Heavy Duty Barricade - Cylinder Racks and Stands

38 Items

per page
Set Descending Direction
  1. 1 Cylinder (1x1) - Barricade - Gas Cylinder Rack
    1 Cylinder (1x1) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR1X1FS
    Cylinder capacity: 1
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 16"w x 16"d x 30"h

    Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds one cylinder
    • Two levels of welded steel chains
    • 3 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade Black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Industrial and commercial use
    • Made in the USA
    $690.00
  2. 1 Cryogenic Tank (22" Dewar) - Liquid Gas Cylinder Rack
    1 Cryogenic Tank (22" Dewar) - Liquid Gas Cylinder Rack
    USA Safety Model#: BR1X1CRYO22
    Cylinder capacity: 1
    Cylinder diameters supported: 18"-22"
    Cylinder rack dimensions (WxDxH): 28"w x 26"d x 40"h

    Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Typically used for cryogenic gases
    • 2 levels of welded and steel chains
    • Snaps to secure cylinder
    • 2" square steel tube continuously seam welded, 0.125" thick surrounds cylinders
    • 4 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Tube sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Industrial and commercial use
    • Made in the USA
    $750.00
  3. 2 Cylinders (1x2) - Barricade - Gas Cylinder Rack
    2 Cylinders (1x2) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR1X2FS
    Cylinder capacity: 1-2
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 16"w x 26"d x 30"h

    Gas Tank Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds two cylinders, one wide by two deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 4 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $785.00
  4. 3 Cylinders (1x3) - Barricade - Gas Cylinder Rack
    3 Cylinders (1x3) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR1X3FS
    Cylinder capacity: 1-3
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 16"w x 38"d x 30"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds three cylinders, one wide by three deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 4 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $865.00
  5. 2 Cylinders (2x1) - Barricade - Gas Cylinder Rack
    2 Cylinders (2x1) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR2X1FS
    Cylinder capacity: 1-2
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 30"w x 16"d x 30"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds two cylinders, two wide by one deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 3 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Cylinder rack sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $915.00
  6. 2 Cryogenic Tanks (22" Dewar) - Liquid Gas Cylinder Rack
    2 Cryogenic Tanks (22" Dewar) - Liquid Gas Cylinder Rack
    USA Safety Model#: BR2X1CRYO22
    Cylinder capacity: 1-2
    Cylinder diameters supported: 18-22"
    Cylinder rack dimensions (WxDxH): 54"w x 26"d x 40"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Typically used for cryogenic gases in dewar tanks
    • Holds two large cylinders, two wide by one deep
    • 2 levels of welded and steel chains
    • Snaps to secure cylinder
    • 2" square steel tube continuously seam welded, 0.125" thick tube surrounds cylinders
    • 6 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Tube sealed with exterior grade black powder-coat paint
    • Industrial and commercial use
    • Made in the USA
    $980.00
  7. 4 Cylinders (1x4) - Barricade - Gas Cylinder Rack
    4 Cylinders (1x4) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR1X4FS
    Cylinder capacity: 1-4
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 16"w x 50"d x 30"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds four cylinders, one wide by four deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 4 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Gas cylinder rack sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $985.00
  8. 1 Cryogenic Tank (33" Dewar) - Liquid Gas Cylinder Rack
    1 Cryogenic Tank (33" Dewar) - Liquid Gas Cylinder Rack
    USA Safety Model#: BR1X1CRYO33
    Cylinder capacity: 1
    Cylinder diameters supported: 18-33"
    Cylinder rack dimensions (WxDxH): 38"w x 36"d x 40"h

    Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Typically used for cryogenic gases in dewar tanks
    • 2 levels of welded and steel chains
    • Snaps to secure cylinder
    • 4 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • 2" square steel tube continuously seam welded, 0.125" thick surrounds cylinders
    • Tube sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Industrial and commercial use
    • Made in the USA
    $990.00
  9. 3 Cylinders (1x3) - Barricade - Process Station - Gas Cylinder Rack
    3 Cylinders (1x3) - Barricade - Process Station - Gas Cylinder Rack
    USA Safety Model#: BR1X3PSFS
    Cylinder capacity: 1-3
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 16"w x 38"d x 72"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds three cylinders, one wide by three deep
    • Two levels of welded steel chains
    • 4 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Gas cylinder rack includes snaps for each cylinder
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,075.00
  10. 4 Cylinders (2x2) - Barricade - Gas Cylinder Rack
    4 Cylinders (2x2) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR2X2FS
    Cylinder capacity: 1-4
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 30"w x 26"d x 30"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds four cylinders, two wide by two deep
    • Two levels of welded steel chains
    • 6 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Gas cylinder rack includes snaps for each cylinder
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,125.00
  11. 2 Cylinders (2x1) - Barricade - Process Station - Gas Cylinder Rack
    2 Cylinders (2x1) - Barricade - Process Station - Gas Cylinder Rack
    USA Safety Model#: BR2X1PSFS
    Cylinder capacity: 1-2
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 30"w x 16"d x 72"h

