Cylinder Hand Trucks - Cylinder Carts and Dollies

61 Items

per page
Set Descending Direction
  1. 1 Cylinder - Oxygen & Medical Gases (D,E, M9, M60) - Green - Cylinder Cart
    1 Cylinder - Oxygen & Medical Gases (D,E, M9, M60) - Green - Cylinder Cart
    USA Safety Model#: GC900108SC
    Cylinder capacity: 1
    Weight capacity: 80 lbs (estimated)
    Supported cylinder sizes: D, E, M9, M60 (8" diameter, 36" height)
    Cart dimensions (WxDxH): 12.5"w x 14"d x 42"h

    Oxygen Tank Cart Features:
    • Transport one small cylinder
    • Two 8" semi-pneumatic wheels with plastic hub (1.75" wide)
    • Designed with a simple scoop 8.25" x 8.25" baseplate
    • Handle height is approximately 42"
    • All welded steel construction
    • Includes safety chain
    • Powder coated green finish
    • Cylinder not included
    • Made in the USA
    $135.00
  2. 1 Propane Tank - Green - Cylinder Dolly
    1 Propane Tank - Green - Cylinder Dolly
    USA Safety Model#: HT75010PSC
    Dolly capacity: 1 tank (33lb, 43lb, or 100 lb) or stack up to 2 tanks (33lb or 43lb only)
    Diameters supported: Up to 16"
    Weight capacity: 400 lb
    Dolly dimensions (WxDxH): 23.5"w x 17.5"d x 52"h

    Cylinder Dolly Features:
    • Hold one 33lb, 43lb, or 100lb propane tank or stack two 33lb or 43lb tanks
    • OSHA, NFPA (UFC) & CGA compliant
    • Constructed from steel with sturdy bracing
    • 10" semi-pneumatic wheels with steel hubs with ball bearings (wheel dimensions 10" x 2.75")
    • Continuous handle
    • Two chains included to secure cylinders
    • Powder coated for durability
    • Industrial, medical and commercial use
    • Made in the USA
    $315.00
  3. 2 Cylinders - Green - Gas Cylinder Dolly
    2 Cylinders - Green - Gas Cylinder Dolly
    USA Safety Model#: HT75020SC
    Dolly capacity: 2 cylinders
    Diameters supported: Up to 9.5" each
    Weight capacity: 400 lb
    Dolly dimensions (WxDxH): 20"w x 27"d x 49"h

    Cylinder Dolly Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • Constructed from steel with sturdy bracing
    • 10" semi-pneumatic wheels with steel hubs with ball bearings (10" x 2.75")
    • Continuous handle
    • Chains to secure cylinders
    • Powder coated green
    • Industrial, medical and commercial use
    • Made in the USA
    $340.00
  4. 2 Cylinders - Tool Tray - Green - Welding Cart
    2 Cylinders - Tool Tray - Green - Welding Cart
    USA Safety Model#: HT40114SC
    Welding cart capacity: 2 cylinders
    Cylinder diameters supported: Up to 12.5" (fuel) & 9.5" (oxygen)
    Weight capacity: 500 lbs
    Cylinder Carts dimensions (WxDxH): 31"w x 13.5"d x 46"h

    Cylinder Dolly Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • 3" high tool tray for holding equipment
    • 14" semi-pneumatic wheels with steel hubs complete with 3/4" ball bearings (wheel dimensions 14" x 1.75")
    • Continuous handle
    • Chains to secure cylinders
    • Powder coated for durability
    • Made in the USA
    $350.00
  5. 2 Cylinders - Flat Free Tires - Green - Gas Cylinder Dolly
    2 Cylinders - Flat Free Tires - Green - Gas Cylinder Dolly
    USA Safety Model#: HT75120SC
    Dolly capacity: 2 cylinders
    Diameters supported: Up to 9.5" each
    Weight capacity:400 lb
    Dolly dimensions (WxDxH): 22"w x 27"d x 49"h

    Cylinder Dolly Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • Constructed from steel with sturdy bracing
    • 10" pneumatic wheels, steel hubs, no-flat sealant (10" x 4")
    • Continuous handle
    • Chains to secure cylinders
    • Powder coated green
    • Industrial, medical and commercial use
    • Made in the USA
    $410.00
  6. 1 Cylinder - Gas Cylinder Dolly
    1 Cylinder - Gas Cylinder Dolly
    USA Safety Model#: HT901FS
    Dolly capacity: 1 cylinder
    Weight capacity: 300 lbs
    Diameters supported: Up to 12"
    Dolly dimensions (WxDxH): 18"w x 18"d x 47"h

    Cylinder Dolly Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • 8" steel hub welded semi-pneumatic wheels
    • 3/16" steel supports and round steel tube
    • Constructed from 11 gauge HR steel
    • Polypropylene strap and cinch buckle
    • Fully welded construction
    • Quality powder-coat paint finish for long service life
    • Cylinder dolly ships UPS oversize rate
    • Industrial, medical and commercial use
    • Made in the USA
    $415.00
  7. 1 Cylinder - Heavy Duty - Gas Cylinder Dolly
    1 Cylinder - Heavy Duty - Gas Cylinder Dolly
    USA Safety Model#: HT902FS
    Dolly capacity: 1 cylinder
    Weight capacity: 700 lbs
    Diameters supported: Up to 12"
    Dolly dimensions (WxDxH): 19"w x 18"d x 47"h

    Cylinder Dolly Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • 10.5" fully pneumatic wheels
    • 3/16" steel supports and round steel tube
    • Cylinder dolly constructed from 11 gauge HR steel
    • Polypropylene strap and cinch buckle
    • Fully welded construction
    • Quality powder-coat paint finish for long service life
    • Ships UPS oversize rate
    • Industrial, medical and commercial use
    • Made in the USA
    $445.00
  8. 1 Propane Tank - Flat-Free Tires - Green - Cylinder Dolly
    1 Propane Tank - Flat-Free Tires - Green - Cylinder Dolly
    USA Safety Model#: HT75110PSC
    Dolly capacity: 1 tank (33lb, 43lb, or 100 lb) or stack up to 2 tanks (33lb or 43lb only)
    Diameters supported: Up to 16"
    Weight capacity: 600 lb
    Dolly dimensions (WxDxH): 26"w x 17.5"d x 52"h

    Cylinder Dolly Features:
    • Hold one 33lb, 43lb, or 100lb propane tank or stack two 33lb or 43lb tanks
    • OSHA, NFPA (UFC) & CGA compliant
    • Constructed from steel with sturdy bracing
    • 10" pneumatic tires with steel hubs and no flat sealant (wheel dimensions 10" x 4")
    • Continuous handle
    • Two chains included to secure cylinders
    • Powder coated for durability
    • Industrial, medical and commercial use
    • Made in the USA
    $480.00
  9. 2 Cylinders - Steering Casters - Green - Gas Cylinder Dolly
    2 Cylinders - Steering Casters - Green - Gas Cylinder Dolly
    USA Safety Model#: HT750203RCSC
    Dolly capacity: 2 cylinders
    Diameters supported: Up to 9.5" each
    Weight capacity: 400 lb
    Dolly dimensions (WxDxH): 20"w x 27"d x 48"h

