Skip to Content
The store will not work correctly when cookies are disabled.
4-7 Cylinder Capacity - Cylinder Racks and Stands
-
4 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Rack
USA Safety Model#: GRMDE4SSC
Cylinder capacity: 4
Supported cylinder sizes: D, E (4.5" diameter)
Rack dimensions (WxDxH):
13"w
x
13"d x 21"h
Oxygen Tank Rack Features:
- Holds oxygen and other medical gas tanks
- 5" square cylinder opening
- Cylinders are kept off of ground 0.25"
- All-welded steel construction
- Pre-drilled 1/2" holes in flat iron base
- Powder coated green finish
- Made in the USA
-
6 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Rack
USA Safety Model#: GRMDE6SSC
Cylinder capacity: 6
Supported cylinder sizes: D, E (4.5" diameter)
Rack dimensions (WxDxH):
18.5"w
x
12"d x 21"h
Oxygen Tank Rack Features:
- Holds oxygen and other medical gas tanks
- 5" square cylinder opening
- Cylinders are kept off of ground 0.25"
- All-welded steel construction
- Pre-drilled 1/2" holes in flat iron base
- Powder coated green finish
- Ships parcel
- Made in the USA
-
4 Cylinders - Oxygen & Medical Gases (D,E) - Red - Cylinder Rack
USA Safety Model#: GRMDE4SRSC
Cylinder capacity: 4
Supported cylinder sizes: D, E (4.5" diameter)
Rack dimensions (WxDxH):
13"w
x
13"d x 21"h
Oxygen Tank Rack Features:
- Holds oxygen and other medical gas tanks
- 5" square cylinder opening
- Cylinders are kept off of ground 0.25"
- All-welded steel construction
- Pre-drilled 1/2" holes in flat iron base
- Powder coated Red finish
- Made in the USA
-
6 Cylinders - Oxygen & Medical Gases (D,E) - Red - Cylinder Rack
USA Safety Model#: GRMDE6SRSC
Cylinder capacity: 6
Supported cylinder sizes: D, E (4.5" diameter)
Rack dimensions (WxDxH):
18.5"w
x
12"d x 21"h
Oxygen Tank Rack Features:
- Holds oxygen and other medical gas tanks
- 5" square cylinder opening
- Cylinders are kept off of ground 0.25"
- All-welded steel construction
- Pre-drilled 1/2" holes in flat iron base
- Powder coated Red finish
- Ships parcel
- Made in the USA
-
4 Propane Tanks (33 LB) - Outdoor - Horizontal Storage - Steel - Gas Cylinder Rack
USA Safety Model#: GR04202SAAM
Rack capacity: 4 cylinders (33 lb) of 12.5" diameter
Propane Tank Rack dimensions (WxDxH):
30"w
x
27"d x 35"h
Gas Cylinder Rack Features:
- Frame and shelf made from galvannealed steel
- Pre-drilled holes (13/16") for anchoring each foot pad
- Unit is powder coated with outdoor grade paint for extra durability
- Ships assembled ready for use
- Product bolts together and can be disassembled
- Made in the USA
-
6 Propane Tanks (33 LB) - Outdoor - Horizontal Storage - Steel - Gas Cylinder Rack
USA Safety Model#: GR06202SAAM
Rack capacity: 6 cylinders (33 lb) of 12.5" diameter
Propane Tank Rack dimensions (WxDxH):
30"w
x
27"d x 35"h
Gas Cylinder Rack Features:
- Frame and shelf made from galvannealed steel
- Pre-drilled holes (13/16") for anchoring each foot pad
- Unit is powder coated with outdoor grade paint for extra durability
- Ships assembled ready for use
- Product bolts together and can be disassembled
- Made in the USA
-
4 Cylinders - In-Line - Gas Cylinder Stand
USA Safety Model#: GR475FS
Stand capacity: 1-4 cylinders
Cylinder diameters: Up to 12"
Stand dimensions (WxDxH):
52"w
x
14"d x 30"h
Cylinder Stand Features:
- OSHA, NFPA (UFC) & CGA compliant
- Polypropylene strap and cinch buckle
- Fully welded construction
- Quality powder-coat paint finish for long service life
- Steel reinforced vinyl edge guards protect equipment
- Constructed from 11 gauge and heavier plate steel
- A chain set (Model # GB105FS) can be added to this product (optional)
- Compressed gas cylinder stand for industrial and commercial use
- Mounts to the floor, pre-drilled holes accommodates 3/8" anchor bolts
- Made in the USA
-
4 Cylinders - Basic - Gas Cylinder Rack
USA Safety Model#: GRCR4SC
Cylinder capacity: 4
Cylinder diameters supported: Up to 9.5"
