24"wx13"d)
Finished with black paint
Industrial and commercial use
Made in the USA
9 Cylinders - Hoist Hook & Lifting Eyes - Forkliftable - Cylinder Cradle Rack
USA Safety Model#: CCC9FLSC
Cylinder capacity: 9
Cylinder diameters supported: Up to 9.5" (200-300 cu ft)
Weight Capacity: 2,450 lbs
Cylinder rack dimensions (WxDxH):
32"w
x
32"d x 77"h
Cylinder Storage Rack Features:
Holds up to 9 cylinders of up to 9.5" in diameter
Security bars bolt to frame to secure cylinders
4 lifting eyes and center hoist hook
Top mounted two-way forklift pockets
Open base for pallet jack or forklift movement
3/16" steel floor plate
Finished with 5 stage powder coat, black
Industrial and commercial use
Outdoor or indoor use
Made in the USA
8 Cylinders (2x4) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR2X4FS
Cylinder capacity: 1-8
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
30"w
x
50"d x 30"h
Gas Cylinder Storage Rack Features:
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
2" square steel tube continuously seam welded, 0.125" thick
Two levels of welded steel chains (19" long each)
Holds eight cylinders, two wide by four deep
Snaps for each cylinder
6 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
8 Cylinders (4x2) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR4X2FS
Cylinder capacity: 1-8
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
58"w
x
26"d x 30"h
Gas Cylinder Storage Rack Features:
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
2" square steel tube continuously seam welded, 0.125" thick
Holds eight cylinders, four wide by two deep
Two levels of welded steel chains (19" long each)
Snaps for each cylinder
10 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
3 Cylinders (3x1) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR3X1PSFS
Cylinder capacity: 1-3
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
44"w
x
16"d x 72"h
Product Features:
Cylinder rack meets USGS high seismic hazard zone requirements when installed properly
Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
2" square steel tube continuously seam welded
Holds three cylinders, three wide by one deep
Two levels of welded steel chains (19" long each)
4 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Gas cylinder rack includes snaps for each cylinder
Sealed with exterior grade powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
6 Cylinders (2x3) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR2X3PSFS
Cylinder capacity: 1-6
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
30"w
x
38"d x 72"h
Gas Cylinder Storage Rack Features:
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
2" square steel tube continuously seam welded, 0.125" thick
Holds six cylinders, two wide by three deep
Two levels of welded steel chains (19" long each)
6 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Gas cylinder rack includes snaps for each cylinder
Sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
9 Cylinders (3x3) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR3X3FS
Cylinder capacity: 1-9
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
44"w
x
38"d x 30"h
Gas Cylinder Storage Rack Features:
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
2" square steel tube continuously seam welded, 0.125" thick
Holds nine cylinders, three wide by three deep
Two levels of welded steel chains (19" long each)
Snaps for each cylinder
8 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
5 Cylinders (5x1) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR5X1FS
Cylinder capacity: 1-5
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
72"w
x
16"d x 30"h
Gas Cylinder Storage Rack Features:
2" square steel tube continuously seam welded, 0.125" thick
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
Holds five cylinders, five wide by one deep
Two levels of welded steel chains (19" long each)
Snaps for each cylinder
6 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
6 Cylinders (3x2) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR3X2PSFS
Cylinder capacity: 1-6
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
44"w
x
25"d x 72"h
Gas Cylinder Storage Rack Features:
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
2" square steel tube continuously seam welded, 0.125" thick
Holds six cylinders, three wide by two deep
Two levels of welded steel chains (19" long each)
8 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Gas cylinder rack includes snaps for each cylinder
Sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
2 Cryogenic Tanks (33" Dewar) - Liquid Gas Cylinder Rack
USA Safety Model#: BR2X1CRYO33
Cylinder capacity: 1-2
Cylinder diameters supported: 18-33"
Cylinder rack dimensions (WxDxH):
74"w
x
36"d x 40"h
Gas Cylinder Storage Rack Features:
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
Typically used for cryogenic gases in dewar tanks
Holds two large cylinders, two wide by one deep
2 levels of welded and steel chains
Snaps to secure cylinder
2" square steel tube continuously seam welded, 0.125" thick surrounds cylinders
6 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Tube sealed with exterior grade black powder-coat paint
Industrial and commercial use
Made in the USA
12 Cylinders - Hoist Hook & Lifting Eyes - Forkliftable - Cylinder Cradle Rack
USA Safety Model#: CCC12FLSC
Cylinder capacity: 12
Cylinder diameters supported: Up to 9.5 (200-300 cu ft)
Weight Capacity: 2,950 lbs
Cylinder rack dimensions (WxDxH):
33"w
x
43"d x 77"h
Cylinder Storage Rack Features:
Holds up to 12 cylinders of up to 9.5" in diameter
Security bars bolt to frame to secure cylinders
4 lifting eyes and center hoist hook
Top mounted two-way forklift pockets
Open base for pallet jack or forklift movement
3/16" steel floor plate
Finished with 5 stage powder coat, black
Industrial and commercial use
Outdoor or indoor use
Made in the USA
4 Cylinders (4x1) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR4X1PSFS
Cylinder capacity: 1-4
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
58"w
x
16"d x 72"h
Gas Cylinder Storage Rack Features:
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
2" square steel tube continuously seam welded, 0.125" thick
Holds two cylinders, one wide by two deep
Two levels of welded steel chains (19" long each)
5 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Gas cylinder rack includes snaps for each cylinder
Sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
5 Cylinders (5x1) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR5X1PSFS
Cylinder capacity: 1-5
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