    Cylinder Dolly Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • Constructed from steel with sturdy bracing
    • 10" semi-pneumatic wheels with steel hubs with ball bearings (10" x 2.75")
    • Front 3 Ply Rotacasters
    • Continuous handle
    • Chains to secure cylinders
    • Powder coated green
    • Industrial, medical and commercial use
    • Made in the USA
    $525.00
  10. 2 Cylinders - Gas Cylinder Dolly
    2 Cylinders - Gas Cylinder Dolly
    USA Safety Model#: HT952FS
    Dolly capacity: 2 cylinders
    Cylinder diameter: Up to 12"
    Weight capacity: 700 lbs
    Dolly dimensions (WxDxH): 32.75"w x 19.25"d x 48.25"h

    Cylinder Dolly Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • 10.5" fully pneumatic wheels
    • 3/16" steel supports and round steel tube
    • Constructed from 11 and 10 gauge HR steel
    • Cylinder dolly has polypropylene strap and cinch buckle
    • Fully welded construction
    • Quality powder-coat paint finish for long service life
    • Made in the USA
    $540.00
  11. 1 Cylinder - Flat Free Tires - Gas Cylinder Dolly
    1 Cylinder - Flat Free Tires - Gas Cylinder Dolly
    USA Safety Model#: HT902FFFS
    Dolly capacity: 1 cylinder
    Weight capacity: 500 lbs
    Diameters supported: Up to 12"
    Dolly dimensions (WxDxH): 19"w x 18"d x 47"h

    Cylinder Dolly Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • 10.5" urethane filled flat free tires
    • 3/16" steel supports and round steel tube
    • Cylinder dolly constructed from 11 gauge HR steel
    • Polypropylene strap and cinch buckle
    • Fully welded construction
    • Quality powder-coat paint finish for long service life
    • Ships UPS oversize rate
    • Industrial, medical and commercial use
    • Made in the USA
    $545.00
  12. 1 Cylinder - 4 Wheels - Gas Cylinder Hand Truck
    1 Cylinder - 4 Wheels - Gas Cylinder Hand Truck
    USA Safety Model#: HT903FS
    Hand Truck capacity: 1 cylinder
    Weight capacity: 700 lbs
    Diameters supported: Up to 12"
    Hand truck dimensions (WxDxH): 19"w x 19"d x 47"h

    Cylinder Hand Truck Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • 8" semi-pneumatic wheels
    • Swing-down steel carriages for use of rear swivel casters
    • 3/16" steel supports and round steel tube
    • Constructed from 11 gauge HR steel
    • Polypropylene strap and cinch buckle
    • Hand truck made of fully welded construction
    • Quality powder-coat paint finish for long service life
    • Ships parcel at oversize rate
    • Industrial, medical and commercial use
    • Made in the USA
    $560.00
  13. 2 Cylinders - Flat Free Tires - Gas Cylinder Dolly
    2 Cylinders - Flat Free Tires - Gas Cylinder Dolly
    USA Safety Model#: HT952FFFS
    Dolly capacity: 2 cylinders
    Cylinder diameter: Up to 12"
    Weight capacity: 500 lbs
    Dolly dimensions (WxDxH): 35"w x 20"d x 47"h

    Cylinder Dolly Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • 10.5" urethane flat free tires
    • 3/16" steel supports and round steel tube
    • Constructed from 11 and 10 gauge HR steel
    • Cylinder dolly has polypropylene strap and cinch buckle
    • Fully welded construction
    • Quality powder-coat paint finish for long service life
    • Made in the USA
    $570.00
  14. 1 Cylinder - 4 Wheels - Heavy Duty - Gas Cylinder Hand Truck
    1 Cylinder - 4 Wheels - Heavy Duty - Gas Cylinder Hand Truck
    USA Safety Model#: HT904FS
    Hand truck capacity: 1 cylinder
    Weight capacity: 880 lbs
    Diameters supported: Up to 12"
    Hand truck dimensions (WxDxH): 21"w x 19"d x 47"h

    Cylinder Hand Truck Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • Swing-down steel carriages for use of rear swivel casters
    • Gas cylinder hand truck has 10.5 inch fully pneumatic wheels
    • 3/16" steel supports and round steel tube
    • Cylinder hand truck is constructed from 11 gauge HR steel
    • Polypropylene strap and cinch buckle
    • Fully welded construction
    • Quality powder-coat paint finish for long service life
    • Ships UPS oversize rate
    • Industrial, medical and commercial use
    • Made in the USA
    $595.00
  15. 2 Cylinders - Heavy Duty - Gas Cylinder Dolly
    2 Cylinders - Heavy Duty - Gas Cylinder Dolly
    USA Safety Model#: HT991FS
    Dolly capacity: 2 cylinders
    Cylinder diameter: Up to 12"
    Weight capacity: 1,000 lbs
    Dolly dimensions (WxDxH): 35"w x 24"d x 47"h

    Cylinder Dolly Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • 16" fully pneumatic wheels
    • 3/16" steel supports and round steel tube
    • Constructed from 11 gauge HR steel
    • Polypropylene strap and cinch buckle
    • Fully welded construction
    • Quality powder-coat paint finish for long service life
    • Made in the USA
    $650.00
  16. 1 Cylinder - Hoist Hook - Heavy Duty - Gas Cylinder Dolly
    1 Cylinder - Hoist Hook - Heavy Duty - Gas Cylinder Dolly
    USA Safety Model#: HT3502FS
    Dolly capacity: 1 cylinder
    Cylinder diameters supported: Up to 12" diameter
    Lifting hook weight capacity: 300 lbs
    Dolly dimensions (WxDxH): 21"w x 19"d x 68"h

    Cylinder Dolly Features:
    • Hook attachment for transport with hoist rigs
    • Clamping posts to secure cylinders at any angle
    • 10.5" diameter four-ply fully pneumatic wheels
    • UFC, NFPA, CGA, & OSHA compliant
    • Dual ball bearings on welded steel hubs
    • 7 and 11 gauge hot rolled steel construction of base and supports
    • 14 gauge and heavier tube framing
    • Zero lift height loading, perimeter braced, eases loading and improves safety
    • 54" long x 1.5" wide, lab tested cinch straps for each cylinder
    • Powder-paint painted for durability
    • Made in the USA using American steel and labor
    $650.00
  17. 1 Cylinder - Hoist Hook - Green - Gas Cylinder Dolly
    1 Cylinder - Hoist Hook - Green - Gas Cylinder Dolly
    USA Safety Model#: HT75010LESC
    Dolly capacity: 1 cylinder
    Diameters supported: Up to 9.5"
    Weight capacity: 200 lbs
    Lifting hook weight capacity: 1,000 lbs
    Dolly dimensions (WxDxH): 19"w x 11"d x 73.5"h

    Cylinder Dolly Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • Hoist hook to lift dolly with crane or other lifting device
    • Steel cage door secures cylinder on dolly
    • 10" semi-pneumatic, hard-rubber wheels have steel hubs with ball bearings (wheel dimensions 10" x 2.75")
    • Continuous handle
    • Powder coated green for durability
    • Industrial, medical and commercial use
    • Made in the USA
    $680.00
  18. 2 Cylinders - Steering Casters - Heavy Duty - Green - Gas Cylinder Dolly
    2 Cylinders - Steering Casters - Heavy Duty - Green - Gas Cylinder Dolly
    USA Safety Model#: HT751203RCSC
    Dolly capacity: 2 cylinders
    Diameters supported: Up to 9.5" each
    Weight capacity: 600 lb
    Dolly dimensions (WxDxH): 23"w x 27"d x 48"h

    Cylinder Dolly Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • Constructed from steel with sturdy bracing
    • 10" pneumatic wheels with steel hubs with ball bearings (10" x 4")
    • Front 3 Ply Rotacasters
    • Continuous handle
    • Chains to secure cylinders
    • Powder coated green
    • Industrial, medical and commercial use
    • Made in the USA
    $685.00
  19. 2 Cylinders - Rear Casters - Gas Cylinder Hand Truck
    2 Cylinders - Rear Casters - Gas Cylinder Hand Truck
    USA Safety Model#: HT953FS
    Hand truck capacity: 2
    Cylinder diameter: Up to 10"
    Weight capacity: 1,000 lbs
    Hand truck dimensions (WxDxH): 31.5"w x 20"d x 47"h

    Cylinder Hand Truck Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • 10.5" fully pneumatic wheels
    • Transport acetylene, argon, butane, carbon dioxide (CO2), helium, hydrogen and other gas cylinders
    • 3" fold-away rear casters
    • 3/16" steel supports and round steel tube
    • Constructed from 11 gauge HR steel
    • Polypropylene strap and cinch buckle
    • Fully welded construction
    • Quality powder-coat paint finish for long service life
    • Optional tool tray (Model # HT953TTFS) available for purchase
    • Cylinder hand truck is made in the USA
    • Hand truck ships LTL Freight
    $695.00
  20. 1 Cylinder - 4 Wheels - Flat Free Tires - Gas Cylinder Hand Truck
    1 Cylinder - 4 Wheels - Flat Free Tires - Gas Cylinder Hand Truck
    USA Safety Model#: HT904FFFS
    Hand truck capacity: 1 cylinder
    Weight capacity: 600 lbs
    Diameters supported: Up to 12"
    Hand truck dimensions (WxDxH): 21"w x 19"d x 47"h

    Cylinder Hand Truck Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • Swing-down steel carriages for use of rear swivel casters
    • Gas cylinder hand truck has 10.5 inch urethane filled flat free tires
    • 3/16" steel supports and round steel tube
    • Cylinder hand truck is constructed from 11 gauge HR steel
    • Polypropylene strap and cinch buckle
    • Fully welded construction
    • Quality powder-coat paint finish for long service life
    • Ships UPS oversize rate
    • Industrial, medical and commercial use
    • Made in the USA
    $695.00
  21. 1 Cylinder - Stair Climber - Green - Gas Cylinder Dolly
    1 Cylinder - Stair Climber - Green - Gas Cylinder Dolly
    USA Safety Model#: HT75010R3SC
    Dolly capacity: 1 cylinder
    Diameters supported: Up to 9.5"
    Weight capacity:400 lb
    Stair Climbing Dolly dimensions (WxDxH): 19"w x 11"d x 49"h

    Cylinder Stair Climbing Hand Cart Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • Stair-climbing rotacaster wheels
    • Constructed from steel with sturdy bracing
    • Continuous handle
    • Chains to secure cylinders
    • Powder coated for durability
    • Industrial, medical and commercial use
    • Made in the USA
    $725.00
  22. 2 Cylinders - Firewall - Narrow - Green - Welding Cart
    2 Cylinders - Firewall - Narrow - Green - Welding Cart
    USA Safety Model#: HT60010FWSC
    Welding cart capacity: 2 cylinders
    Cylinder diameters supported: Up to 7" (fuel) & 9.5" (oxygen)

    Cylinder Carts dimensions (WxDxH): 20"w x 30"d x 62"h

    Cylinder Firewall Cart Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • Firewall barrier (1-hour rating)
    • Tool tray for holding equipment
    • 10" semi-pneumatic wheel with 5/8" ball bearings
    • Removable handle
    • Two chains to secure cylinders
    • Powder coated for durability
    • Made in the USA
    $740.00
  23. 2 Cylinders - Flat Free Tires - Rear Casters - Gas Cylinder Hand Truck
    2 Cylinders - Flat Free Tires - Rear Casters - Gas Cylinder Hand Truck
    USA Safety Model#: HT953FFFS
    Hand truck capacity: 2
    Cylinder diameter: Up to 10"
    Weight capacity: 600 lbs
    Hand truck dimensions (WxDxH): 31.5"w x 20"d x 47"h

    Cylinder Hand Truck Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • 10.5" flat free urethane filled wheels
    • Transport acetylene, argon, butane, carbon dioxide (CO2), helium, hydrogen and other gas cylinders
    • 3" fold-away rear casters
    • 3/16" steel supports and round steel tube
    • Constructed from 11 gauge HR steel
    • Polypropylene strap and cinch buckle
    • Fully welded construction
    • Quality powder-coat paint finish for long service life
    • Cylinder hand truck is made in the USA
    $795.00
  24. 2 Cylinders - Firewall - Heavy Duty - Tool Tray - Green - Welding Cart
    2 Cylinders - Firewall - Heavy Duty - Tool Tray - Green - Welding Cart
    USA Safety Model#: HT40216FWSC
    Welding cart capacity: 2 cylinders
    Cylinder diameters supported: Up to 12.5" (fuel) & 9.5" (oxygen)
    Weight capacity: 780 lbs
    Cylinder Carts dimensions (WxDxH): 35"w x 21.5"d x 62"h

    Cylinder Dolly Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • Firewall barrier
    • Tool tray for holding equipment
    • 16" pneumatic wheels with steel hubs and no-flat additive complete with 3/4" ball bearings (wheel dimensions 16" x 4")
    • Continuous handle
    • Chains to secure cylinders
    • Powder coated for durability
    • Made in the USA
    $795.00
  25. 2 Cylinders - Heavy Duty - Rear Casters - Hand Truck
    2 Cylinders - Heavy Duty - Rear Casters - Hand Truck
    USA Safety Model#: HT973FS
    Cart capacity: 2 cylinders
    Cylinder diameters supported: Up to 12.25" (fuel) & 10" (oxygen)
    Weight capacity: 1,000 lbs
    Cart dimensions (WxDxH): 33.5"w x 26.5"d x 49"h

    Hand Truck Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • 16" diameter four-ply fully pneumatic speed rated wheels
    • 5" diameter rear casters
    • Dual ball bearings on welded steel hubs
    • 7 and 11 gauge hot rolled steel construction of base and supports
    • 14 gauge and heavier tube framing
    • Zero lift height loading, perimeter braced, eases loading and improves safety
    • 54" long x 1.5" wide, lab tested cinch straps for each cylinder
    • Powder-coat painted for durability
    • Optional tool tray (Model # HT953TTFS) available for purchase
    • Made in the USA using American steel and labor
    $810.00
  26. 3 Cylinders - 4 wheels - Flat Free Tires - Green - Gas Cylinder Hand Truck
    3 Cylinders - 4 wheels - Flat Free Tires - Green - Gas Cylinder Hand Truck
    USA Safety Model#: HT751203RCLGFFSC
    Dolly capacity: 3 tanks (9.5" diameter)
    Diameters supported: Up to 16"
    Weight capacity: 600 lb
    Dolly dimensions (WxDxH): 23"w x 32"d x 48"h

