Skip to Content
The store will not work correctly when cookies are disabled.
JavaScript seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Javascript in your browser.
Home
Cylinder Carts and Dollies
Cylinder Carts and Dollies
1 Cylinder - Oxygen & Medical Gases (D,E, M9, M60) - Green - Cylinder Cart
USA Safety Model#: GC900108SC
Cylinder capacity: 1
Weight capacity: 80 lbs (estimated)
Supported cylinder sizes: D, E, M9, M60 (8" diameter, 36" height)
Cart dimensions (WxDxH):
12.5"w
x
14"d x 42"h
Oxygen Tank Cart Features:
Transport one small cylinder
Two 8" semi-pneumatic wheels with plastic hub (1.75" wide)
Designed with a simple scoop 8.25" x 8.25" baseplate
Handle height is approximately 42"
All welded steel construction
Includes safety chain
Powder coated green finish
Cylinder not included
Made in the USA
MIG/Inverter/Plasma - Basic - Welding Cart
USA Safety Model#: WCMM8SC
Cart capacity: Welder power source and one cylinder up to 9.5" in diameter
Cart dimensions (WxDxH):
32"w
x
17"d x 17"h
Welding Cart Features:
Holds most MIG/Inverter/Plasma units
Holds 1 gas cylinder up to 9.5" in diameter
Includes chain to secure cylinder to cart
Top shelf platform 20"x12"
Large bottom shelf for storage of gear
Wrap around cable holders
2 solid, fixed 8" polyolefin wheels and 2 swivel polyolefin casters
Steel construction with powder-coat finish
For light industrial use
Assembly required
2 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Cart
USA Safety Model#: GCMDE2SC
Cylinder capacity: 2
Supported cylinder sizes: D, E (4.5" diameter)
Weight capacity: 250 lbs
Cart dimensions (WxDxH):
15.5"w
x
8"d x 35"h
Oxygen Tank Cart Features:
Holds oxygen and other small medical gas tanks
Two 8" semi-pneumatic wheels (1.75" wide)
Handle height is approximately 35"
5" square cylinder opening
Cylinders sit approximately 5.5" off of the ground
All welded steel construction
Welded steel supports
Powder coated green finish
4 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Cart
USA Safety Model#: GCMDE4SC
Cylinder capacity: 4
Supported cylinder sizes: D, E (4.5" diameter)
Weight capacity: 250 lbs
Cart dimensions (WxDxH):
12"w
x
12"d x 35"h
Oxygen Tank Cart Features:
Holds oxygen and other medical gas tanks
Two 8" semi-pneumatic wheels (1.75" wide)
Handle height is approximately 35"
5" square cylinder opening
Cylinders sit approximately 5.5" off of the ground
All welded steel construction
Welded steel supports
Powder coated green finish
Cylinders not included
Made in the USA
4 Cylinders - Oxygen & Medical Gases (D,E) - Red - Cylinder Cart
USA Safety Model#: GCMDE4RSC
Cylinder capacity: 4
Supported cylinder sizes: D, E (4.5" diameter)
Weight capacity: 250 lbs
Cart dimensions (WxDxH):
12"w
x
12"d x 35"h
Oxygen Tank Cart Features:
Holds oxygen and other medical gas tanks
Two 8" semi-pneumatic wheels (1.75" wide)
Handle height is approximately 35"
5" square cylinder opening
Cylinders sit approximately 5.5" off of the ground
All welded steel construction
Welded steel supports
Powder coated red finish
Cylinders not included
Made in the USA
6 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Cart
USA Safety Model#: GCMDE6SC
Cylinder capacity: 6
Supported cylinder sizes: D, E (4.5" diameter)
Weight capacity: 250 lbs
Cart dimensions (WxDxH):
18.5"w
x
21.5"d x 35"h
Oxygen Tank Cart Features:
Holds oxygen and other medical gas tanks
Two 8" semi-pneumatic wheels (1.75" wide)
Handle height is approximately 35"
5" square cylinder opening
Cylinders sit approximately 5.5" off of the ground
All welded steel construction
Welded steel supports
Powder coated green finish
1 Propane Tank - Green - Cylinder Dolly
USA Safety Model#: HT75010PSC
Dolly capacity: 1 tank (33lb, 43lb, or 100 lb) or stack up to 2 tanks (33lb or 43lb only)
Diameters supported: Up to 16"
Weight capacity: 400 lb
Dolly dimensions (WxDxH):
23.5"w
x
17.5"d x 52"h
Cylinder Dolly Features:
Hold one 33lb, 43lb, or 100lb propane tank or stack two 33lb or 43lb tanks
OSHA, NFPA (UFC) & CGA compliant
Constructed from steel with sturdy bracing
10" semi-pneumatic wheels with steel hubs with ball bearings (wheel dimensions 10" x 2.75")
Continuous handle
Two chains included to secure cylinders
Powder coated for durability
Industrial, medical and commercial use
Made in the USA
2 Cylinders - Green - Gas Cylinder Dolly
USA Safety Model#: HT75020SC
Dolly capacity: 2 cylinders
Diameters supported: Up to 9.5" each
Weight capacity: 400 lb
Dolly dimensions (WxDxH):
20"w
x
27"d x 49"h
Cylinder Dolly Features:
OSHA, NFPA (UFC) & CGA compliant
Constructed from steel with sturdy bracing
10" semi-pneumatic wheels with steel hubs with ball bearings (10" x 2.75")
Continuous handle
Chains to secure cylinders
Powder coated green
Industrial, medical and commercial use
Made in the USA
6 Cylinders - Oxygen & Medical Gases (D,E) - Red - Cylinder Cart
USA Safety Model#: GCMDE6RSC
Cylinder capacity: 6
Supported cylinder sizes: D, E (4.5" diameter)
Weight capacity: 250 lbs
Cart dimensions (WxDxH):
18.5"w
x
21.5"d x 35"h
Oxygen Tank Cart Features:
Holds oxygen and other medical gas tanks
Two 8" semi-pneumatic wheels (1.75" wide)
Handle height is approximately 35"
5" square cylinder opening
Cylinders sit approximately 5.5" off of the ground
All welded steel construction
Welded steel supports
Powder coated red finish
2 Cylinders - Tool Tray - Green - Welding Cart
USA Safety Model#: HT40114SC
Welding cart capacity: 2 cylinders
Cylinder diameters supported: Up to 12.5" (fuel) & 9.5" (oxygen)
Weight capacity: 500 lbs
Cylinder Carts dimensions (WxDxH):
31"w
x
13.5"d x 46"h
Cylinder Dolly Features:
OSHA, NFPA (UFC) & CGA compliant
3" high tool tray for holding equipment
14" semi-pneumatic wheels with steel hubs complete with 3/4" ball bearings (wheel dimensions 14" x 1.75")
Continuous handle
Chains to secure cylinders
Powder coated for durability
Made in the USA
1 Cryogenic Tank (20" Dewar) - Low Profile - 6 Wheels - Gas Cylinder Dolly
USA Safety Model#: GC8860SC
Capacity: 1 cylinder (160 - 230 Liter)
Cylinder diameters supported: 20"
Weight capacity: 540 lbs
Cart dimensions (WxDxH):
24"w
x
33"d x 6"h
Cryogenic Tank Cart Features:
Low profile design for easy loading and unloading
6 wheels allows the cylinder to be easily moved
Baseplate is 21.5"x21.5"
Made from 1/4" steel
Quiet swivel casters (3"x0.75") with ball bearings
Durable powder coated finish
Industrial, medical and commercial use
Use with gases like liquid nitrogen, oxygen, carbon dioxide, argon
Ships parcel
Made in the USA
2 Cylinders - Flat Free Tires - Green - Gas Cylinder Dolly
