Skip to Content
The store will not work correctly when cookies are disabled.
Process Stands - Cylinder Racks and Stands
-
1 Cylinder - Process Station - Gas Cylinder Rack
USA Safety Model#: PR177FS
Cylinder capacity: 1
Cylinder diameters: Up to 12"
Cylinder rack dimensions (WxDxH):
18"w
x
13.75"d x 72"h
Cylinder Rack Features:
- OSHA, NFPA (UFC) & CGA compliant
- Two 1.5" Polypropylene straps and cinch buckle included
- Cylinder rack has fully welded construction
- Quality epoxy powder paint finish for long service life
- Steel reinforced vinyl edge guards protect cylinder
- Constructed from 11 gauge and heavier plate steel
- Elevated panel (14" by 12") allows for mounting of cylinder controls, cross-over devices, etc.
- A chain set (Model # GB105FS) can be added to this product (optional)
- Industrial and commercial use
- Made in the USA
-
2 Cylinders - Process Station - Gas Cylinder Rack
USA Safety Model#: PR277FS
Cylinder capacity: 1-2
Cylinder diameters: Up to 12"
Cylinder rack dimensions (WxDxH):
28"w
x
12"d x 72"h
Cylinder Rack Features:
- OSHA, NFPA (UFC) & CGA compliant
- 1.5" Polypropylene strap and cinch buckle
- Cylinder rack has fully welded construction
- Quality epoxy powder paint finish for long service life
- Steel reinforced vinyl edge guards protect equipment
- Constructed from 11 gauge and heavier plate steel
- Elevated panel (28" by 14") allows for mounting of cylinder controls, cross-over devices, etc.
- A chain set (Model # GB105FS) can be added to this product (optional)
- Unit ships partially disassembled for freight savings & ease of use
- Unit ships LTL Freight
- Industrial and commercial use
- Made in the USA
-
3 Cylinders - Process Station - Gas Cylinder Rack
USA Safety Model#: PR377FS
Rack capacity: 1-3 cylinders
Cylinder diameters: Up to 12"
Cylinder rack dimensions (WxDxH):
40"w
x
12"d x 72"h
Cylinder Rack Features:
- OSHA, NFPA (UFC) & CGA compliant
- 1.5" Polypropylene strap and cinch buckle
- Cylinder rack has fully welded construction
- Quality epoxy powder paint finish for long service life
- Steel reinforced vinyl edge guards protect equipment
- Constructed from 11 gauge and heavier plate steel
- Elevated panel (28" by 14") allows for mounting of cylinder controls, cross-over devices, etc.
- A chain set (Model # GB105FS) can be added to this product (optional)
- Unit ships partially disassembled for freight savings & ease of use
- Cylinder stand ships LTL freight
- Industrial and commercial use
- Made in the USA
-
6 Cylinders - Back-to-Back Process Station - Gas Cylinder Stand
USA Safety Model#: PR600PFS
Stand capacity: 1-6 cylinders
Diameters supported: Up to 12"
Stand dimensions (WxDxH):
52"w
x
24"d x 72"h
Gas Cylinder Stand Features:
- OSHA, NFPA (UFC) & CGA compliant
- 1.5" Polypropylene strap and cinch buckle
- Fully welded construction
- Quality powder paint finish for long service life
- Steel reinforced vinyl edge guards protect equipment
- Constructed from 11 gauge and heavier plate steel
- Designed to mount to floor with four fasteners
- A chain set (Model # GB105FS) can be added to this product (optional)
- Process control version also available
- Ship UPS oversized rate (partially disassembled for freight savings)
- Industrial and commercial use
- Made in the USA
-
2 Cylinders (1x2) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR1X2PSFS
Cylinder capacity: 1-2
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
16"w
x
26"d x 72"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds two cylinders, one wide by two deep
- Two levels of welded steel chains
- 4 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Gas cylinder rack includes snaps for each cylinder
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
4 Cylinders - Back-to-Back Process Station - Gas Cylinder Stand
USA Safety Model#: PR400PFS
Stand capacity: 1-4 cylinders
Diameters supported: Up to 12"
Stand dimensions (WxDxH):
40"w
x
24"d x 72"h
Cylinder Stand Features:
- OSHA, NFPA (UFC) & CGA compliant
- Cylinder rack has 1.5" Polypropylene strap and cinch buckle
- Fully welded construction
- Quality powder paint finish for long service life
- Steel reinforced vinyl edge guards protect equipment
- Constructed from 11 gauge and heavier plate steel
- Designed to mount to floor with four fasteners
- A chain set (Model # GB105FS) can be added to this product (optional)
- Dual straps support each cylinder
- Ships partially assembled for UPS shipping capability
- Industrial and commercial use
- Made in the USA
-
3 Cylinders (1x3) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR1X3PSFS
Cylinder capacity: 1-3
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
16"w
x
38"d x 72"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds three cylinders, one wide by three deep
- Two levels of welded steel chains
- 4 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Gas cylinder rack includes snaps for each cylinder
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
4 Cylinders - In Line Process Station - Gas Cylinder Rack
USA Safety Model#: PR477FS
Cylinder capacity: 1-4
Cylinder diameters: Up to 12"
Cylinder rack dimensions (WxDxH):
52"w
x
14"d x 72"h
Cylinder Stand Features:
- OSHA, NFPA (UFC) & CGA compliant
- Color: Standard stock is medical white; Option for industrial gray
- 1.5" Polypropylene strap and cinch buckle
- Cylinder rack has fully welded construction
- Quality epoxy powder paint finish for long service life
- Steel reinforced vinyl edge guards protect equipment
- Constructed from 11 gauge and heavier plate steel
- Two levels of Unistrut provide regulator and control device mounting stations
- A chain set (Model # GB105FS) can be added to this product (optional)
- Unit ships ready to use by truck
- Industrial and commercial use