    Gas Cylinder Storage Rack Features:
    • Cylinder rack meets USGS high seismic hazard zone requirements when installed properly
    • Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded
    • Holds two cylinders, two wide by one deep
    • Two levels of welded steel chains
    • 3 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Gas cylinder rack includes snaps for each cylinder
    • Sealed with exterior grade powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,150.00
  12. 3 Cylinders (3x1) - Barricade - Gas Cylinder Rack
    3 Cylinders (3x1) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR3X1FS
    Cylinder capacity: 1-3
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 44"w x 16"d x 30"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds three cylinders, three wide by two deep
    • Cylinder rack includes two levels of welded steel chains
    • Snaps for each cylinder
    • 4 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,160.00
  13. 6 Cylinders (2x3) - Barricade - Gas Cylinder Rack
    6 Cylinders (2x3) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR2X3FS
    Cylinder capacity: 1-6
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 30"w x 38"d x 30"h

    Gas Cylinder Storage Rack Features:
    • Store acetylene, argon, butane, carbon dioxide (CO2), helium, hydrogen and nitrogen cylinders
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds six cylinders, two wide by three deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 6 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk gas cylinder storage
    • Made in the USA
    $1,230.00
  14. 4 Cylinders (2x2) - Barricade - Process Station - Gas Cylinder Rack
    4 Cylinders (2x2) - Barricade - Process Station - Gas Cylinder Rack
    USA Safety Model#: BR2X2PSFS
    Cylinder capacity: 1-4
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 30"w x 26"d x 72"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds four cylinders, two wide by two deep
    • Two levels of welded steel chains
    • 6 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Gas cylinder rack includes snaps for each cylinder
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,250.00
  15. 3 Cylinders (3x1) - Barricade - Process Station - Gas Cylinder Rack
    3 Cylinders (3x1) - Barricade - Process Station - Gas Cylinder Rack
    USA Safety Model#: BR3X1PSFS
    Cylinder capacity: 1-3
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 44"w x 16"d x 72"h