USA Safety Model#: HT75120SC
Dolly capacity: 2 cylinders
Diameters supported: Up to 9.5" each
Weight capacity: 400 lb
Dolly dimensions (WxDxH):
22"w
x
27"d x 49"h
Cylinder Dolly Features:
OSHA, NFPA (UFC) & CGA compliant
Constructed from steel with sturdy bracing
10" pneumatic wheels, steel hubs, no-flat sealant (10" x 4")
Continuous handle
Chains to secure cylinders
Powder coated green
Industrial, medical and commercial use
Made in the USA
1 Cylinder - Gas Cylinder Dolly
USA Safety Model#: HT901FS
Dolly capacity: 1 cylinder
Weight capacity: 300 lbs
Diameters supported: Up to 12"
Dolly dimensions (WxDxH):
18"w
x
18"d x 47"h
Cylinder Dolly Features:
OSHA, NFPA (UFC) & CGA compliant
8" steel hub welded semi-pneumatic wheels
3/16" steel supports and round steel tube
Constructed from 11 gauge HR steel
Polypropylene strap and cinch buckle
Fully welded construction
Quality powder-coat paint finish for long service life
Cylinder dolly ships UPS oversize rate
Industrial, medical and commercial use
Made in the USA
1 Cylinder - Heavy Duty - Gas Cylinder Dolly
USA Safety Model#: HT902FS
Dolly capacity: 1 cylinder
Weight capacity: 700 lbs
Diameters supported: Up to 12"
Dolly dimensions (WxDxH):
19"w
x
18"d x 47"h
Cylinder Dolly Features:
OSHA, NFPA (UFC) & CGA compliant
10.5" fully pneumatic wheels
3/16" steel supports and round steel tube
Cylinder dolly constructed from 11 gauge HR steel
Polypropylene strap and cinch buckle
Fully welded construction
Quality powder-coat paint finish for long service life
Ships UPS oversize rate
Industrial, medical and commercial use
Made in the USA
1 Propane Tank - Flat-Free Tires - Green - Cylinder Dolly
USA Safety Model#: HT75110PSC
Dolly capacity: 1 tank (33lb, 43lb, or 100 lb) or stack up to 2 tanks (33lb or 43lb only)
Diameters supported: Up to 16"
Weight capacity: 600 lb
Dolly dimensions (WxDxH):
26"w
x
17.5"d x 52"h
Cylinder Dolly Features:
Hold one 33lb, 43lb, or 100lb propane tank or stack two 33lb or 43lb tanks
OSHA, NFPA (UFC) & CGA compliant
Constructed from steel with sturdy bracing
10" pneumatic tires with steel hubs and no flat sealant (wheel dimensions 10" x 4")
Continuous handle
Two chains included to secure cylinders
Powder coated for durability
Industrial, medical and commercial use
Made in the USA
12 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Cart
USA Safety Model#: GCMDE12SC
Cylinder capacity: 12
Supported cylinder sizes: D, E (4.5" diameter)
Weight capacity: 2400 lbs
Cart dimensions (WxDxH):
29"w
x
17"d x 42"h
Oxygen Tank Cart Features:
Holds oxygen and other medical gas tanks
4 ultra-quiet 4" casters (2 rear swivel with break and 2 rigid casters)
Handle height is approximately 35"
5" square cylinder opening
Cylinders sit approximately 5.5" off of the ground
All welded steel construction
Welded steel supports
Powder coated green finish
2 Cylinders - Steering Casters - Green - Gas Cylinder Dolly
USA Safety Model#: HT750203RCSC
Dolly capacity: 2 cylinders
Diameters supported: Up to 9.5" each
Weight capacity: 400 lb
Dolly dimensions (WxDxH):
20"w
x
27"d x 48"h
Cylinder Dolly Features:
OSHA, NFPA (UFC) & CGA compliant
Constructed from steel with sturdy bracing
10" semi-pneumatic wheels with steel hubs with ball bearings (10" x 2.75")
Front 3 Ply Rotacasters
Continuous handle
Chains to secure cylinders
Powder coated green
Industrial, medical and commercial use
Made in the USA
2 Cylinders - Gas Cylinder Dolly
USA Safety Model#: HT952FS
Dolly capacity: 2 cylinders
Cylinder diameter: Up to 12"
Weight capacity: 700 lbs
Dolly dimensions (WxDxH):
32.75"w
x
19.25"d x 48.25"h
Cylinder Dolly Features:
OSHA, NFPA (UFC) & CGA compliant
10.5" fully pneumatic wheels
3/16" steel supports and round steel tube
Constructed from 11 and 10 gauge HR steel
Cylinder dolly has polypropylene strap and cinch buckle
Fully welded construction
Quality powder-coat paint finish for long service life
Made in the USA
1 Cylinder - Flat Free Tires - Gas Cylinder Dolly
USA Safety Model#: HT902FFFS
Dolly capacity: 1 cylinder
Weight capacity: 500 lbs
Diameters supported: Up to 12"
Dolly dimensions (WxDxH):
19"w
x
18"d x 47"h
Cylinder Dolly Features:
OSHA, NFPA (UFC) & CGA compliant
10.5" urethane filled flat free tires
3/16" steel supports and round steel tube
Cylinder dolly constructed from 11 gauge HR steel
Polypropylene strap and cinch buckle
Fully welded construction
Quality powder-coat paint finish for long service life
Ships UPS oversize rate
Industrial, medical and commercial use
Made in the USA
12 Cylinders - Oxygen & Medical Gases (D,E) - Red - Cylinder Cart
USA Safety Model#: GCMDE12RSC
Cylinder capacity: 12
Supported cylinder sizes: D, E (4.5" diameter)
Weight capacity: 2400 lbs
Cart dimensions (WxDxH):
29"w
x
17"d x 42"h
Oxygen Tank Cart Features:
Holds oxygen and other medical gas tanks
4 ultra-quiet 4" casters (2 rear swivel with break and 2 rigid casters)
Handle height is approximately 42"
5" square cylinder opening
Cylinders sit approximately 5.5" off of the ground
All welded steel construction
Welded steel supports
Powder coated red finish
1 Cylinder - 4 Wheels - Gas Cylinder Hand Truck
USA Safety Model#: HT903FS
Hand Truck capacity: 1 cylinder
Weight capacity: 700 lbs
Diameters supported: Up to 12"
Hand truck dimensions (WxDxH):
19"w
x
19"d x 47"h
Cylinder Hand Truck Features:
OSHA, NFPA (UFC) & CGA compliant
8" semi-pneumatic wheels
Swing-down steel carriages for use of rear swivel casters
3/16" steel supports and round steel tube
Constructed from 11 gauge HR steel
Polypropylene strap and cinch buckle
Hand truck made of fully welded construction
Quality powder-coat paint finish for long service life
Ships parcel at oversize rate
Industrial, medical and commercial use
Made in the USA
2 Cylinders - Flat Free Tires - Gas Cylinder Dolly
USA Safety Model#: HT952FFFS
Dolly capacity: 2 cylinders
Cylinder diameter: Up to 12"
Weight capacity: 500 lbs
Dolly dimensions (WxDxH):
35"w
x
20"d x 47"h
Cylinder Dolly Features:
OSHA, NFPA (UFC) & CGA compliant
10.5" urethane flat free tires
3/16" steel supports and round steel tube
Constructed from 11 and 10 gauge HR steel
Cylinder dolly has polypropylene strap and cinch buckle
Fully welded construction
Quality powder-coat paint finish for long service life
Made in the USA
24 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Cart
USA Safety Model#: GCMDE24SC
Cylinder capacity: 24
Supported cylinder sizes: D, E (4.5" diameter)
Weight capacity: 2400 lbs
Cart dimensions (WxDxH):
34"w
x
22"d x 35"h
Oxygen Tank Cart Features:
Holds oxygen and other medical gas tanks