- Made in the USA
-
2 Cylinders (2x1) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR2X1PSFS
Cylinder capacity: 1-2
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
30"w
x
16"d x 72"h
Gas Cylinder Storage Rack Features:
- Cylinder rack meets USGS high seismic hazard zone requirements when installed properly
- Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square steel tube continuously seam welded
- Holds two cylinders, two wide by one deep
- Two levels of welded steel chains
- 3 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Gas cylinder rack includes snaps for each cylinder
- Sealed with exterior grade powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
4 Cylinders (2x2) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR2X2PSFS
Cylinder capacity: 1-4
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
30"w
x
26"d x 72"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds four cylinders, two wide by two deep
- Two levels of welded steel chains
- 6 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Gas cylinder rack includes snaps for each cylinder
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
3 Cylinders (3x1) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR3X1PSFS
Cylinder capacity: 1-3
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
44"w
x
16"d x 72"h
Product Features:
- Cylinder rack meets USGS high seismic hazard zone requirements when installed properly
- Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square steel tube continuously seam welded
- Holds three cylinders, three wide by one deep
- Two levels of welded steel chains
- 4 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Gas cylinder rack includes snaps for each cylinder
- Sealed with exterior grade powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
6 Cylinders (2x3) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR2X3PSFS
Cylinder capacity: 1-6
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
30"w
x
38"d x 72"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds six cylinders, two wide by three deep
- Two levels of welded steel chains
- 6 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Gas cylinder rack includes snaps for each cylinder
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
6 Cylinders (3x2) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR3X2PSFS
Cylinder capacity: 1-6
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
44"w
x
25"d x 72"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds six cylinders, three wide by two deep
- Two levels of welded steel chains
- 8 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Gas cylinder rack includes snaps for each cylinder
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
4 Cylinders (4x1) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR4X1PSFS
Cylinder capacity: 1-4
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
58"w
x
16"d x 72"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds two cylinders, one wide by two deep
- Two levels of welded steel chains
- 5 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Gas cylinder rack includes snaps for each cylinder
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
9 Cylinders (3x3) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR3X3PSFS
Cylinder capacity: 1-9
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
44"w
x
38"d x 72"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds nine cylinders, three wide by three deep
- Two levels of welded steel chains
- 8 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Gas cylinder rack includes snaps for each cylinder
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
8 Cylinders (4x2) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR4X2PSFS
Cylinder capacity: 1-8
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
58"w
x
26"d x 72"h
Gas Cylinder Storage Rack Features:
- Cylinder rack meets USGS high seismic hazard zone requirements when installed properly
- Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square steel tube continuously seam welded
- Holds eight cylinders, four wide by two deep
- Two levels of welded steel chains
- 10 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Gas cylinder rack includes snaps for each cylinder
- Sealed with exterior grade powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
5 Cylinders (5x1) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR5X1PSFS
Cylinder capacity: 1-5
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
72"w
x
16"d x 72"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds five cylinders, five wide by one deep
- Two levels of welded steel chains
- 6 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Gas cylinder rack includes snaps for each cylinder
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
10 Cylinders (5x2) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR5X2PSFS
Cylinder capacity: 1-10
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
72"w
x
26"d x 72"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds ten cylinders, five wide by two deep
- Two levels of welded steel chains
- 12 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Gas cylinder rack includes snaps for each cylinder
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
12 Cylinders (4x3) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR4X3PSFS
Cylinder capacity: 1-12
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
58"w
x
38"d x 72"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds twelve cylinders, four wide by three deep
- Two levels of welded steel chains
- 10 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Gas cylinder rack includes snaps for each cylinder
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA