1 Cylinder - Truck Transport - Gas Cylinder Stand
In stock
Model #
GR2175FS
$395.00
Call 1-877-805-8650 to order or request quote by phone.
Status:
In stock
Shipping:
Ships 1-3 business days from order date. You will be sent a tracking # upon shipment.
Stand capacity: 1 cylinder
Cylinder diameters: 4"-10"
Cylinder diameters: 4"-10"
Stand dimensions:
16.75"w x 10.5"d x 36"h
Gas Cylinder Stand Features:
- OSHA, NFPA (UFC) & CGA compliant
- Polypropylene strap and cinch buckle
- Cylinder stand has fully welded construction
- Quality powder-coat paint finish for long service life
- Steel reinforced vinyl edge guards protect equipment
- Constructed from 11 gauge and heavier plate steel
- Chain sets can be added for secondary support
- Vise-like holding capability with post and locking ring system
- Locking post can extend 40" to 66" height
- Use of safety cylinder caps (Models SC2500FS or DOT standard caps)
- Ideal system for over-the-road cylinder transportation
- Includes both high pressure and low pressure plates
- A chain set (Model # GB105FS) can be added to this product (optional)
- Industrial and commercial use
- Ships by parcel or larger quantities by freight
- Made in the USA
- Product weight: 35 lbs
Description:
This model includes the features found on our standard cylinder rack (see Model GR275FS) and adds the vise-like holding capability of the USA Safety cylinder locking ring system. With use of safety cylinder caps (Models SC2500FS or DOT Standard caps), this unit makes an ideal system for over-the-road cylinder transportation. Accommodates single cylinders from 4.0 to 10.0 inch diameter. Locking post can extend 40" to 66" height. Option to add a chain set for another means of restraint. Cylinder stand dimensions (WxDxH): 16.75"x10.5"x36" (post can extend to 66" height). Ships by parcel or larger quantities by freight.
MPN:
35286 (previously G-2175)
Get more information:
Call 1-877-805-8650 (M-F, 9-5 p.m. CST) if you have questions about this product.
Call 1-877-805-8650 (M-F, 9-5 p.m. CST) if you have questions about this product.
1. Place stand frame on mounting surface. Attach with fasteners at least 5/16” diameter Grade 5.
2. Slide locking posts in square holes into stand frame. Use wing bolt in the rear of the cylinder bracket to secure in place.
3. Attach Locking rings to posts using 2 wing bolts each and 2 flat washers each.
4. Place cylinders on rack and secure with straps.
5. Slide locking post and ring assemble around the threads of the cylinder. Replace and tighten DOT approved safety cap (not included).
6. Tighten wing bolts.
2. Slide locking posts in square holes into stand frame. Use wing bolt in the rear of the cylinder bracket to secure in place.
3. Attach Locking rings to posts using 2 wing bolts each and 2 flat washers each.
4. Place cylinders on rack and secure with straps.
5. Slide locking post and ring assemble around the threads of the cylinder. Replace and tighten DOT approved safety cap (not included).
6. Tighten wing bolts.
1 year warranty against manufacturing defects.
Small quantities will ship parcel. Larger quantities (>150 lbs) will ship freight.
Compare Similar Products