4 ultra-quiet 4" casters (2 rear swivel with break and 2 rigid casters)
Handle height is approximately 35"
5" square cylinder opening
Cylinders sit approximately 5.5" off of the ground
All welded steel construction
Welded steel supports
Powder coated green finish
1 Cylinder - 4 Wheels - Heavy Duty - Gas Cylinder Hand Truck
USA Safety Model#: HT904FS
Hand truck capacity: 1 cylinder
Weight capacity: 880 lbs
Diameters supported: Up to 12"
Hand truck dimensions (WxDxH):
21"w
x
19"d x 47"h
Cylinder Hand Truck Features:
OSHA, NFPA (UFC) & CGA compliant
Swing-down steel carriages for use of rear swivel casters
Gas cylinder hand truck has 10.5 inch fully pneumatic wheels
3/16" steel supports and round steel tube
Cylinder hand truck is constructed from 11 gauge HR steel
Polypropylene strap and cinch buckle
Fully welded construction
Quality powder-coat paint finish for long service life
Ships UPS oversize rate
Industrial, medical and commercial use
Made in the USA
2 Cylinders - Heavy Duty - Gas Cylinder Dolly
USA Safety Model#: HT991FS
Dolly capacity: 2 cylinders
Cylinder diameter: Up to 12"
Weight capacity: 1,000 lbs
Dolly dimensions (WxDxH):
35"w
x
24"d x 47"h
Cylinder Dolly Features:
OSHA, NFPA (UFC) & CGA compliant
16" fully pneumatic wheels
3/16" steel supports and round steel tube
Constructed from 11 gauge HR steel
Polypropylene strap and cinch buckle
Fully welded construction
Quality powder-coat paint finish for long service life
Made in the USA
1 Cylinder - Hoist Hook - Heavy Duty - Gas Cylinder Dolly
USA Safety Model#: HT3502FS
Dolly capacity: 1 cylinder
Cylinder diameters supported: Up to 12" diameter
Lifting hook weight capacity: 300 lbs
Dolly dimensions (WxDxH):
21"w
x
19"d x 68"h
Cylinder Dolly Features:
Hook attachment for transport with hoist rigs
Clamping posts to secure cylinders at any angle
10.5" diameter four-ply fully pneumatic wheels
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder-paint painted for durability
Made in the USA using American steel and labor
1 Cylinder - Hoist Hook - Green - Gas Cylinder Dolly
USA Safety Model#: HT75010LESC
Dolly capacity: 1 cylinder
Diameters supported: Up to 9.5"
Weight capacity: 200 lbs
Lifting hook weight capacity: 1,000 lbs
Dolly dimensions (WxDxH):
19"w
x
11"d x 73.5"h
Cylinder Dolly Features:
OSHA, NFPA (UFC) & CGA compliant
Hoist hook to lift dolly with crane or other lifting device
Steel cage door secures cylinder on dolly
10" semi-pneumatic, hard-rubber wheels have steel hubs with ball bearings (wheel dimensions 10" x 2.75")
Continuous handle
Powder coated green for durability
Industrial, medical and commercial use
Made in the USA
2 Cylinders - Steering Casters - Heavy Duty - Green - Gas Cylinder Dolly
USA Safety Model#: HT751203RCSC
Dolly capacity: 2 cylinders
Diameters supported: Up to 9.5" each
Weight capacity: 600 lb
Dolly dimensions (WxDxH):
23"w
x
27"d x 48"h
Cylinder Dolly Features:
OSHA, NFPA (UFC) & CGA compliant
Constructed from steel with sturdy bracing
10" pneumatic wheels with steel hubs with ball bearings (10" x 4")
Front 3 Ply Rotacasters
Continuous handle
Chains to secure cylinders
Powder coated green
Industrial, medical and commercial use
Made in the USA
2 Cylinders - Rear Casters - Gas Cylinder Hand Truck
USA Safety Model#: HT953FS
Hand truck capacity: 2
Cylinder diameter: Up to 10"
Weight capacity: 1,000 lbs
Hand truck dimensions (WxDxH):
31.5"w
x
20"d x 47"h
Cylinder Hand Truck Features:
OSHA, NFPA (UFC) & CGA compliant
10.5" fully pneumatic wheels
Transport acetylene, argon, butane, carbon dioxide (CO2), helium, hydrogen and other gas cylinders
3" fold-away rear casters
3/16" steel supports and round steel tube
Constructed from 11 gauge HR steel
Polypropylene strap and cinch buckle
Fully welded construction
Quality powder-coat paint finish for long service life
Optional tool tray (Model # HT953TTFS ) available for purchase
Cylinder hand truck is made in the USA
Hand truck ships LTL Freight
1 Cylinder - 4 Wheels - Flat Free Tires - Gas Cylinder Hand Truck
USA Safety Model#: HT904FFFS
Hand truck capacity: 1 cylinder
Weight capacity: 600 lbs
Diameters supported: Up to 12"
Hand truck dimensions (WxDxH):
21"w
x
19"d x 47"h
Cylinder Hand Truck Features:
OSHA, NFPA (UFC) & CGA compliant
Swing-down steel carriages for use of rear swivel casters
Gas cylinder hand truck has 10.5 inch urethane filled flat free tires
3/16" steel supports and round steel tube
Cylinder hand truck is constructed from 11 gauge HR steel
Polypropylene strap and cinch buckle
Fully welded construction
Quality powder-coat paint finish for long service life
Ships UPS oversize rate
Industrial, medical and commercial use
Made in the USA
1 Cylinder - Stair Climber - Green - Gas Cylinder Dolly
USA Safety Model#: HT75010R3SC
Dolly capacity: 1 cylinder
Diameters supported: Up to 9.5"
Weight capacity: 400 lb
Stair Climbing Dolly dimensions (WxDxH):
19"w
x
11"d x 49"h
Cylinder Stair Climbing Hand Cart Features:
OSHA, NFPA (UFC) & CGA compliant
Stair-climbing rotacaster wheels
Constructed from steel with sturdy bracing
Continuous handle
Chains to secure cylinders
Powder coated for durability
Industrial, medical and commercial use
Made in the USA
2 Cylinders - Firewall - Narrow - Green - Welding Cart
USA Safety Model#: HT60010FWSC
Welding cart capacity: 2 cylinders
Cylinder diameters supported: Up to 7" (fuel) & 9.5" (oxygen)
Cylinder Carts dimensions (WxDxH):
20"w
x
30"d x 62"h
Cylinder Firewall Cart Features:
OSHA, NFPA (UFC) & CGA compliant
Firewall barrier (1-hour rating)
Tool tray for holding equipment
10" semi-pneumatic wheel with 5/8" ball bearings
Removable handle
Two chains to secure cylinders
Powder coated for durability
Made in the USA
Vertical Bulk Delivery - Oxygen & Medical Gases - Green - Cylinder Cart
USA Safety Model#: GCUWSC
Cylinder capacity: 64 size D or E cylinders (or equivalent combination of larger cylinders)
Supported cylinder sizes: Multiple
Cart dimensions (WxDxH):
40"w
x
27"d x 38"h
Oxygen Tank Cart Features:
Open top design
Holds oxygen and other medical gas tanks
6" bolt-on casters (2 swivel with brake and 2 rigid)
Includes one 48" ratchet strap with E-hook ends
Two levels of E Track inside
All welded steel construction (except casters)
Powder coated green finish
1 Cylinder - Large Cylinder - Gas Cylinder Dolly
USA Safety Model#: HT962FS
Dolly capacity: 1 cylinders
Cylinder diameter: 12" - 18"
Weight capacity: 880 lbs
Dolly dimensions (WxDxH):
35"w
x
24"d x 47"h
Cylinder Dolly Features:
OSHA, NFPA (UFC) & CGA compliant
10.5" fully pneumatic wheels