    Cylinder Dolly Features:
    • Hold 1-3 high pressure cylinders (9.5" diameter)
    • OSHA, NFPA (UFC) & CGA compliant
    • Constructed from steel with sturdy bracing
    • 10" foam filled tires (wheel dimensions 10" x 4")
    • Two chains included to secure cylinders
    • Powder coated for durability
    • Industrial, medical and commercial use
    • Made in the USA
    $815.00
  27. 1 Cylinder - Hoist Hook - Flat Free Tires - Gas Cylinder Dolly
    1 Cylinder - Hoist Hook - Flat Free Tires - Gas Cylinder Dolly
    USA Safety Model#: HT3502FFFS
    Dolly capacity: 1 cylinder
    Cylinder diameters supported: Up to 12" diameter
    Lifting hook weight capacity: 300 lbs
    Dolly dimensions (WxDxH): 21"w x 19"d x 68"h

    Cylinder Dolly Features:
    • Hook attachment for transport with hoist rigs
    • Clamping posts to secure cylinders at any angle
    • 10.5" diameter flat free urethane filled wheels
    • UFC, NFPA, CGA, & OSHA compliant
    • Dual ball bearings on welded steel hubs
    • 7 and 11 gauge hot rolled steel construction of base and supports
    • 14 gauge and heavier tube framing
    • Zero lift height loading, perimeter braced, eases loading and improves safety
    • 54" long x 1.5" wide, lab tested cinch straps for each cylinder
    • Powder-coat painted for durability
    • Made in the USA using American steel and labor
    $875.00
  28. 1 Cylinder - Caddy(tm) - Flat Free Tires - Gas Cylinder Lifting Hand Truck
    1 Cylinder - Caddy(tm) - Flat Free Tires - Gas Cylinder Lifting Hand Truck
    USA Safety Model#: HT2000FFFS
    Caddy capacity: 1 cylinder
    Weight capacity: 500 lbs
    Diameters supported: Up to 12"
    Product dimensions (WxDxH): 32"w x 30"d x 48"h

    Cylinder Caddy Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • Lift & transport cylinders to install on welding carts, platforms & pallets
    • 11" manual lift
    • 10.5" urethane filled flat free tires
    • Rear swivel casters to allow cart to move on 4 wheels
    • Minimum recommended cylinder height is 40"
    • Fully welded construction
    • Quality powder-coat paint finish for long service life
    • Gas caddy ships UPS double oversize rate
    • Industrial, medical and commercial use
    • Patented
    • Made in the USA
    $875.00
  29. 2 Cylinders - Firewall - Hoist Hook - Heavy Duty - Green - Welding Cart
    2 Cylinders - Firewall - Hoist Hook - Heavy Duty - Green - Welding Cart
    USA Safety Model#: HT55216FWSC
    Welding cart capacity: 2 cylinders
    Cylinder diameters supported: Up to 12.5" (fuel) & 9.5" (oxygen)
    Lifting Eye Weight capacity: 1,000 lbs
    Cylinder Carts dimensions (WxDxH): 35"w x 29"d x 62"h

    Cylinder Dolly Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • Firewall barrier
    • Locking toolbox for holding equipment (lock not included)
    • 1,000 lb lifting eye
    • Hose wrap arms on frame
    • 16" pneumatic wheels with steel hubs and no-flat additive complete with 3/4" ball bearings (wheel dimensions 16" x 4")
    • Continuous handle
    • Two 1/4" steel perma clamps to secure cylinders
    • Powder coated for durability
    • Made in the USA
    $925.00
  30. 2 Cylinders or 1 Dewar - 3 Wheels - Gas Cylinder Dolly
    2 Cylinders or 1 Dewar - 3 Wheels - Gas Cylinder Dolly
    USA Safety Model#: HT73012SC
    Capacity: 1 cylinder
    Cylinder diameters supported:
    • 2 tanks - 9" diameter per tank
    • 1 tank - 20" diameter (180 Liter)
    Weight capacity: 1,500 lbs
    Cart dimensions (WxDxH): 32"w x 15"d x 53"h

    Cart Features:
    • Multipurpose dolly
    • Tilt-back cylinder transport
    • Two 12" bolt-together, 4-ply pneumatic wheels (12"x4")
    • One rear 10" swivel caster wheel (10"x2")
    • Includes 4ft D-Ring ratchet strap
    • Durable powder-coated, green finish
    • Industrial, medical and commercial use
    • Made in the USA
    $930.00
  31. 1 Cryogenic Tank (20" Dewar) - Gas Cylinder Dolly
    1 Cryogenic Tank (20" Dewar) - Gas Cylinder Dolly
    USA Safety Model#: GC210131WC
    Capacity: 1 cylinder
    Cylinder diameters supported: 20" (160, 180, 200 Liter)
    Weight capacity: 1,000 lbs
    Cart dimensions (WxDxH): 30"w x 31"d x 48 5/8"h

    Cart Features:
    • Low profile design for easier loading and unloading
    • Made from heavy duty structural steel and schedule 40 pipe
    • Cylinder remains vertical during transport
    • Two 10" wheels and one 8" wheel with rolling and swivel lock
    • Chain to secure cylinder to cart
    • Durable powder coated finish
    • Industrial, medical and commercial use
    • Made in the USA
    $960.00
  32. 2 Cylinders - Firewall - Hoist Hook - Narrow - Green - Welding Cart
    2 Cylinders - Firewall - Hoist Hook - Narrow - Green - Welding Cart
    USA Safety Model#: HT60010FWLESC
    Welding cart capacity: 2 cylinders
    Cylinder diameters supported: Up to 7" (fuel) & 9.5" (oxygen)
    Lifting hook weight capacity: 1,000 lbs

    Cylinder Carts dimensions (WxDxH): 20"w x 30"d x 62"h

    Cylinder Firewall Cart Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • Firewall barrier (1-hour rating)
    • Lifting Eye
    • Hose wrap arms on frame
    • Tool tray for holding equipment
    • 10" semi-pneumatic wheel with 5/8" ball bearings
    • Removable handle
    • Two chains to secure cylinders
    • Powder coated for durability
    • Made in the USA
    $965.00
  33. 1 Cylinder - Caddy(tm) Gas Cylinder Lifting Hand Truck
    1 Cylinder - Caddy(tm) Gas Cylinder Lifting Hand Truck
    USA Safety Model#: HT2000FS
    Caddy capacity: 1 cylinder
    Weight capacity: 1,000 lbs
    Diameters supported: Up to 12"
    Caddy dimensions (WxDxH): 22"w x 20"d x 54"h

    Cylinder Caddy Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • Lift & transport cylinders to install on welding carts, platforms & pallets
    • 11" manual lift
    • Fully pneumatic wheels
    • Rear swivel casters to allow cart to move on 4 wheels
    • Minimum recommended cylinder height is 40"
    • Fully welded construction
    • Quality powder-coat paint finish for long service life
    • Gas caddy ships UPS double oversize rate
    • Industrial, medical and commercial use
    • Patented
    • Made in the USA
    $985.00
  34. 2 Cylinders - Hoist Hook - Flat Free Tires - Gas Cylinder Hand Truck
    2 Cylinders - Hoist Hook - Flat Free Tires - Gas Cylinder Hand Truck
    USA Safety Model#: HT3552FFFS
    Hand truck capacity: 2
    Cylinder diameters supported: Up to 12" diameter
    Weight capacity: 600 lbs
    Hand truck dimensions (WxDxH): 32"w x 20"d x 71"h

