Skip to Content
The store will not work correctly when cookies are disabled.
8-11 Cylinder Capacity - Cylinder Racks and Stands
-
8 Propane Tanks (33 LB) - Outdoor - Horizontal Storage - Steel - Gas Cylinder Rack
USA Safety Model#: GR08202MAAM
Rack capacity: 8 cylinders (33 lb) of 12.5" diameter
Propane Tank Rack dimensions (WxDxH):
30"w
x
27"d x 50"h
Gas Cylinder Rack Features:
- Frame and shelf made from galvannealed steel
- Pre-drilled holes (13/16") for anchoring each foot pad
- Unit is powder coated with outdoor grade paint for extra durability
- Ships assembled ready for use
- Product bolts together and can be disassembled
- Made in the USA
-
8 Cylinders - Basic - Gas Cylinder Rack
USA Safety Model#: GRCR8SC
Cylinder capacity: 8
Cylinder diameters supported: Up to 9.5"
Cylinder rack dimensions (WxDxH):
44.5"w
x
21.5"d x 36.25"h
Cylinder Storage Rack Features:
- Fully welded 1.5" steel tube
- Holds up to 8 cylinders up to 9.5" in diameter
- Two chains included
- Pre-drilled 0.5" floor mounting holes on flat iron base
- Finished with black powder paint
- Industrial and commercial use
- Made in the USA
-
8 Cylinders - Gas Cylinder Stand
USA Safety Model#: GR800FS
Stand capacity: 1-8 cylinders
Diameters supported: Up to 12"
Stand dimensions (WxDxH):
56"w
x
23"d x 30"h
Gas Cylinder Stand Features:
- OSHA, NFPA (UFC) & CGA compliant
- 1.5" Polypropylene strap and cinch buckle
- Fully welded construction
- Quality powder-coat paint finish for long service life
- Steel reinforced vinyl edge guards protect equipment
- Constructed from 11 gauge and heavier plate steel
- Designed to mount to floor with four fasteners
- A chain set (Model # GB105FS) can be added to this product (optional)
- Process control version also available
- Industrial and commercial use
- Made in the USA
-
8 Cylinders (2x4) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR2X4FS
Cylinder capacity: 1-8
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
30"w
x
50"d x 30"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square steel tube continuously seam welded, 0.125" thick
- Two levels of welded steel chains
- Holds eight cylinders, two wide by four deep
- Snaps for each cylinder
- 6 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
8 Cylinders (4x2) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR4X2FS
Cylinder capacity: 1-8
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
58"w
x
26"d x 30"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds eight cylinders, four wide by two deep
- Two levels of welded steel chains
- Snaps for each cylinder
- 10 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
9 Cylinders (3x3) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR3X3FS
Cylinder capacity: 1-9
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
44"w
x
38"d x 30"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds nine cylinders, three wide by three deep
- Two levels of welded steel chains
- Snaps for each cylinder
- 8 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
9 Cylinders (3x3) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR3X3PSFS
Cylinder capacity: 1-9
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
44"w
x
38"d x 72"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds nine cylinders, three wide by three deep
- Two levels of welded steel chains
- 8 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Gas cylinder rack includes snaps for each cylinder
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
8 Cylinders (4x2) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR4X2PSFS
Cylinder capacity: 1-8
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
58"w
x
26"d x 72"h
Gas Cylinder Storage Rack Features:
- Cylinder rack meets USGS high seismic hazard zone requirements when installed properly
- Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square steel tube continuously seam welded
- Holds eight cylinders, four wide by two deep
- Two levels of welded steel chains
- 10 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Gas cylinder rack includes snaps for each cylinder
- Sealed with exterior grade powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
10 Cylinders (5x2) - Barricade Gas Cylinder Rack
USA Safety Model#: BR5X2FS
Cylinder capacity: 1-10
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
72"w
x
26"d x 30"h
Gas Cylinder Storage Rack Features:
- 2" square steel tube continuously seam welded, 0.125" thick
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Holds ten cylinders, five wide by two deep
- Two levels of welded steel chains
- Snaps for each cylinder
- 12 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
10 Cylinders (5x2) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR5X2PSFS
Cylinder capacity: 1-10
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
72"w
x
26"d x 72"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds ten cylinders, five wide by two deep
- Two levels of welded steel chains
- 12 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Gas cylinder rack includes snaps for each cylinder
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
Shop By
Shopping Options
Outdoor/Weather Resistant