3/16" steel supports and round steel tube
Constructed from 11 gauge HR steel
Polypropylene strap and cinch buckle
Fully welded construction
Quality powder-coat paint finish for long service life
Designed to move 100# propane cylinder
Cylinder dolly ships LTL freight
Made in the USA
2 Cylinders - Flat Free Tires - Rear Casters - Gas Cylinder Hand Truck
USA Safety Model#: HT953FFFS
Hand truck capacity: 2
Cylinder diameter: Up to 10"
Weight capacity: 600 lbs
Hand truck dimensions (WxDxH):
31.5"w
x
20"d x 47"h
Cylinder Hand Truck Features:
OSHA, NFPA (UFC) & CGA compliant
10.5" flat free urethane filled wheels
Transport acetylene, argon, butane, carbon dioxide (CO2), helium, hydrogen and other gas cylinders
3" fold-away rear casters
3/16" steel supports and round steel tube
Constructed from 11 gauge HR steel
Polypropylene strap and cinch buckle
Fully welded construction
Quality powder-coat paint finish for long service life
Cylinder hand truck is made in the USA
2 Cylinders - Firewall - Heavy Duty - Tool Tray - Green - Welding Cart
USA Safety Model#: HT40216FWSC
Welding cart capacity: 2 cylinders
Cylinder diameters supported: Up to 12.5" (fuel) & 9.5" (oxygen)
Weight capacity: 780 lbs
Cylinder Carts dimensions (WxDxH):
35"w
x
21.5"d x 62"h
Cylinder Dolly Features:
OSHA, NFPA (UFC) & CGA compliant
Firewall barrier
Tool tray for holding equipment
16" pneumatic wheels with steel hubs and no-flat additive complete with 3/4" ball bearings (wheel dimensions 16" x 4")
Continuous handle
Chains to secure cylinders
Powder coated for durability
Made in the USA
36 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Cart
USA Safety Model#: GCMDE36SC
Cylinder capacity: 36
Supported cylinder sizes: D, E (4.5" diameter)
Weight capacity: 2400 lbs
Cart dimensions (WxDxH):
49"w
x
22"d x 38"h
Oxygen Tank Cart Features:
Holds oxygen and other medical gas tanks
4 ultra-quiet 4" casters (2 rear swivel with break and 2 rigid casters)
Handle height is approximately 38"
5" square cylinder opening
Cylinders sit approximately 5.5" off of the ground
All welded steel construction
Welded steel supports
Powder coated green finish
2 Cylinders - Heavy Duty - Rear Casters - Hand Truck
USA Safety Model#: HT973FS
Cart capacity: 2 cylinders
Cylinder diameters supported: Up to 12.25" (fuel) & 10" (oxygen)
Weight capacity: 1,000 lbs
Cart dimensions (WxDxH):
33.5"w
x
26.5"d x 49"h
Hand Truck Features:
OSHA, NFPA (UFC) & CGA compliant
16" diameter four-ply fully pneumatic speed rated wheels
5" diameter rear casters
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder-coat painted for durability
Optional tool tray (Model # HT953TTFS ) available for purchase
Made in the USA using American steel and labor
3 Cylinders - 4 wheels - Flat Free Tires - Green - Gas Cylinder Hand Truck
USA Safety Model#: HT751203RCLGFFSC
Dolly capacity: 3 tanks (9.5" diameter)
Diameters supported: Up to 16"
Weight capacity: 600 lb
Dolly dimensions (WxDxH):
23"w
x
32"d x 48"h
Cylinder Dolly Features:
Hold 1-3 high pressure cylinders (9.5" diameter)
OSHA, NFPA (UFC) & CGA compliant
Constructed from steel with sturdy bracing
10" foam filled tires (wheel dimensions 10" x 4")
Two chains included to secure cylinders
Powder coated for durability
Industrial, medical and commercial use
Made in the USA
1 Cylinder - Heavy Duty - Large Cylinder - Gas Cylinder Dolly
USA Safety Model#: HT961FS
Dolly capacity: 1 cylinders
Cylinder diameter: 12" - 18"
Weight capacity: 1,000 lbs
Dolly dimensions (WxDxH):
35"w
x
24"d x 47"h
Cylinder Dolly Features:
OSHA, NFPA (UFC) & CGA compliant
16" fully pneumatic wheels
3/16" steel supports and round steel tube
Constructed from 11 gauge HR steel
Polypropylene strap and cinch buckle
Fully welded construction
Quality powder-coat paint finish for long service life
Designed to move 100# propane cylinder
Cylinder dolly ships LTL freight
Made in the USA
1 Cylinder - Hoist Hook - Flat Free Tires - Gas Cylinder Dolly
USA Safety Model#: HT3502FFFS
Dolly capacity: 1 cylinder
Cylinder diameters supported: Up to 12" diameter
Lifting hook weight capacity: 300 lbs
Dolly dimensions (WxDxH):
21"w
x
19"d x 68"h
Cylinder Dolly Features:
Hook attachment for transport with hoist rigs
Clamping posts to secure cylinders at any angle
10.5" diameter flat free urethane filled wheels
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder-coat painted for durability
Made in the USA using American steel and labor
1 Cylinder - Caddy(tm) - Flat Free Tires - Gas Cylinder Lifting Hand Truck
USA Safety Model#: HT2000FFFS
Caddy capacity: 1 cylinder
Weight capacity: 500 lbs
Diameters supported: Up to 12"
Product dimensions (WxDxH):
32"w
x
30"d x 48"h
Cylinder Caddy Features:
OSHA, NFPA (UFC) & CGA compliant
Lift & transport cylinders to install on welding carts, platforms & pallets
11" manual lift
10.5" urethane filled flat free tires
Rear swivel casters to allow cart to move on 4 wheels
Minimum recommended cylinder height is 40"
Fully welded construction
Quality powder-coat paint finish for long service life
Gas caddy ships UPS double oversize rate
Industrial, medical and commercial use
Patented
Made in the USA
2 Cylinders - Firewall - Hoist Hook - Heavy Duty - Green - Welding Cart
USA Safety Model#: HT55216FWSC
Welding cart capacity: 2 cylinders
Cylinder diameters supported: Up to 12.5" (fuel) & 9.5" (oxygen)
Lifting Eye Weight capacity: 1,000 lbs
Cylinder Carts dimensions (WxDxH):
35"w
x
29"d x 62"h
Cylinder Dolly Features:
OSHA, NFPA (UFC) & CGA compliant
Firewall barrier
Locking toolbox for holding equipment (lock not included)
1,000 lb lifting eye
Hose wrap arms on frame
16" pneumatic wheels with steel hubs and no-flat additive complete with 3/4" ball bearings (wheel dimensions 16" x 4")
Continuous handle
Two 1/4" steel perma clamps to secure cylinders
Powder coated for durability
Made in the USA
2 Cylinders or 1 Dewar - 3 Wheels - Gas Cylinder Dolly
USA Safety Model#: HT73012SC
Capacity: 1 cylinder
Cylinder diameters supported:
2 tanks - 9" diameter per tank
1 tank - 20" diameter (180 Liter)
Weight capacity: 1,500 lbs
Cart dimensions (WxDxH):
32"w
x
15"d x 53"h
Cart Features:
Multipurpose dolly
Tilt-back cylinder transport
Two 12" bolt-together, 4-ply pneumatic wheels (12"x4")
One rear 10" swivel caster wheel (10"x2")
Includes 4ft D-Ring ratchet strap
Durable powder-coated, green finish
Industrial, medical and commercial use
Made in the USA
50 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Cart
USA Safety Model#: GCMDE50VSC
Cylinder capacity: 50
Supported cylinder sizes: D, E (4.5" diameter)