    Cylinder Hand Truck Features:
    • Hook attachment for transport with hoist rigs
    • Clamping posts to secure cylinders at any angle
    • 10.5" diameter flat free urethane filled wheels
    • UFC, NFPA, CGA, & OSHA compliant
    • Dual ball bearings on welded steel hubs
    • 7 and 11 gauge hot rolled steel construction of base and supports
    • 14 gauge and heavier tube framing
    • Zero lift height loading, perimeter braced, eases loading and improves safety
    • 54" long x 1.5" wide, lab tested cinch straps for each cylinder
    • Powder-coat painted for durability
    • Made in the USA using American steel and labor
    $995.00
  35. 1 Cylinder - Green - Gas Cylinder Lifting Hand Truck
    1 Cylinder - Green - Gas Cylinder Lifting Hand Truck
    USA Safety Model#: HTJC10SC
    Dolly capacity: 1 cylinder
    Diameters supported: Up to 9.5"
    Weight capacity: 400 lb
    Dolly dimensions (WxDxH): 14"w x 20"d x 47.5"h

    Cylinder Dolly Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • Lifts cylinder 10" above floor
    • Constructed from steel with sturdy bracing
    • 10" semi-pneumatic wheels with steel hubs with ball bearings (10" x 2.75")
    • Continuous handle
    • 2 straps to secure cylinder
    • Green powder coat for durability
    • Industrial, medical and commercial use
    • Made in the USA
    $995.00
  36. 1 Cryogenic Tank (20" Dewar) - Green - Gas Cylinder Dolly
    1 Cryogenic Tank (20" Dewar) - Green - Gas Cylinder Dolly
    USA Safety Model#: GCEZL4LSC
    Capacity: 1 cylinder
    Cylinder diameters supported: 20" (160,180, 200 Liter)
    Weight capacity: 1,200 lbs
    Cart dimensions (WxDxH): 28"w x 32"d x 41.5"h

    Cryogenic Tank Cart Features:
    • Low profile design for easier tank loading and unloading
    • Vertical cylinder transport
    • Two 10" wheels with aluminum hub (10"x2.5")
    • One rear 6" caster wheel with brake (6"x2")
    • Chain to secure cylinder to cart
    • Durable powder green coated finish
    • Industrial, medical and commercial use
    • Made in the USA
    $1,060.00
  37. 2 Cylinders - Steel Wheels - Welding Cart
    2 Cylinders - Steel Wheels - Welding Cart
    USA Safety Model#: HT987FS
    Welding cart capacity: 2 cylinders
    Cylinder diameter: Up to 12.375"
    Welding cart dimensions (WxDxH): 31"w x 26"d x 47"h

    Cylinder Torch Cart Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • For use in industrial and welding environments
    • 20" welded steel wheels
    • Specially configured to use with fuel/oxygen bottle combinations
    • 3/16" steel supports and round steel tube
    • Constructed from 11 gauge HR steel
    • Polypropylene strap and cinch buckle
    • Cylinder cart has fully welded construction
    • Quality powder-coat paint finish for long service life
    • Made in the USA
    $1,075.00
  38. 2 Cylinders - Hoist Hook - Gas Cylinder Hand Truck
    2 Cylinders - Hoist Hook - Gas Cylinder Hand Truck
    USA Safety Model#: HT3552FS
    Hand truck capacity: 2
    Cylinder diameters supported: Up to 12" diameter
    Weight capacity: 600 lbs
    Hand truck dimensions (WxDxH): 32"w x 20"d x 71"h

    Cylinder Hand Truck Features:
    • Hook attachment for transport with hoist rigs
    • Clamping posts to secure cylinders at any angle
    • 10.5" diameter four-ply fully pneumatic wheels
    • UFC, NFPA, CGA, & OSHA compliant
    • Dual ball bearings on welded steel hubs
    • 7 and 11 gauge hot rolled steel construction of base and supports
    • 14 gauge and heavier tube framing
    • Zero lift height loading, perimeter braced, eases loading and improves safety
    • 54" long x 1.5" wide, lab tested cinch straps for each cylinder
    • Powder-coat painted for durability
    • Made in the USA using American steel and labor
    $1,120.00
  39. 2 Cylinders - Firewall - Hoist Hook - Large Fuel Cylinder - Green - Welding Cart
    2 Cylinders - Firewall - Hoist Hook - Large Fuel Cylinder - Green - Welding Cart
    USA Safety Model#: HT55216FWPSC
    Welding cart capacity: 2 cylinders
    Cylinder diameters supported: Up to 15.5" (fuel) & 9.5" (oxygen)
    Lifting eye weight capacity: 1,000 lbs
    Cylinder Carts dimensions (WxDxH): 39"w x 28"d x 65.5"h

    Cylinder Firewall Cart Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • Firewall barrier
    • Locking toolbox for holding equipment (lock not included)
    • 1,000 lb rated lifting eye for transport by hoist hook
    • Hose wrap arms on frame
    • 16" pneumatic wheels with steel hubs and no-flat additive complete with 3/4" ball bearings (wheel dimensions 16" x 4")
    • Continuous handle
    • Two 1/4" steel perma-clamps to secure cylinders
    • Powder coated for durability
    • Made in the USA
    $1,195.00
  40. 2 Cylinders - Hoist Hook - Flat Free Tires - Rear Casters - Gas Cylinder Hand Truck
    2 Cylinders - Hoist Hook - Flat Free Tires - Rear Casters - Gas Cylinder Hand Truck
    USA Safety Model#: HT3553FFFS
    Hand truck capacity: 2
    Cylinder diameters supported: Up to 12" diameter
    Lifting hook weight capacity: 600 lbs
    Hand truck dimensions (WxDxH): 32"w x 20"d x 68"h

    Cylinder Hand Truck Features:
    • Hook attachment for transport with hoist rigs
    • Clamping posts to secure cylinders at any angle
    • 10.5" diameter flat free urethane filled tires
    • 3" diameter rear casters
    • UFC, NFPA, CGA, & OSHA compliant
    • Dual ball bearings on welded steel hubs
    • 7 and 11 gauge hot rolled steel construction of base and supports
    • 14 gauge and heavier tube framing
    • Zero lift height loading, perimeter braced, eases loading and improves safety
    • 54" long x 1.5" wide, lab tested cinch straps for each cylinder
    • Powder-coat painted for durability
    • Made in the USA using American steel and labor
    $1,225.00
  41. 2 Cylinders - Hoist Hook - Rear Casters - Gas Cylinder Hand Truck
    2 Cylinders - Hoist Hook - Rear Casters - Gas Cylinder Hand Truck
    USA Safety Model#: HT3553FS
    Hand truck capacity: 2
    Cylinder diameters supported: Up to 12" diameter
    Lifting hook weight capacity: 600 lbs
    Hand truck dimensions (WxDxH): 32"w x 20"d x 68"h

    Cylinder Hand Truck Features:
    • Hook attachment for transport with hoist rigs
    • Clamping posts to secure cylinders at any angle
    • 10.5" diameter four-ply fully pneumatic wheels
    • 3" diameter rear casters
    • UFC, NFPA, CGA, & OSHA compliant
    • Dual ball bearings on welded steel hubs
    • 7 and 11 gauge hot rolled steel construction of base and supports
    • 14 gauge and heavier tube framing
    • Zero lift height loading, perimeter braced, eases loading and improves safety
    • 54" long x 1.5" wide, lab tested cinch straps for each cylinder
    • Powder-coat painted for durability
    • Made in the USA using American steel and labor
    $1,260.00
  42. 2 Cylinders - Hoist Hook - Flat Free Tires - Rear Casters - Tool Tray - Gas Cylinder Hand Truck
    2 Cylinders - Hoist Hook - Flat Free Tires - Rear Casters - Tool Tray - Gas Cylinder Hand Truck
    USA Safety Model#: HT3549FFFS
    Hand truck capacity: 2
    Cylinder diameters supported: Up to 12" diameter
    Lifting hook weight capacity: 600 lbs
    Hand truck dimensions (WxDxH): 32"w x 20"d x 68"h