Cylinder rack dimensions (WxDxH):
23"w
x
21.5"d x 36"h
Cylinder Storage Rack Features:
- Fully welded 1.5" steel tube
- Holds up to 4 cylinders up to 9.5" in diameter
- One chain included
- Pre-drilled 0.5" floor mounting holes on flat iron base
- Finished with black powder paint
- Industrial and commercial use
- Made in the USA
-
6 Cylinders - Basic - Gas Cylinder Rack
USA Safety Model#: GRCR6SC
Cylinder capacity: 6
Cylinder diameters supported: Up to 9.5"
Cylinder rack dimensions (WxDxH):
33"w
x
21.5"d x 36"h
Cylinder Storage Rack Features:
- Fully welded 1.5" steel tube
- Holds up to 6 cylinders up to 9.5" in diameter
- One chain included
- Pre-drilled 05" floor mounting holes on flat iron base
- Finished with black powder paint
- Industrial and commercial use
- Made in the USA
-
6 Cylinders - Gas Cylinder Stand
USA Safety Model#: GR600FS
Stand capacity: 1-6 cylinders
Diameters supported: Up to 12"
Stand dimensions (WxDxH):
44"w
x
23"d x 30"h
Gas Cylinder Stand Features:
- OSHA, NFPA (UFC) & CGA compliant
- 1.5" Polypropylene strap and cinch buckle
- Fully welded construction
- Quality powder-coat paint finish for long service life
- Steel reinforced vinyl edge guards protect equipment
- Constructed from 11 gauge and heavier plate steel
- Designed to mount to floor with four fasteners
- A chain set (Model # GB105FS) can be added to this product (optional)
- Process control version also available
- Industrial and commercial use
- Made in the USA
-
4 Cylinders - Gas Cylinder Stand
USA Safety Model#: GR400FS
Stand capacity: 1-4 cylinders
Diameters supported: Up to 12"
Stand dimensions (WxDxH):
32"w
x
23"d x 30"h
Cylinder Stand Features:
- OSHA, NFPA (UFC) & CGA compliant
- Cylinder rack has 1.5" Polypropylene strap and cinch buckle
- Fully welded construction
- Quality powder-coat paint finish for long service life
- Steel reinforced vinyl edge guards protect equipment
- Constructed from 11 gauge and heavier plate steel
- Designed to mount to floor with four fasteners
- A chain set (Model # GB105FS) can be added to this product (optional)
- Dual straps support each cylinder
- Industrial and commercial use
- Made in the USA
-
6 Tanks - Vertical Storage - Forkliftable - Propane Tank Rack
USA Safety Model#: TSLP170VT
Storage Rack Capacity: 6 propane tanks
Weight capacity: 450 lbs
Diameter supported: 12-1/2" (33# propane tank)
Cart dimensions (WxDxH):
38-1/4"w
x
39-1/8"d x 29"h
Propane Tank Rack Features:
- Holds up to 6 LP tanks (up to 12.5” diameter)
- Safety chains included for each side of rack
- All steel construction
- Coated with water based paint
- Made in the USA
-
6 Cylinders - Back-to-Back Process Station - Gas Cylinder Stand
USA Safety Model#: PR600PFS
Stand capacity: 1-6 cylinders
Diameters supported: Up to 12"
Stand dimensions (WxDxH):
52"w
x
24"d x 72"h
Gas Cylinder Stand Features:
- OSHA, NFPA (UFC) & CGA compliant
- 1.5" Polypropylene strap and cinch buckle
- Fully welded construction
- Quality powder paint finish for long service life
- Steel reinforced vinyl edge guards protect equipment
- Constructed from 11 gauge and heavier plate steel
- Designed to mount to floor with four fasteners
- A chain set (Model # GB105FS) can be added to this product (optional)
- Process control version also available
- Ship UPS oversized rate (partially disassembled for freight savings)
- Industrial and commercial use
- Made in the USA
-
4 Cylinders (1x4) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR1X4FS
Cylinder capacity: 1-4
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
16"w
x
50"d x 30"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds four cylinders, one wide by four deep
- Two levels of welded steel chains
- Snaps for each cylinder
- 4 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Gas cylinder rack sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
4 Cylinders - Back-to-Back Process Station - Gas Cylinder Stand
USA Safety Model#: PR400PFS