Weight capacity: 2400 lbs
Cart dimensions (WxDxH):
27"w
x
57.5"d x 38"h
Oxygen Tank Cart Features:
Holds oxygen and other medical gas tanks
Six ultra-quiet 4" casters (front and rear casters swivel with break)
Handle height is approximately 38"
5" square cylinder opening
Cylinders sit approximately 5.5" off of the ground
All welded steel construction
Welded steel supports
Powder coated green finish
1 Cryogenic Tank (20" Dewar) - Gas Cylinder Dolly
USA Safety Model#: GC210131WC
Capacity: 1 cylinder
Cylinder diameters supported: 20" (160, 180, 200 Liter)
Weight capacity: 1,000 lbs
Cart dimensions (WxDxH):
30"w
x
31"d x 48 5/8"h
Cart Features:
Low profile design for easier loading and unloading
Made from heavy duty structural steel and schedule 40 pipe
Cylinder remains vertical during transport
Two 10" wheels and one 8" wheel with rolling and swivel lock
Chain to secure cylinder to cart
Durable powder coated finish
Industrial, medical and commercial use
Made in the USA
2 Cylinders - Firewall - Hoist Hook - Narrow - Green - Welding Cart
USA Safety Model#: HT60010FWLESC
Welding cart capacity: 2 cylinders
Cylinder diameters supported: Up to 7" (fuel) & 9.5" (oxygen)
Lifting hook weight capacity: 1,000 lbs
Cylinder Carts dimensions (WxDxH):
20"w
x
30"d x 62"h
Cylinder Firewall Cart Features:
OSHA, NFPA (UFC) & CGA compliant
Firewall barrier (1-hour rating)
Lifting Eye
Hose wrap arms on frame
Tool tray for holding equipment
10" semi-pneumatic wheel with 5/8" ball bearings
Removable handle
Two chains to secure cylinders
Powder coated for durability
Made in the USA
1 Cylinder - Caddy(tm) Gas Cylinder Lifting Hand Truck
USA Safety Model#: HT2000FS
Caddy capacity: 1 cylinder
Weight capacity: 1,000 lbs
Diameters supported: Up to 12"
Caddy dimensions (WxDxH):
22"w
x
20"d x 54"h
Cylinder Caddy Features:
OSHA, NFPA (UFC) & CGA compliant
Lift & transport cylinders to install on welding carts, platforms & pallets
11" manual lift
Fully pneumatic wheels
Rear swivel casters to allow cart to move on 4 wheels
Minimum recommended cylinder height is 40"
Fully welded construction
Quality powder-coat paint finish for long service life
Gas caddy ships UPS double oversize rate
Industrial, medical and commercial use
Patented
Made in the USA
4 Cylinders - Heavy Duty - Gas Cylinder Cart
USA Safety Model#: GC430FS
Cart capacity: 1-4 cylinders
Weight capacity: 1,600 lbs.
Cylinder diameter: Up to 12"
Cart dimensions (WxDxH):
40"w
x
24"d x 31"h
Gas Cylinder Cart Features:
OSHA, NFPA (UFC) & CGA compliant
Two 4" locking swivel casters and two rigid casters
3/16" steel supports and round steel tube
Constructed from 11 gauge HR steel
1.5" polypropylene straps and cinch buckles
Clearance from baseplate to ground is just under 3/4"
Baseplate has a beveled edge
Fully welded construction
A chain set (Model # GB105FS ) can be added to this product (optional)
For industrial & commercial use
Quality powder paint finish for long service life
Minor assembly required (casters and handle)
Made in the USA
2 Cylinders - Hoist Hook - Flat Free Tires - Gas Cylinder Hand Truck
USA Safety Model#: HT3552FFFS
Hand truck capacity: 2
Cylinder diameters supported: Up to 12" diameter
Weight capacity: 600 lbs
Hand truck dimensions (WxDxH):
32"w
x
20"d x 71"h
Cylinder Hand Truck Features:
Hook attachment for transport with hoist rigs
Clamping posts to secure cylinders at any angle
10.5" diameter flat free urethane filled wheels
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder-coat painted for durability
Made in the USA using American steel and labor
1 Cylinder - Green - Gas Cylinder Lifting Hand Truck
USA Safety Model#: HTJC10SC
Dolly capacity: 1 cylinder
Diameters supported: Up to 9.5"
Weight capacity: 400 lb
Dolly dimensions (WxDxH):
14"w
x
20"d x 47.5"h
Cylinder Dolly Features:
OSHA, NFPA (UFC) & CGA compliant
Lifts cylinder 10" above floor
Constructed from steel with sturdy bracing
10" semi-pneumatic wheels with steel hubs with ball bearings (10" x 2.75")
Continuous handle
2 straps to secure cylinder
Green powder coat for durability
Industrial, medical and commercial use
Made in the USA
1 Cryogenic Tank (20" Dewar) - Green - Gas Cylinder Dolly
USA Safety Model#: GCEZL4LSC
Capacity: 1 cylinder
Cylinder diameters supported: 20" (160,180, 200 Liter)
Weight capacity: 1,200 lbs
Cart dimensions (WxDxH):
28"w
x
32"d x 41.5"h
Cryogenic Tank Cart Features:
Low profile design for easier tank loading and unloading
Vertical cylinder transport
Two 10" wheels with aluminum hub (10"x2.5")
One rear 6" caster wheel with brake (6"x2")
Chain to secure cylinder to cart
Durable powder green coated finish
Industrial, medical and commercial use
Made in the USA
2 Cylinders - Steel Wheels - Welding Cart
USA Safety Model#: HT987FS
Welding cart capacity: 2 cylinders
Cylinder diameter: Up to 12.375"
Welding cart dimensions (WxDxH):
31"w
x
26"d x 47"h
Cylinder Torch Cart Features:
OSHA, NFPA (UFC) & CGA compliant
For use in industrial and welding environments
20" welded steel wheels
Specially configured to use with fuel/oxygen bottle combinations
3/16" steel supports and round steel tube
Constructed from 11 gauge HR steel
Polypropylene strap and cinch buckle
Cylinder cart has fully welded construction
Quality powder-coat paint finish for long service life
Made in the USA
2 Cylinders - Hoist Hook - Gas Cylinder Hand Truck
USA Safety Model#: HT3552FS
Hand truck capacity: 2
Cylinder diameters supported: Up to 12" diameter
Weight capacity: 600 lbs
Hand truck dimensions (WxDxH):
32"w
x
20"d x 71"h
Cylinder Hand Truck Features:
Hook attachment for transport with hoist rigs
Clamping posts to secure cylinders at any angle
10.5" diameter four-ply fully pneumatic wheels
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder-coat painted for durability
Made in the USA using American steel and labor
1 Cylinder - Large Cylinder - Flat Free Tires - Gas Cylinder Dolly
USA Safety Model#: HT962FFFS
Dolly capacity: 1 cylinders
Cylinder diameter: 12" - 18"
Weight capacity: 500 lbs
Dolly dimensions (WxDxH):
35"w
x
24"d x 47"h
Cylinder Dolly Features:
OSHA, NFPA (UFC) & CGA compliant
10" flat-free urethane filled solid tires
3/16" steel supports and round steel tube
Constructed from 11 gauge HR steel
Polypropylene strap and cinch buckle
Fully welded construction
Quality powder-coat paint finish for long service life
Designed to move 100# propane cylinder
Cylinder dolly ships LTL freight
Made in the USA
6 Cylinders - Heavy Duty - Gas Cylinder Cart
USA Safety Model#: GC630FS
Cart capacity: 1-6 cylinders
Weight capacity: 2,000 lbs.