72"w
x
16"d x 72"h
Gas Cylinder Storage Rack Features:
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
2" square steel tube continuously seam welded, 0.125" thick
Holds five cylinders, five wide by one deep
Two levels of welded steel chains (19" long each)
6 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Gas cylinder rack includes snaps for each cylinder
Sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
9 Cylinders (3x3) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR3X3PSFS
Cylinder capacity: 1-9
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
44"w
x
38"d x 72"h
Gas Cylinder Storage Rack Features:
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
2" square steel tube continuously seam welded, 0.125" thick
Holds nine cylinders, three wide by three deep
Two levels of welded steel chains (19" long each)
8 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Gas cylinder rack includes snaps for each cylinder
Sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
12 Cylinders (3x4) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR3X4FS
Cylinder capacity: 1-12
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
44"w
x
50"d x 30"h
Gas Cylinder Storage Rack Features:
2" square steel tube continuously seam welded, 0.125" thick
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
Holds twelve cylinders, three wide by four deep
Two levels of welded steel chains (19" long each)
Snaps for each cylinder
8 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
8 Cylinders (4x2) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR4X2PSFS
Cylinder capacity: 1-8
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
58"w
x
26"d x 72"h
Gas Cylinder Storage Rack Features:
Cylinder rack meets USGS high seismic hazard zone requirements when installed properly
Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
2" square steel tube continuously seam welded
Holds eight cylinders, four wide by two deep
Two levels of welded steel chains (19" long each)
10 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Gas cylinder rack includes snaps for each cylinder
Sealed with exterior grade powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
6 Cylinders - 16" Hinged Ramp - Gas Bottle Pallet Rack
USA Safety Model#: GP2106FS
Pallet capacity: 6
Cylinder diameters: 6"-10"
Pallet dimensions (WxDxH):
24"w
x
36"d x 37"h
Gas Tank Pallet Features:
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
Fits 6 cylinders up to 10.25" diameter or smaller
16" hinged ramp welded onto pallet (24"Wx16"D)
Two-way, fully enclosed forklift channels (3"H X 8"W)
Rack is built from 1"x2" steel tube continuously seam welded
Two levels of welded steel chains
Snaps for each cylinder
Pallet welded from 11 gauge steel
Quality powder-coat paint finish for long service life & non-skid surface
Made in the USA
10 Cylinders (5x2) - Barricade Gas Cylinder Rack
USA Safety Model#: BR5X2FS
Cylinder capacity: 1-10
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
72"w
x
26"d x 30"h
Gas Cylinder Storage Rack Features:
2" square steel tube continuously seam welded, 0.125" thick
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
Holds ten cylinders, five wide by two deep
Two levels of welded steel chains (19" long each)
Snaps for each cylinder
12 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
12 Cylinders (4x3) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR4X3FS
Cylinder capacity: 1-12
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
58"w
x
38"d x 30"h
Gas Cylinder Storage Rack Features:
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
2" square steel tube continuously seam welded, 0.125" thick
Holds twelve cylinders, four wide by three deep
Two levels of welded steel chains (19" long each)
Snaps for each cylinder
10 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
16 Cylinders - Hoist Hook - Forklift Base - Cylinder Cradle Rack
USA Safety Model#: CCP16SC
Cylinder capacity: 16
Cylinder diameters supported: Up to 9.5 (200-300 cu ft)
Weight Capacity: 4,500 lbs
Cylinder rack dimensions (WxDxH):
46"w
x
35.5"d x 83"h
Cylinder Storage Rack Features:
Holds up to 16 cylinders of up to 9.5" diameter
Security bars bolt to frame to secure cylinders
Center hoist eye
4-way forklift base
3/16" steel floor plate
Finished with 5 stage powder coat color, black
Industrial and commercial use
Outdoor or indoor use
Made in the USA
10 Cylinders (5x2) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR5X2PSFS
Cylinder capacity: 1-10
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
72"w
x
26"d x 72"h
Gas Cylinder Storage Rack Features:
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
2" square steel tube continuously seam welded, 0.125" thick
Holds ten cylinders, five wide by two deep
Two levels of welded steel chains (19" long each)
12 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Gas cylinder rack includes snaps for each cylinder
Sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
15 Cylinders (5x3) - Barricade Gas Cylinder Rack
USA Safety Model#: BR5X3FS
Cylinder capacity: 1-15
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
72"w
x
38"d x 30"h
Gas Cylinder Storage Rack Features:
2" square steel tube continuously seam welded, 0.125" thick
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
Holds fifteen cylinders, five wide by three deep
Two levels of welded steel chains (19" long each)
Snaps for each cylinder
12 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
12 Cylinders (4x3) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR4X3PSFS
Cylinder capacity: 1-12
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
58"w
x
38"d x 72"h
Gas Cylinder Storage Rack Features:
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
2" square steel tube continuously seam welded, 0.125" thick
Holds twelve cylinders, four wide by three deep
Two levels of welded steel chains (19" long each)
10 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Gas cylinder rack includes snaps for each cylinder
Sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
16 Cylinders (4x4) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR4X4FS
Cylinder capacity: 1-16
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
58"w
x
50"d x 30"h
Gas Cylinder Storage Rack Features:
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
2" square steel tube continuously seam welded, 0.125" thick
Holds sixteen cylinders, four wide by four deep
Two levels of welded steel chains (19" long each)
Snaps for each cylinder
10 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
Shop By
Shopping Options
Outdoor/Weather Resistant