    Cylinder hand truck Features:
    • Hook attachment for transport with hoist rigs
    • Clamping posts to secure cylinders at any angle
    • 10.5" diameter flat free urethane filled tires
    • Includes tray to hold torch/tools
    • 3" diameter rear casters
    • UFC, NFPA, CGA, & OSHA compliant
    • Dual ball bearings on welded steel hubs
    • 7 and 11 gauge hot rolled steel construction of base and supports
    • 14 gauge and heavier tube framing
    • Zero lift height loading, perimeter braced, eases loading and improves safety
    • 54" long x 1.5" wide, lab tested cinch straps for each cylinder
    • Powder-coat painted for durability
    • Made in the USA using American steel and labor
    $1,295.00
  43. 2 Cylinders - Firewall - Flat Free Tires - Welding Cart
    2 Cylinders - Firewall - Flat Free Tires - Welding Cart
    USA Safety Model#: HT3952FFFS
    Welding cart capacity: 2 cylinders
    Cylinder diameters supported: Up to 12.5" (fuel) & 10" (oxygen)
    Weight capacity: 600 lbs
    Welding cart dimensions (WxDxH): 32"w x 24"d x 60"h

    Cylinder Torch Cart Features:
    • 10.5" diameter flat free urethane filled wheels
    • 1" thick Marinite I™ lab certified fire barrier material encased in steel plate shell
    • UFC, NFPA, CGA, & OSHA compliant
    • Dual ball bearings on welded steel hubs
    • 7 and 11 gauge hot rolled steel construction of base and supports
    • 14 gauge and heavier tube framing
    • Zero lift height loading, perimeter braced, eases loading and improves safety
    • 54" long x 1.5" wide, lab tested cinch straps for each cylinder
    • Cylinder firewall cart is powder-coat painted for durability
    • Made in the USA using American steel and labor
    $1,295.00
  44. 2 Cylinders - Hoist Hook - Rear Casters - Tool Tray - Gas Cylinder Hand Truck
    2 Cylinders - Hoist Hook - Rear Casters - Tool Tray - Gas Cylinder Hand Truck
    USA Safety Model#: HT3549FS
    Hand truck capacity: 2
    Cylinder diameters supported: Up to 12" diameter
    Lifting hook weight capacity: 600 lbs
    Hand truck dimensions (WxDxH): 32"w x 20"d x 68"h

    Cylinder hand truck Features:
    • Hook attachment for transport with hoist rigs
    • Clamping posts to secure cylinders at any angle
    • 10.5" diameter four-ply fully pneumatic wheels
    • Includes tray to hold torch/tools
    • 3" diameter rear casters
    • UFC, NFPA, CGA, & OSHA compliant
    • Dual ball bearings on welded steel hubs
    • 7 and 11 gauge hot rolled steel construction of base and supports
    • 14 gauge and heavier tube framing
    • Zero lift height loading, perimeter braced, eases loading and improves safety
    • 54" long x 1.5" wide, lab tested cinch straps for each cylinder
    • Powder-coat painted for durability
    • Made in the USA using American steel and labor
    $1,340.00
  45. 2 Cylinders - Firewall - Welding Cart
    2 Cylinders - Firewall - Welding Cart
    USA Safety Model#: HT3952FS
    Welding cart capacity: 2 cylinders
    Cylinder diameters supported: Up to 12.5" (fuel) & 10" (oxygen)
    Weight capacity: 700 lbs
    Welding cart dimensions (WxDxH): 32"w x 24"d x 60"h

    Cylinder Torch Cart Features:
    • 10.5" diameter four-ply fully pneumatic wheels
    • 1" thick Marinite I™ lab certified fire barrier material encased in steel plate shell
    • UFC, NFPA, CGA, & OSHA compliant
    • Dual ball bearings on welded steel hubs
    • 7 and 11 gauge hot rolled steel construction of base and supports
    • 14 gauge and heavier tube framing
    • Zero lift height loading, perimeter braced, eases loading and improves safety
    • 54" long x 1.5" wide, lab tested cinch straps for each cylinder
    • Cylinder firewall cart is powder-coat painted for durability
    • Made in the USA using American steel and labor
    $1,350.00
  46. 2 Cylinders - Hoist Hook - Heavy Duty - Gas Cylinder Dolly
    2 Cylinders - Hoist Hook - Heavy Duty - Gas Cylinder Dolly
    USA Safety Model#: HT3591FS
    Dolly capacity: 2 cylinders
    Cylinder diameters supported: Up to 12" diameter
    Lifting hook weight capacity: 600 lbs
    Dolly dimensions (WxDxH): 35"w x 24"d x 68"h

    Cylinder Dolly Features:
    • Hook attachment for transport with hoist rigs
    • Clamping posts to secure cylinders at any angle
    • 16" diameter four-ply fully pneumatic speed rated wheels
    • UFC, NFPA, CGA, & OSHA compliant
    • Dual ball bearings on welded steel hubs
    • 7 and 11 gauge hot rolled steel construction of base and supports
    • 14 gauge and heavier tube framing
    • Zero lift height loading, perimeter braced, eases loading and improves safety
    • 54" long x 1.5" wide, lab tested cinch straps for each cylinder
    • Powder-coat painted for durability
    • Made in the USA using American steel and labor
    $1,360.00
  47. 1 Cryogenic Tank (20" Dewar) - Wide - Positioning Wheels - Tilt Hook - Gas Cylinder Dolly
    1 Cryogenic Tank (20" Dewar) - Wide - Positioning Wheels - Tilt Hook - Gas Cylinder Dolly
    USA Safety Model#: GCLCT126WSC
    Capacity: 1 cylinder
    Cylinder diameters supported: 20" (160, 180, 200 Liter)
    Weight capacity: 900 lbs
    Cart dimensions (WxDxH): 26"w x 25"d x 63"h

    Cart Features:
    • Wide design for more stable transport
    • 4 wheels allows the cylinder to be easily moved
    • Two 12" pneumatic wheels (12"x4")
    • Two 6" swivel casters (6"x2")
    • Two small positioning wheels (5"x2")
    • Heavy duty steel cylinder lift hook
    • Durable powder coated finish
    • Industrial, medical and commercial use
    • Use with gases like oxygen, nitrogen, carbon dioxide, argon
    • Made in the USA
    $1,395.00
  48. 2 Cylinders - Firewall - Heavy Duty - Welding Cart
    2 Cylinders - Firewall - Heavy Duty - Welding Cart
    USA Safety Model#: HT3901FS
    Welding cart capacity: 2 cylinders
    Cylinder diameters supported: Up to 12.5" (fuel) & 10" (oxygen)
    Weight capacity: 1,000 lbs
    Welding cart dimensions (WxDxH): 35"w x 24"d x 60"h