Cylinder diameter: Up to 12"
Cart dimensions (WxDxH):
52"w
x
24"d x 30"h
Gas Cylinder Cart Features:
OSHA, NFPA (UFC) & CGA compliant
Two 4" locking swivel casters and two 4" rigid casters
3/16" steel supports and round steel tube
Constructed from 11 gauge HR steel
1.5" polypropylene straps and cinch buckles
Clearance from baseplate to ground is just under 3/4"
Baseplate has a beveled edge
Fully welded construction
For industrial & commercial use
Quality powder paint finish for long service life
A chain set (Model # GB105FS ) can be added to this product (optional)
Minor assembly required (casters and handle)
Made in the USA
2 Cylinders - Firewall - Hoist Hook - Large Fuel Cylinder - Green - Welding Cart
USA Safety Model#: HT55216FWPSC
Welding cart capacity: 2 cylinders
Cylinder diameters supported: Up to 15.5" (fuel) & 9.5" (oxygen)
Lifting eye weight capacity: 1,000 lbs
Cylinder Carts dimensions (WxDxH):
39"w
x
28"d x 65.5"h
Cylinder Firewall Cart Features:
OSHA, NFPA (UFC) & CGA compliant
Firewall barrier
Locking toolbox for holding equipment (lock not included)
1,000 lb rated lifting eye for transport by hoist hook
Hose wrap arms on frame
16" pneumatic wheels with steel hubs and no-flat additive complete with 3/4" ball bearings (wheel dimensions 16" x 4")
Continuous handle
Two 1/4" steel perma-clamps to secure cylinders
Powder coated for durability
Made in the USA
2 Cylinders - Hoist Hook - Flat Free Tires - Rear Casters - Gas Cylinder Hand Truck
USA Safety Model#: HT3553FFFS
Hand truck capacity: 2
Cylinder diameters supported: Up to 12" diameter
Lifting hook weight capacity: 600 lbs
Hand truck dimensions (WxDxH):
32"w
x
20"d x 68"h
Cylinder Hand Truck Features:
Hook attachment for transport with hoist rigs
Clamping posts to secure cylinders at any angle
10.5" diameter flat free urethane filled tires
3" diameter rear casters
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder-coat painted for durability
Made in the USA using American steel and labor
2 Cylinders - Hoist Hook - Rear Casters - Gas Cylinder Hand Truck
USA Safety Model#: HT3553FS
Hand truck capacity: 2
Cylinder diameters supported: Up to 12" diameter
Lifting hook weight capacity: 600 lbs
Hand truck dimensions (WxDxH):
32"w
x
20"d x 68"h
Cylinder Hand Truck Features:
Hook attachment for transport with hoist rigs
Clamping posts to secure cylinders at any angle
10.5" diameter four-ply fully pneumatic wheels
3" diameter rear casters
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder-coat painted for durability
Made in the USA using American steel and labor
2 Cylinders - Hoist Hook - Flat Free Tires - Rear Casters - Tool Tray - Gas Cylinder Hand Truck
USA Safety Model#: HT3549FFFS
Hand truck capacity: 2
Cylinder diameters supported: Up to 12" diameter
Lifting hook weight capacity: 600 lbs
Hand truck dimensions (WxDxH):
32"w
x
20"d x 68"h
Cylinder hand truck Features:
Hook attachment for transport with hoist rigs
Clamping posts to secure cylinders at any angle
10.5" diameter flat free urethane filled tires
Includes tray to hold torch/tools
3" diameter rear casters
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety 54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder-coat painted for durability
Made in the USA using American steel and labor
2 Cylinders - Firewall - Flat Free Tires - Welding Cart
USA Safety Model#: HT3952FFFS
Welding cart capacity: 2 cylinders
Cylinder diameters supported: Up to 12.5" (fuel) & 10" (oxygen)
Weight capacity: 600 lbs
Welding cart dimensions (WxDxH):
32"w
x
24"d x 60"h
Cylinder Torch Cart Features:
10.5" diameter flat free urethane filled wheels
1" thick Marinite I™ lab certified fire barrier material encased in steel plate shell
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Cylinder firewall cart is powder-coat painted for durability
Made in the USA using American steel and labor
2 Cylinders - Hoist Hook - Rear Casters - Tool Tray - Gas Cylinder Hand Truck
USA Safety Model#: HT3549FS
Hand truck capacity: 2
Cylinder diameters supported: Up to 12" diameter
Lifting hook weight capacity: 600 lbs
Hand truck dimensions (WxDxH):
32"w
x
20"d x 68"h
Cylinder hand truck Features:
Hook attachment for transport with hoist rigs
Clamping posts to secure cylinders at any angle
10.5" diameter four-ply fully pneumatic wheels
Includes tray to hold torch/tools
3" diameter rear casters
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder-coat painted for durability
Made in the USA using American steel and labor
4 Propane (33-43lb) or 6 High Pressure Gas Tanks - Forkliftable - Low Profile Floor - Gas Cylinder Cart
USA Safety Model#: GC4FL6HPAM
Cart capacity: Supports either -
-4 propane cylinders (26.5" tall forklift tanks), or
-6 high pressure cylinders
Cylinder diameters: 9" - 12.5"
Cart dimensions (WxDxH):
36"w
x
39"d x 44"h
Gas Cylinder Cart Features:
OSHA, NFPA (UFC) & CGA compliant
Two 4" swivel casters and two rigid casters
Forklift pockets
Constructed from steel
5,000 lb ratchet strap to secure cylinders
Low profile platform for easy tilt-n-roll loading and unloading
For industrial & commercial use
Quality electrostatic powder paint finish for long service life
Minor assembly required (casters and support bar)
Made in the USA
2 Cylinders - Firewall - Welding Cart
USA Safety Model#: HT3952FS
Welding cart capacity: 2 cylinders
Cylinder diameters supported: Up to 12.5" (fuel) & 10" (oxygen)
Weight capacity: 700 lbs
Welding cart dimensions (WxDxH):
32"w
x
24"d x 60"h
Cylinder Torch Cart Features:
10.5" diameter four-ply fully pneumatic wheels
1" thick Marinite I™ lab certified fire barrier material encased in steel plate shell
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Cylinder firewall cart is powder-coat painted for durability
Made in the USA using American steel and labor
2 Cylinders - Hoist Hook - Heavy Duty - Gas Cylinder Dolly
USA Safety Model#: HT3591FS
Dolly capacity: 2 cylinders
Cylinder diameters supported: Up to 12" diameter
Lifting hook weight capacity: 600 lbs
Dolly dimensions (WxDxH):
35"w
x
24"d x 68"h
Cylinder Dolly Features:
Hook attachment for transport with hoist rigs
Clamping posts to secure cylinders at any angle
16" diameter four-ply fully pneumatic speed rated wheels
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder-coat painted for durability
Made in the USA using American steel and labor
6 Cylinders - Hoist Hook & Lifting Eyes - Forkliftable - Casters - Cylinder Cradle Cart
USA Safety Model#: CCC64CSC
Cylinder capacity: 6
Supported cylinder sizes: 9.5" diameter (200-300 cu ft)
Weight capacity: 1,950 lbs
Cart dimensions (WxDxH):
32"w
x
22"d x 79"h
Tank Cradle Cart Features:
Holds up to 6 cylinders of up to 9.5" in diameter
Security bars bolt to frame to secure cylinders
4 steel caster wheels (6")
4 lifting eyes and center hoist hook
Top forklift pockets
Lower two-way forklift pockets
3/16" steel floor plate
Finished with 5 stage powder coat, black
Industrial and commercial use
Outdoor or indoor use
Made in the USA
1 Cryogenic Tank (20" Dewar) - Wide - Positioning Wheels - Tilt Hook - Gas Cylinder Dolly
