1 Cylinder - Large Tanks - Self-Closing Door - Window - Vertical Storage - Blue - Gas Cylinder Cabinet

Description:
This safety cylinder cabinet holds 1 gas cylinder up to 13" diameter. It is intended to store and isolate gases like hydrogen, chlorine, ammonia and other laboratory or workplace gases. The cylinder cabinet storage is made with welded 12-gauge steel with a TGIC Polyester powder coat finish. The outside finish is textured and the inside has a smooth finish. The top of the gas cabinet is a solid panel. The door vent panel allows air to enter and exit the cabinet. The back panel (17.5"w x 26"h, 14 gauge) of the cabinet is removable and mounts from the inside of the cabinet for easier mounting of any necessary equipment. The tank is secured on the inside of the cabinet with an adjustable height bracket that includes a strap and chain. This cabinet with window has a self-closing door and has a 1/4" thick clear wire window. Cabinet floor is 11-gauge diamond plate that is approximately one inch off of the ground. There are four 0.438" pre-drilled holes in the corners for anchoring. The gas cabinet is weather resistant and can be used outdoors as a protective enclosure for your valves, regulators, and purge assemblies. Keep workers safe in the laboratory or clean room by venting hazardous gases from the room. Contact customer service for more options and to configure a custom cabinet. Overall Product Dimensions (WxDxH): 18" x 18" x 72" Cylinder not included.