Stand capacity: 1-4 cylinders
Diameters supported: Up to 12"
Stand dimensions (WxDxH):
40"w
x
24"d x 72"h
Cylinder Stand Features:
- OSHA, NFPA (UFC) & CGA compliant
- Cylinder rack has 1.5" Polypropylene strap and cinch buckle
- Fully welded construction
- Quality powder paint finish for long service life
- Steel reinforced vinyl edge guards protect equipment
- Constructed from 11 gauge and heavier plate steel
- Designed to mount to floor with four fasteners
- A chain set (Model # GB105FS) can be added to this product (optional)
- Dual straps support each cylinder
- Ships partially assembled for UPS shipping capability
- Industrial and commercial use
- Made in the USA
-
4 Cylinders - In Line Process Station - Gas Cylinder Rack
USA Safety Model#: PR477FS
Cylinder capacity: 1-4
Cylinder diameters: Up to 12"
Cylinder rack dimensions (WxDxH):
52"w
x
14"d x 72"h
Cylinder Stand Features:
- OSHA, NFPA (UFC) & CGA compliant
- Color: Standard stock is medical white; Option for industrial gray
- 1.5" Polypropylene strap and cinch buckle
- Cylinder rack has fully welded construction
- Quality epoxy powder paint finish for long service life
- Steel reinforced vinyl edge guards protect equipment
- Constructed from 11 gauge and heavier plate steel
- Two levels of Unistrut provide regulator and control device mounting stations
- A chain set (Model # GB105FS) can be added to this product (optional)
- Unit ships ready to use by truck
- Industrial and commercial use
- Made in the USA
-
4 Cylinders (2x2) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR2X2FS
Cylinder capacity: 1-4
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
30"w
x
26"d x 30"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds four cylinders, two wide by two deep
- Two levels of welded steel chains
- 6 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Gas cylinder rack includes snaps for each cylinder
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
6 Cylinders - Hoist Hook - Lifting Eyes - Forkliftable - Cylinder Cradle Rack
USA Safety Model#: CCC6FLSC
Cylinder capacity: 6
Cylinder diameters supported: Up to 9.5"
Weight Capacity: 1,950 lbs
Cylinder rack dimensions (WxDxH):
33"w
x
23"d x 77"h
Cylinder Storage Rack Features:
- Holds up to 6 cylinders up to 9.5" in diameter
- Security bars bolt to frame to secure cylinders
- 4 lifting eyes and center hoist hook
- Top-mounted two-way forklift pockets
- Open base for pallet jack or forklift movement
- 3/16" steel floor plate (28"wx22"d)
- Finished with 5 stage powder coat, black
- Industrial and commercial use
- Outdoor or indoor use
- Made in the USA
-
6 Cylinders (2x3) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR2X3FS
Cylinder capacity: 1-6
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
30"w
x
38"d x 30"h
Gas Cylinder Storage Rack Features:
- Store acetylene, argon, butane, carbon dioxide (CO2), helium, hydrogen and nitrogen cylinders
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds six cylinders, two wide by three deep
- Two levels of welded steel chains
- Snaps for each cylinder
- 6 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk gas cylinder storage
- Made in the USA
-
4 Cylinders (2x2) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR2X2PSFS
Cylinder capacity: 1-4
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
30"w
x
26"d x 72"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds four cylinders, two wide by two deep
- Two levels of welded steel chains
- 6 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Gas cylinder rack includes snaps for each cylinder
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
6 Cylinders (2x3) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR2X3PSFS
Cylinder capacity: 1-6
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
30"w
x
38"d x 72"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds six cylinders, two wide by three deep