    Torch Cart Features:
    • 16" diameter four-ply fully pneumatic speed rated wheels
    • 1" thick Marinite I™ lab certified fire barrier material encased in steel plate shell
    • UFC, NFPA, CGA, & OSHA compliant
    • Dual ball bearings on welded steel hubs
    • 7 and 11 gauge hot rolled steel construction of base and supports
    • Gas torch cart built of 14 gauge and heavier tube framing
    • Zero lift height loading, perimeter braced, eases loading and improves safety
    • 54" long x 1.5" wide, lab tested cinch straps for each cylinder
    • Powder-paint painted for durability
    • Made in the USA using American steel and labor
    $1,430.00
  49. 2 Cylinders - Hoist Hook - Steel Wheels - Gas Cylinder Dolly
    2 Cylinders - Hoist Hook - Steel Wheels - Gas Cylinder Dolly
    USA Safety Model#: HT3587FS
    Dolly capacity: 2
    Cylinder diameters supported: Up to 12" diameter
    Lifting hook weight capacity: 600 lbs
    Dolly dimensions (WxDxH): 31"w x 26"d x 68"h

    Cylinder Dolly Features:
    • Hook attachment for transport with hoist rigs
    • Clamping posts to secure cylinders at any angle
    • 20" diameter steel main all-surface wheels
    • UFC, NFPA, CGA, & OSHA compliant
    • Dual ball bearings on welded steel hubs
    • 7 and 11 gauge hot rolled steel construction of base and supports
    • 14 gauge and heavier tube framing
    • Zero lift height loading, perimeter braced, eases loading and improves safety
    • 54" long x 1.5" wide, lab tested cinch straps for each cylinder
    • Powder-coat painted for durability
    • Made in the USA using American steel and labor
    $1,620.00
  50. 2 Cylinders - Firewall - Rear Casters - Welding Cart
    2 Cylinders - Firewall - Rear Casters - Welding Cart
    USA Safety Model#: HT3973FS
    Welding cart capacity: 2 cylinders
    Cylinder diameters supported: Up to 12.5" (fuel) & 10" (oxygen)
    Weight capacity: 1,000 lbs
    Welding cart dimensions (WxDxH): 35"w x 24"d x 61"h

    Firewall Torch Cart Features:
    • 16" diameter four-ply fully pneumatic speed rated wheels
    • 1" thick Marinite I™ lab certified fire barrier material encased in steel plate shell
    • 5" diameter rear casters
    • Welding cart is UFC, NFPA, CGA, & OSHA compliant
    • Dual ball bearings on welded steel hubs
    • 7 and 11 gauge hot rolled steel construction of base and supports
    • 14 gauge and heavier tube framing
    • Zero lift height loading, perimeter braced, eases loading and improves safety
    • 54" long x 1.5" wide, lab tested cinch straps for each cylinder
    • Powder-coat painted for durability
    • Made in the USA using American steel and labor
    $1,670.00
  51. 1 Cylinder - Manual Winch - Gas Cylinder Lift Truck
    1 Cylinder - Manual Winch - Gas Cylinder Lift Truck
    USA Safety Model#: GC260163WC
    Capacity: 1 cylinder
    Weight capacity: 300 lbs
    Cylinder diameters supported: Up to 9.5"
    Cart dimensions (WxDxH): 20"w x 29-1/4"d x 58"h

    Cart Features:
    • Manual winch with auto-brake feature
    • Lifts cylinder up to 40"
    • Platform in lowered position is 1/4" from ground
    • With winch handle in use overall depth is 33"
    • Four 5" wheels, two locking swivel
    • Platform dimension: 12"Wx20"D
    • Chains to secure cylinder
    • Industrial, medical and commercial use
    • Made in the USA
    $1,675.00
  52. 2 Cylinders - Firewall - Steel Wheels - Welding Cart
    2 Cylinders - Firewall - Steel Wheels - Welding Cart
    USA Safety Model#: HT3987FS
    Welding cart capacity: 2 cylinders
    Cylinder diameters supported: Up to 12.5" (fuel) & 10" (oxygen)
    Weight capacity: 700 lbs
    Welding cart dimensions (WxDxH): 32"w x 26"d x 60"h

    Cylinder Torch Cart Features:
    • 20" diameter steel main all-surface wheels
    • 1" thick Marinite I™ lab certified fire barrier material encased in steel plate shell
    • UFC, NFPA, CGA, & OSHA compliant
    • Firewall cart includes dual ball bearings on welded steel hubs
    • 7 and 11 gauge hot rolled steel construction of base and supports
    • 14 gauge and heavier tube framing
    • Zero lift height loading, perimeter braced, eases loading and improves safety
    • 54" long x 1.5" wide, lab tested cinch straps for each cylinder
    • Powder-coat painted for durability
    • Made in the USA using American steel and labor
    $1,750.00
  53. 1 Cryogenic Tank (26" Dewar) - Positioning Wheels - Tilt Hook - Gas Cylinder Dolly
    1 Cryogenic Tank (26" Dewar) - Positioning Wheels - Tilt Hook - Gas Cylinder Dolly
    USA Safety Model#: GCLCT1226SC
    Capacity: 1 cylinder
    Cylinder diameters supported: 26" (230 Liter)
    Weight capacity: 1,000 lbs
    Cart dimensions (WxDxH): 23"w x 25"d x 63"h

    Cart Features:
    • Compact design for easier access to tight areas
    • 4 wheels allows the cylinder to be easily moved
    • Two 12" pneumatic wheels (12"x4")
    • Two 6" swivel casters (6"x2")
    • Two small positioning wheels (5"x2")
    • Heavy duty steel cylinder lift hook
    • Durable powder coated finish
    • Industrial, medical and commercial use
    • Use with large industrial size dewars (26" diameter)
    • Made in the USA
    $1,850.00
  54. 2 Cylinders - Firewall - Hoist Hook - Heavy Duty - Welding Cart
    2 Cylinders - Firewall - Hoist Hook - Heavy Duty - Welding Cart
    USA Safety Model#: HT3991FS
    Welding cart capacity: 2 cylinders
    Cylinder diameters supported: Up to 12.5" (fuel) & 10" (oxygen)
    Weight capacity: 1,000 lbs
    Welding cart dimensions (WxDxH): 35"w x 24"d x 64"h

    Firewall Welding Cart Features:
    • Hook attachment for transport with hoist rigs
    • Clamping posts to secure cylinders at any angle
    • 16" diameter four-ply fully pneumatic speed rated wheels
    • 1" thick Marinite I™ lab certified fire barrier material encased in steel plate shell
    • Includes tray to hold torch/tools
    • UFC, NFPA, CGA, & OSHA compliant
    • Dual ball bearings on welded steel hubs
    • 7 and 11 gauge hot rolled steel construction of base and supports
    • Welding cart with firewall has 14 gauge and heavier tube framing
    • Zero lift height loading, perimeter braced, eases loading and improves safety
    • 54" long x 1.5" wide, lab tested cinch straps for each cylinder
    • Powder-coat painted for durability
    • Made in the USA using American steel and labor
    $1,860.00
  55. 1 Cylinder - Hydraulic Pump - Gas Cylinder Lift Truck
    1 Cylinder - Hydraulic Pump - Gas Cylinder Lift Truck
    USA Safety Model#: GC260161WC
    Capacity: 1 cylinder
    Cylinder diameters supported: Up to 9.5"
    Weight capacity: 300 lbs
    Cart dimensions (WxDxH): 20"w x 29-1/4"d x 54"h