USA Safety Model#: GCLCT126WSC
Capacity: 1 cylinder
Cylinder diameters supported: 20" (160, 180, 200 Liter)
Weight capacity: 900 lbs
Cart dimensions (WxDxH):
26"w
x
25"d x 63"h
Cart Features:
Wide design for more stable transport
4 wheels allows the cylinder to be easily moved
Two 12" pneumatic wheels (12"x4")
Two 6" swivel casters (6"x2")
Two small positioning wheels (5"x2")
Heavy duty steel cylinder lift hook
Durable powder coated finish
Industrial, medical and commercial use
Use with gases like oxygen, nitrogen, carbon dioxide, argon
Made in the USA
2 Cylinders - Firewall - Heavy Duty - Welding Cart
USA Safety Model#: HT3901FS
Welding cart capacity: 2 cylinders
Cylinder diameters supported: Up to 12.5" (fuel) & 10" (oxygen)
Weight capacity: 1,000 lbs
Welding cart dimensions (WxDxH):
35"w
x
24"d x 60"h
Torch Cart Features:
16" diameter four-ply fully pneumatic speed rated wheels
1" thick Marinite I™ lab certified fire barrier material encased in steel plate shell
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
Gas torch cart built of 14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder-paint painted for durability
Made in the USA using American steel and labor
6 Cylinders - Hoist Hook & Lifting Eyes - Forkliftable - In-Line Casters - Cylinder Cradle Cart
USA Safety Model#: CCC66CHSC
Cylinder capacity: 6
Supported cylinder sizes: 9.5" diameter (200-300 cu ft)
Weight capacity: 1,950 lbs
Cart dimensions (WxDxH):
32"w
x
22"d x 79"h
Tank Cradle Cart Features:
Holds up to 6 cylinders up to 9.5" in diameter
Security bars bolt to frame to secure cylinders
6 frame-inset caster wheels
4 lifting eyes and center hoist hook
Top forklift pockets
Lower two-way forklift pockets
3/16" steel floor plate
Finished with 5 stage powder coat, black
Industrial and commercial use
Outdoor or indoor use
Made in the USA
6 Propane (33-43lb) or 8 High Pressure Gas Tanks - Forkliftable - Low Profile Floor - Gas Cylinder Cart
USA Safety Model#: GC6FL8HPAM
Cart capacity: Supports either -
-6 propane cylinders (26.5" tall forklift tanks), or
-8 high pressure cylinders
Cylinder diameters: 9" - 12.5"
Cart dimensions (WxDxH):
45"w
x
39"d x 44"h
Gas Cylinder Cart Features:
OSHA and NFPA compliant
Two 4" swivel casters and two rigid casters
Forklift pockets
Constructed from steel
5,000 lb ratchet strap to secure cylinders
Low profile platform for easy tilt-n-roll loading and unloading
For industrial & commercial use
Quality electrostatic powder paint finish for long service life
Minor assembly required (casters and support bar)
Made in the USA
6 Cylinders - Hoist Hook & Lifting Eyes - Forkliftable - Low Profile - Cylinder Cradle Cart
USA Safety Model#: CCC66CLPSC
Cylinder capacity: 6
Supported cylinder sizes: 9.5" diameter (200-300 cu ft)
Weight capacity: 1,950 lbs
Cart dimensions (WxDxH):
34"w
x
32"d x 78"h
Tank Cradle Cart Features:
Holds up to 6 cylinders of up to 9.5" in diameter
Security bars bolt to frame to secure cylinders
Low-profile platform design
Fiberglass and nylon fixed caster wheels
4 lifting eyes and center hoist hook
Lower two-way forklift pockets
3/16" steel floor plate
Finished with 5 stage powder coat, black
Industrial and commercial use
Outdoor or indoor use
Made in the USA
6 Cylinders - Green - Gas Cylinder Cart
USA Safety Model#: GCCT6SC
Capacity: 6 cylinder
Cylinder diameters supported: 9"
Weight capacity: 1,400 lbs
Cart dimensions (WxDxH):
47"w
x
25"d x 34"h
Cart Features:
Low profile design for easier tank loading and unloading (2" height)
Vertical cylinder transport
Four 6" caster wheels, 2 are locking
Chains to secure cylinder to cart
Durable powder green coated finish
Industrial, medical and commercial use
Made in the USA
2 Cylinders - Hoist Hook - Steel Wheels - Gas Cylinder Dolly
USA Safety Model#: HT3587FS
Dolly capacity: 2
Cylinder diameters supported: Up to 12" diameter
Lifting hook weight capacity: 600 lbs
Dolly dimensions (WxDxH):
31"w
x
26"d x 68"h
Cylinder Dolly Features:
Hook attachment for transport with hoist rigs
Clamping posts to secure cylinders at any angle
20" diameter steel main all-surface wheels
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder-coat painted for durability
Made in the USA using American steel and labor
2 Cylinders - Firewall - Rear Casters - Welding Cart
USA Safety Model#: HT3973FS
Welding cart capacity: 2 cylinders
Cylinder diameters supported: Up to 12.5" (fuel) & 10" (oxygen)
Weight capacity: 1,000 lbs
Welding cart dimensions (WxDxH):
35"w
x
24"d x 61"h
Firewall Torch Cart Features:
16" diameter four-ply fully pneumatic speed rated wheels
1" thick Marinite I™ lab certified fire barrier material encased in steel plate shell
5" diameter rear casters
Welding cart is UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder-coat painted for durability
Made in the USA using American steel and labor
1 Cylinder - Manual Winch - Gas Cylinder Lift Truck
USA Safety Model#: GC260163WC
Capacity: 1 cylinder
Weight capacity: 300 lbs
Cylinder diameters supported: Up to 9.5"
Cart dimensions (WxDxH):
20"w
x
29-1/4"d x 58"h
Cart Features:
Manual winch with auto-brake feature
Lifts cylinder up to 40"
Platform in lowered position is 1/4" from ground
With winch handle in use overall depth is 33"
Four 5" wheels, two locking swivel
Platform dimension: 12"Wx20"D
Chains to secure cylinder
Industrial, medical and commercial use
Made in the USA
2 Cylinders - Firewall - Steel Wheels - Welding Cart
USA Safety Model#: HT3987FS
Welding cart capacity: 2 cylinders
Cylinder diameters supported: Up to 12.5" (fuel) & 10" (oxygen)
Weight capacity: 700 lbs
Welding cart dimensions (WxDxH):
32"w
x
26"d x 60"h
Cylinder Torch Cart Features:
20" diameter steel main all-surface wheels
1" thick Marinite I™ lab certified fire barrier material encased in steel plate shell
UFC, NFPA, CGA, & OSHA compliant
Firewall cart includes dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder-coat painted for durability
Made in the USA using American steel and labor
12 Cylinders - Hoist Hook & Lifting Eyes - Forkliftable - In-Line Casters - Cylinder Cradle Cart
USA Safety Model#: CCC126CHSC
Cylinder capacity: 12
Supported cylinder sizes: 9.5" diameter (200-300 cu ft)
Weight capacity: 2,950 lbs
Cart dimensions (WxDxH):
42"w
x
32"d x 79"h
Tank Cradle Cart Features:
Holds up to 12 cylinders up to 9.5" in diameter
Security bars bolt to frame to secure cylinders
6 frame-inset caster wheels
4 lifting eyes and center hoist hook
Top four-way forklift pockets
Lower two-way forklift pockets
3/16" steel floor plate
Finished with 5 stage powder coat, black
Industrial and commercial use
Outdoor or indoor use
Made in the USA
8 Cylinders - Green - Gas Cylinder Cart
USA Safety Model#: GCCT8SC
Capacity: 8 cylinder
Cylinder diameters supported: 9"
Weight capacity: 1,400 lbs
Cart dimensions (WxDxH):
57"w
x
25"d x 34"h
Cart Features:
Low profile design for easier tank loading and unloading (2" height)
Vertical cylinder transport
Four 6" caster wheels, 2 are locking
Chains to secure cylinder to cart
Durable green powder coated finish