    Product Features:
    • Cylinder rack meets USGS high seismic hazard zone requirements when installed properly
    • Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded
    • Holds three cylinders, three wide by one deep
    • Two levels of welded steel chains
    • 4 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Gas cylinder rack includes snaps for each cylinder
    • Sealed with exterior grade powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,350.00
  16. 6 Cylinders (2x3) - Barricade - Process Station - Gas Cylinder Rack
    6 Cylinders (2x3) - Barricade - Process Station - Gas Cylinder Rack
    USA Safety Model#: BR2X3PSFS
    Cylinder capacity: 1-6
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 30"w x 38"d x 72"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds six cylinders, two wide by three deep
    • Two levels of welded steel chains
    • 6 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Gas cylinder rack includes snaps for each cylinder
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,350.00
  17. 4 Cylinders (4x1) - Barricade - Gas Cylinder Rack
    4 Cylinders (4x1) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR4X1FS
    Cylinder capacity: 1-4
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 58"w x 16"d x 30"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds four cylinders, four wide by one deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 5 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,410.00
  18. 8 Cylinders (2x4) - Barricade - Gas Cylinder Rack
    8 Cylinders (2x4) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR2X4FS
    Cylinder capacity: 1-8
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 30"w x 50"d x 30"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Two levels of welded steel chains
    • Holds eight cylinders, two wide by four deep
    • Snaps for each cylinder
    • 6 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,420.00
  19. 2 Cryogenic Tanks (33" Dewar) - Liquid Gas Cylinder Rack
    2 Cryogenic Tanks (33" Dewar) - Liquid Gas Cylinder Rack
    USA Safety Model#: BR2X1CRYO33
    Cylinder capacity: 1-2
    Cylinder diameters supported: 18-33"
    Cylinder rack dimensions (WxDxH): 74"w x 36"d x 40"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Typically used for cryogenic gases in dewar tanks
    • Holds two large cylinders, two wide by one deep
    • 2 levels of welded and steel chains
    • Snaps to secure cylinder
    • 2" square steel tube continuously seam welded, 0.125" thick surrounds cylinders
    • 6 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Tube sealed with exterior grade black powder-coat paint
    • Industrial and commercial use
    • Made in the USA
    $1,430.00
  20. 6 Cylinders (3x2) - Barricade - Gas Cylinder Rack
    6 Cylinders (3x2) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR3X2FS
    Cylinder capacity: 1-6
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 44"w x 26"d x 30"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds six cylinders, three wide by two deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 8 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,450.00
  21. 6 Cylinders (3x2) - Barricade - Process Station - Gas Cylinder Rack
    6 Cylinders (3x2) - Barricade - Process Station - Gas Cylinder Rack
    USA Safety Model#: BR3X2PSFS
    Cylinder capacity: 1-6
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 44"w x 25"d x 72"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds six cylinders, three wide by two deep
    • Two levels of welded steel chains
    • 8 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Gas cylinder rack includes snaps for each cylinder
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,500.00
  22. 8 Cylinders (4x2) - Barricade - Gas Cylinder Rack
    8 Cylinders (4x2) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR4X2FS
    Cylinder capacity: 1-8
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 58"w x 26"d x 30"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds eight cylinders, four wide by two deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 10 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,530.00
  23. 4 Cylinders (4x1) - Barricade - Process Station - Gas Cylinder Rack
    4 Cylinders (4x1) - Barricade - Process Station - Gas Cylinder Rack
    USA Safety Model#: BR4X1PSFS
    Cylinder capacity: 1-4
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 58"w x 16"d x 72"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds two cylinders, one wide by two deep
    • Two levels of welded steel chains
    • 5 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Gas cylinder rack includes snaps for each cylinder
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,590.00
  24. 9 Cylinders (3x3) - Barricade - Gas Cylinder Rack
    9 Cylinders (3x3) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR3X3FS
    Cylinder capacity: 1-9
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 44"w x 38"d x 30"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds nine cylinders, three wide by three deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 8 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,600.00
  25. 12 Cylinders (3x4) - Barricade - Gas Cylinder Rack
    12 Cylinders (3x4) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR3X4FS
    Cylinder capacity: 1-12
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 44"w x 50"d x 30"h

    Gas Cylinder Storage Rack Features:
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Holds twelve cylinders, three wide by four deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 8 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,700.00
  26. 5 Cylinders (5x1) - Barricade - Gas Cylinder Rack
    5 Cylinders (5x1) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR5X1FS
    Cylinder capacity: 1-5
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 72"w x 16"d x 30"h

    Gas Cylinder Storage Rack Features:
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Holds five cylinders, five wide by one deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 6 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,700.00
  27. 9 Cylinders (3x3) - Barricade - Process Station - Gas Cylinder Rack
    9 Cylinders (3x3) - Barricade - Process Station - Gas Cylinder Rack
    USA Safety Model#: BR3X3PSFS
    Cylinder capacity: 1-9
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 44"w x 38"d x 72"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds nine cylinders, three wide by three deep
    • Two levels of welded steel chains
    • 8 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Gas cylinder rack includes snaps for each cylinder
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,700.00
  28. 6 Cylinders - 16" Hinged Ramp - Gas Bottle Pallet Rack
    6 Cylinders - 16" Hinged Ramp - Gas Bottle Pallet Rack
    USA Safety Model#: GP2106FS
    Pallet capacity: 6
    Cylinder diameters: 6"-10"
    Pallet dimensions (WxDxH): 24"w x 36"d x 37"h

    Gas Tank Pallet Features:
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Fits 6 cylinders up to 10.25" diameter or smaller
    • 16" hinged ramp welded onto pallet (24"Wx16"D)
    • Two-way, fully enclosed forklift channels (3"H X 8"W)
    • Rack is built from 1"x2" steel tube continuously seam welded
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • Pallet welded from 11 gauge steel
    • Quality powder-coat paint finish for long service life & non-skid surface
    • Made in the USA
    $1,820.00
  29. 8 Cylinders (4x2) - Barricade - Process Station - Gas Cylinder Rack
    8 Cylinders (4x2) - Barricade - Process Station - Gas Cylinder Rack
    USA Safety Model#: BR4X2PSFS
    Cylinder capacity: 1-8
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 58"w x 26"d x 72"h