- Two levels of welded steel chains
- 6 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Gas cylinder rack includes snaps for each cylinder
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
4 Cylinders (4x1) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR4X1FS
Cylinder capacity: 1-4
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
58"w
x
16"d x 30"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds four cylinders, four wide by one deep
- Two levels of welded steel chains
- Snaps for each cylinder
- 5 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
6 Cylinders (3x2) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR3X2FS
Cylinder capacity: 1-6
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
44"w
x
26"d x 30"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds six cylinders, three wide by two deep
- Two levels of welded steel chains
- Snaps for each cylinder
- 8 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
6 Cylinders (3x2) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR3X2PSFS
Cylinder capacity: 1-6
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
44"w
x
25"d x 72"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds six cylinders, three wide by two deep
- Two levels of welded steel chains
- 8 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Gas cylinder rack includes snaps for each cylinder
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
4 Cylinders (4x1) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR4X1PSFS
Cylinder capacity: 1-4
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
58"w
x
16"d x 72"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds two cylinders, one wide by two deep
- Two levels of welded steel chains
- 5 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Gas cylinder rack includes snaps for each cylinder
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
5 Cylinders (5x1) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR5X1FS
Cylinder capacity: 1-5
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
72"w
x
16"d x 30"h
Gas Cylinder Storage Rack Features:
- 2" square steel tube continuously seam welded, 0.125" thick
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Holds five cylinders, five wide by one deep
- Two levels of welded steel chains
- Snaps for each cylinder
- 6 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
-
6 Cylinders - 16" Hinged Ramp - Gas Bottle Pallet Rack
USA Safety Model#: GP2106FS
Pallet capacity: 6
Cylinder diameters: 6"-10"
Pallet dimensions (WxDxH):
24"w
x
36"d x 37"h
Gas Tank Pallet Features:
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Fits 6 cylinders up to 10.25" diameter or smaller
- 16" hinged ramp welded onto pallet (24"Wx16"D)
- Two-way, fully enclosed forklift channels (3"H X 8"W)
- Rack is built from 1"x2" steel tube continuously seam welded
- Two levels of welded steel chains
- Snaps for each cylinder
- Pallet welded from 11 gauge steel
- Quality powder-coat paint finish for long service life & non-skid surface
- Made in the USA
-
5 Cylinders (5x1) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR5X1PSFS
Cylinder capacity: 1-5
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
72"w
x
16"d x 72"h
Gas Cylinder Storage Rack Features:
- Meets USGS high seismic hazard zone requirements when installed properly
- OSHA, NFP1, NFPA 55 and CGA compliant when used properly
- Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
- 2" square steel tube continuously seam welded, 0.125" thick
- Holds five cylinders, five wide by one deep
- Two levels of welded steel chains
- 6 Pre-drilled 0.531" diameter floor mounting holes
- Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
- Gas cylinder rack includes snaps for each cylinder
- Sealed with exterior grade black powder-coat paint
- Indoor or outdoor bulk cylinder storage
- Made in the USA
Shop By
Shopping Options
Outdoor/Weather Resistant