Industrial, medical and commercial use
Made in the USA
1 Cryogenic Tank (26" Dewar) - Positioning Wheels - Tilt Hook - Gas Cylinder Dolly
USA Safety Model#: GCLCT1226SC
Capacity: 1 cylinder
Cylinder diameters supported: 26" (230 Liter)
Weight capacity: 1,000 lbs
Cart dimensions (WxDxH):
23"w
x
25"d x 63"h
Cart Features:
Compact design for easier access to tight areas
4 wheels allows the cylinder to be easily moved
Two 12" pneumatic wheels (12"x4")
Two 6" swivel casters (6"x2")
Two small positioning wheels (5"x2")
Heavy duty steel cylinder lift hook
Durable powder coated finish
Industrial, medical and commercial use
Use with large industrial size dewars (26" diameter)
Made in the USA
2 Cylinders - Firewall - Hoist Hook - Heavy Duty - Welding Cart
USA Safety Model#: HT3991FS
Welding cart capacity: 2 cylinders
Cylinder diameters supported: Up to 12.5" (fuel) & 10" (oxygen)
Weight capacity: 1,000 lbs
Welding cart dimensions (WxDxH):
35"w
x
24"d x 64"h
Firewall Welding Cart Features:
Hook attachment for transport with hoist rigs
Clamping posts to secure cylinders at any angle
16" diameter four-ply fully pneumatic speed rated wheels
1" thick Marinite I™ lab certified fire barrier material encased in steel plate shell
Includes tray to hold torch/tools
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
Welding cart with firewall has 14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder-coat painted for durability
Made in the USA using American steel and labor
1 Cylinder - Hydraulic Pump - Gas Cylinder Lift Truck
USA Safety Model#: GC260161WC
Capacity: 1 cylinder
Cylinder diameters supported: Up to 9.5"
Weight capacity: 300 lbs
Cart dimensions (WxDxH):
20"w
x
29-1/4"d x 54"h
Cart Features:
Foot operated hydraulic pump to lift cylinder off ground
Lifts cylinder up to 40"
Platform in lowered position is 1/4" from ground
With jack pedal in use overall depth is 40"
Four 5" wheels, two locking swivel
Chain to secure cylinder
Industrial, medical and commercial use
Made in the USA
2 Cylinders - Firewall - Hoist Hook - Steel Wheels - Welding Cart
USA Safety Model#: HT3989FS
Welding cart capacity: 2 cylinders
Cylinder diameters supported: Up to 12.5" (fuel) & 10" (oxygen)
Weight capacity: 700 lbs
Welding cart dimensions (WxDxH):
32"w
x
26"d x 64"h
Cylinder Torch Cart Features:
Hook attachment for transport with hoist rigs
Welding cart with firewall has clamping posts to secure cylinders at any angle
20" diameter steel main all-surface wheels
1" thick Marinite I™ lab certified fire barrier material encased in steel plate shell
Includes tray to hold torch/tools
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder-coat painted for durability
Made in the USA using American steel and labor
2 Cylinders - Firewall - Hoist Hook - Rear Casters - Heavy Duty - Welding Cart
USA Safety Model#: HT3993FS
Welding cart capacity: 2 cylinders
Cylinder diameters supported: Up to 12.5" (fuel) & 10" (oxygen)
Weight capacity: 1,000 lbs
Welding cart dimensions (WxDxH):
35"w
x
24"d x 64"h
Firewall Welding Cart Features:
Hook attachment for transport with hoist rigs
Clamping posts to secure cylinders at any angle
16" diameter four-ply fully pneumatic speed rated wheels
1" thick Marinite I™ lab certified fire barrier material encased in steel plate shell
5" diameter rear casters
Includes locking lid tool tray to hold torch/tools
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
Welding cart with firewall has 14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder-coat painted for durability
Made in the USA using American steel and labor
1 Cryogenic Tank (20" Dewar) - Powered Gas Cylinder Dolly
USA Safety Model#: GC210131PDWC
Capacity: 1 cylinder
Cylinder diameters supported: 20" (160, 180, 200 Liter)
Weight capacity: 1,000 lbs
Cart dimensions (WxDxH):
28"w
x
40"d x 49"h
Cryogenic Tank Cart Features:
Battery-powered drive rear wheel
Max speed with full charge 1.7 mph (2.5 fps) (no load)
Speed control is adjustable from 0 to 1.7 mph
5 mile range
Automatic Dead Man Break engages if handle is released
Automatic emergency safety switch instantly reverses direction if bumped
Low profile design for easier loading and unloading
Made from heavy duty structural steel and schedule 40 pipe
Cylinder remains vertical during transport
Two 10" polyurethane wheels on front
Quick release nylon ratchet strap to secure cylinder to cart
Durable powder coated finish
Industrial, medical and commercial use
Made in the USA
6 Cylinder - Propane Tank Mover & Lifter for Forklifts
USA Safety Model#: TTLP6VT
Cart capacity: 6 propane tanks
Weight capacity: 450 lbs
Diameter supported: 12-1/2" (33# propane tank)
Cart dimensions (WxDxH):
33-1/4"w
x
72"d x 78"h
Tank Mover & Lifter Features:
Holds 6 propane tanks (33# size), 2 vertical & 4 horizontal
Steel construction
Built-in crane for loading and unloading propane cylinder on the fork lift
Crane has 360 degree rotation
Manual hand pump hydraulic lift mechanism
Two rigid and two swivel casters
Floor lock to immobilize the cart
Made in the USA
1 Cryogenic Tank (20" Dewar) - Positioning Wheels - Tilt Hook - Gas Cylinder Dolly
USA Safety Model#: GCLCT126SC
Capacity: 1 cylinder
Cylinder diameters supported: 20" (160, 180, 200 Liter)
Weight capacity: 900 lbs
Cart dimensions (WxDxH):
20"w
x
25"d x 63"h
Cart Features:
Narrow design for easier access to tight areas
4 wheels allows the cylinder to be easily moved
Two 12" pneumatic wheels (12"x4")
Two 6" swivel casters (6"x2")
Two small positioning wheels (5"x2")
Heavy duty steel cylinder lift hook
Durable powder coated finish
Industrial, medical and commercial use
Use with gases like oxygen, nitrogen, carbon dioxide, argon
Made in the USA
1 Cryogenic Tank (20" Dewar) - Hydraulic Pump - Gas Cylinder Lift Truck
USA Safety Model#: GC240250WC
Capacity: 1 cylinder
Weight capacity: 1,000 lbs
Cylinder diameters supported: Maximum of 20" (160, 180, 200 Liter)
Cart dimensions (WxDxH):
29-3/4"w
x
44-3/4"d x 66-1/4"h
Cart Features:
Foot operated hydraulic pump to lift cylinder off ground
Lifts tank from 54" (lowered hook) to 71"H (raised hook)
Made from heavy duty structural steel and schedule 40 pipe
Cylinder remains vertical during transport
Two 10" wheels and one 8" wheel with swivel lock
2" polyester web ratchet tightening belt to secure cylinder
Industrial, medical and commercial use
Made in the USA
1 Cryogenic Tank (20" Dewar) - Hydraulic Pump - Hand Brake - Gas Cylinder Lift Truck
USA Safety Model#: GC240251WC
Capacity: 1 cylinder
Weight capacity: 1,000 lbs
Cylinder diameters supported: Up to 20" (160, 180, 200 Liter)
Cart dimensions (WxDxH):
29-3/4"w
x
44-3/4"d x 66-1/4"h
Cart Features:
Foot operated hydraulic pump to lift cylinder off ground
Lifts tank from 54" (lowered hook) to 71"H (raised hook)
Hand controlled brakes
Made from heavy duty structural steel and Schedule 40 pipe
Cylinder remains vertical during transport
Two rigid 10"x2.5" polyurethane wheels and one 8"x2" caster with swivel lock
2" Ratchet tightening belt to secure cylinder
Industrial, medical and commercial use
Made in the USA