1 Cylinder - Exhaust Vent - Gas Cabinet

This safety gas cabinet holds 1 gas cylinder up to 10" diameter. It is intended to store and isolate gases like hydrogen, chlorine, ammonia and other toxic laboratory gases. Correct usage complies with the International Fire Code, OSHA and NFPA 55 guidelines and will help you get approved in your next safety audit. Ventilated gas cabinet is made with welded 11-gauge steel (thicker than code requirement) with a TGIC Polyester powder coat finish. The outside finish is textured and the inside has a smooth finish. The top of the exhausted gas cabinet has a 6" diameter by 3" tall exhaust vent connection. A louvered vent panel allows air to enter cabinet for pressure relief. There is an internal 165 degree Fahrenheit sprinkler head coated with bees wax. The back panel of the cabinet is removable and mounts from the inside of the cabinet. The tank is secured on the inside of the cabinet with an adjustable height bracket that includes a strap and chain. This gas cabinet with window has a self-closing door and has a 1/4" thick clear wire window. Cabinet floor is 11-gauge diamond plate that is approximately one inch off of the ground. There are four 0.438" pre-drilled holes in the corners for anchoring. The gas cabinet works as a protective enclosure for your valves, regulators, and purge assemblies. Keep workers safe in the laboratory or clean room by venting hazardous gases from the room. Can be used for semiconductor manufacturing equipment; it meets the S2-93 safety guidelines. Contact customer service for more options and to configure a custom cabinet. This is a series 7000 gas cabinet. Overall Product Dimensions (WxDxH): 18" x 18" x 75" Cylinder not included.