    Gas Cylinder Storage Rack Features:
    • Cylinder rack meets USGS high seismic hazard zone requirements when installed properly
    • Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded
    • Holds eight cylinders, four wide by two deep
    • Two levels of welded steel chains
    • 10 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Gas cylinder rack includes snaps for each cylinder
    • Sealed with exterior grade powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,830.00
  30. 5 Cylinders (5x1) - Barricade - Process Station - Gas Cylinder Rack
    5 Cylinders (5x1) - Barricade - Process Station - Gas Cylinder Rack
    USA Safety Model#: BR5X1PSFS
    Cylinder capacity: 1-5
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 72"w x 16"d x 72"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds five cylinders, five wide by one deep
    • Two levels of welded steel chains
    • 6 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Gas cylinder rack includes snaps for each cylinder
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,910.00
  31. 12 Cylinders (4x3) - Barricade - Gas Cylinder Rack
    12 Cylinders (4x3) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR4X3FS
    Cylinder capacity: 1-12
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 58"w x 38"d x 30"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds twelve cylinders, four wide by three deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 10 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,980.00
  32. 10 Cylinders (5x2) - Barricade Gas Cylinder Rack
    10 Cylinders (5x2) - Barricade Gas Cylinder Rack
    USA Safety Model#: BR5X2FS
    Cylinder capacity: 1-10
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 72"w x 26"d x 30"h

    Gas Cylinder Storage Rack Features:
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Holds ten cylinders, five wide by two deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 12 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $2,100.00
  33. 10 Cylinders (5x2) - Barricade - Process Station - Gas Cylinder Rack
    10 Cylinders (5x2) - Barricade - Process Station - Gas Cylinder Rack
    USA Safety Model#: BR5X2PSFS
    Cylinder capacity: 1-10
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 72"w x 26"d x 72"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds ten cylinders, five wide by two deep
    • Two levels of welded steel chains
    • 12 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Gas cylinder rack includes snaps for each cylinder
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $2,200.00
  34. 16 Cylinders (4x4) - Barricade - Gas Cylinder Rack
    16 Cylinders (4x4) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR4X4FS
    Cylinder capacity: 1-16
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 58"w x 50"d x 30"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds sixteen cylinders, four wide by four deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 10 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $2,300.00
  35. 15 Cylinders (5x3) - Barricade Gas Cylinder Rack
    15 Cylinders (5x3) - Barricade Gas Cylinder Rack
    USA Safety Model#: BR5X3FS
    Cylinder capacity: 1-15
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 72"w x 38"d x 30"h

    Gas Cylinder Storage Rack Features:
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Holds fifteen cylinders, five wide by three deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 12 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $2,300.00
  36. 12 Cylinders (4x3) - Barricade - Process Station - Gas Cylinder Rack
    12 Cylinders (4x3) - Barricade - Process Station - Gas Cylinder Rack
    USA Safety Model#: BR4X3PSFS
    Cylinder capacity: 1-12
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 58"w x 38"d x 72"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds twelve cylinders, four wide by three deep
    • Two levels of welded steel chains
    • 10 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Gas cylinder rack includes snaps for each cylinder
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $2,300.00
  37. 12 Cylinders - 16" Hinged Ramp - Gas Bottle Pallet Rack
    12 Cylinders - 16" Hinged Ramp - Gas Bottle Pallet Rack
    USA Safety Model#: GP2112FS
    Pallet capacity: 12
    Cylinder diameters: 6"-11"
    Pallet dimensions (WxDxH): 48"w x 48"d x 33"h

    Gas Tank Pallet Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • Fits 12 cylinders (300 CFT capacity) up to 11" diameter or smaller
    • 16" hinged ramp welded onto pallet (48"Wx16"D)
    • Two-way, fully enclosed forklift channels (3"H X 8"W)
    • Rack is built from 2" square steel tube continuously seam welded
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • Pallet welded from 11 gauge steel
    • Quality powder-coat paint finish for long service life & non-skid surface
    • Made in the USA
    $2,700.00
  38. 20 Cylinders (5x4) - Barricade Gas Cylinder Rack
    20 Cylinders (5x4) - Barricade Gas Cylinder Rack
    USA Safety Model#: BR5X4FS
    Cylinder capacity: 1-20
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 72"w x 50"d x 30"h

    Gas Cylinder Storage Rack Features:
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Holds twenty cylinders, five wide by four deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 12 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $3,100.00

38 Items

per page
Set Descending Direction
Clear All