    Cart Features:
    • Foot operated hydraulic pump to lift cylinder off ground
    • Lifts cylinder up to 40"
    • Platform in lowered position is 1/4" from ground
    • With jack pedal in use overall depth is 40"
    • Four 5" wheels, two locking swivel
    • Chain to secure cylinder
    • Industrial, medical and commercial use
    • Made in the USA
    $1,895.00
  56. 2 Cylinders - Firewall - Hoist Hook - Steel Wheels - Welding Cart
    2 Cylinders - Firewall - Hoist Hook - Steel Wheels - Welding Cart
    USA Safety Model#: HT3989FS
    Welding cart capacity: 2 cylinders
    Cylinder diameters supported: Up to 12.5" (fuel) & 10" (oxygen)
    Weight capacity: 700 lbs
    Welding cart dimensions (WxDxH): 32"w x 26"d x 64"h

    Cylinder Torch Cart Features:
    • Hook attachment for transport with hoist rigs
    • Welding cart with firewall has clamping posts to secure cylinders at any angle
    • 20" diameter steel main all-surface wheels
    • 1" thick Marinite I™ lab certified fire barrier material encased in steel plate shell
    • Includes tray to hold torch/tools
    • UFC, NFPA, CGA, & OSHA compliant
    • Dual ball bearings on welded steel hubs
    • 7 and 11 gauge hot rolled steel construction of base and supports
    • 14 gauge and heavier tube framing
    • Zero lift height loading, perimeter braced, eases loading and improves safety
    • 54" long x 1.5" wide, lab tested cinch straps for each cylinder
    • Powder-coat painted for durability
    • Made in the USA using American steel and labor
    $2,200.00
  57. 2 Cylinders - Firewall - Hoist Hook - Rear Casters - Heavy Duty - Welding Cart
    2 Cylinders - Firewall - Hoist Hook - Rear Casters - Heavy Duty - Welding Cart
    USA Safety Model#: HT3993FS
    Welding cart capacity: 2 cylinders
    Cylinder diameters supported: Up to 12.5" (fuel) & 10" (oxygen)
    Weight capacity: 1,000 lbs
    Welding cart dimensions (WxDxH): 35"w x 24"d x 64"h

    Firewall Welding Cart Features:
    • Hook attachment for transport with hoist rigs
    • Clamping posts to secure cylinders at any angle
    • 16" diameter four-ply fully pneumatic speed rated wheels
    • 1" thick Marinite I™ lab certified fire barrier material encased in steel plate shell
    • 5" diameter rear casters
    • Includes locking lid tool tray to hold torch/tools
    • UFC, NFPA, CGA, & OSHA compliant
    • Dual ball bearings on welded steel hubs
    • 7 and 11 gauge hot rolled steel construction of base and supports
    • Welding cart with firewall has 14 gauge and heavier tube framing
    • Zero lift height loading, perimeter braced, eases loading and improves safety
    • 54" long x 1.5" wide, lab tested cinch straps for each cylinder
    • Powder-coat painted for durability
    • Made in the USA using American steel and labor
    $2,250.00
  58. 1 Cryogenic Tank (20" Dewar) - Powered Gas Cylinder Dolly
    1 Cryogenic Tank (20" Dewar) - Powered Gas Cylinder Dolly
    USA Safety Model#: GC210131PDWC
    Capacity: 1 cylinder
    Cylinder diameters supported: 20" (160, 180, 200 Liter)
    Weight capacity: 1,000 lbs
    Cart dimensions (WxDxH): 28"w x 40"d x 49"h

    Cryogenic Tank Cart Features:
    • Battery-powered drive rear wheel
    • Max speed with full charge 1.7 mph (2.5 fps) (no load)
    • Speed control is adjustable from 0 to 1.7 mph
    • 5 mile range
    • Automatic Dead Man Break engages if handle is released
    • Automatic emergency safety switch instantly reverses direction if bumped
    • Low profile design for easier loading and unloading
    • Made from heavy duty structural steel and schedule 40 pipe
    • Cylinder remains vertical during transport
    • Two 10" polyurethane wheels on front
    • Quick release nylon ratchet strap to secure cylinder to cart
    • Durable powder coated finish
    • Industrial, medical and commercial use
    • Made in the USA
    $3,995.00
  59. 1 Cryogenic Tank (20" Dewar) - Positioning Wheels - Tilt Hook - Gas Cylinder Dolly
    1 Cryogenic Tank (20" Dewar) - Positioning Wheels - Tilt Hook - Gas Cylinder Dolly
    USA Safety Model#: GCLCT126SC
    Capacity: 1 cylinder
    Cylinder diameters supported: 20" (160, 180, 200 Liter)
    Weight capacity: 900 lbs
    Cart dimensions (WxDxH): 20"w x 25"d x 63"h

    Cart Features:
    • Narrow design for easier access to tight areas
    • 4 wheels allows the cylinder to be easily moved
    • Two 12" pneumatic wheels (12"x4")
    • Two 6" swivel casters (6"x2")
    • Two small positioning wheels (5"x2")
    • Heavy duty steel cylinder lift hook
    • Durable powder coated finish
    • Industrial, medical and commercial use
    • Use with gases like oxygen, nitrogen, carbon dioxide, argon
    • Made in the USA
    Out of stock
  60. 1 Cryogenic Tank (20" Dewar) - Hydraulic Pump - Gas Cylinder Lift Truck
    1 Cryogenic Tank (20" Dewar) - Hydraulic Pump - Gas Cylinder Lift Truck
    USA Safety Model#: GC240250WC
    Capacity: 1 cylinder
    Weight capacity: 1,000 lbs
    Cylinder diameters supported: Maximum of 20" (160, 180, 200 Liter)
    Cart dimensions (WxDxH): 29-3/4"w x 44-3/4"d x 66-1/4"h

    Cart Features:
    • Foot operated hydraulic pump to lift cylinder off ground
    • Lifts tank from 54" (lowered hook) to 71"H (raised hook)
    • Made from heavy duty structural steel and schedule 40 pipe
    • Cylinder remains vertical during transport
    • Two 10" wheels and one 8" wheel with swivel lock
    • 2" polyester web ratchet tightening belt to secure cylinder
    • Industrial, medical and commercial use
    • Made in the USA
    Out of stock
  61. 1 Cryogenic Tank (20" Dewar) - Hydraulic Pump - Hand Brake - Gas Cylinder Lift Truck
    1 Cryogenic Tank (20" Dewar) - Hydraulic Pump - Hand Brake - Gas Cylinder Lift Truck
    USA Safety Model#: GC240251WC
    Capacity: 1 cylinder
    Weight capacity: 1,000 lbs
    Cylinder diameters supported: Up to 20" (160, 180, 200 Liter)
    Cart dimensions (WxDxH): 29-3/4"w x 44-3/4"d x 66-1/4"h

    Cart Features:
    • Foot operated hydraulic pump to lift cylinder off ground
    • Lifts tank from 54" (lowered hook) to 71"H (raised hook)
    • Hand controlled brakes
    • Made from heavy duty structural steel and Schedule 40 pipe
    • Cylinder remains vertical during transport
    • Two rigid 10"x2.5" polyurethane wheels and one 8"x2" caster with swivel lock
    • 2" Ratchet tightening belt to secure cylinder
    • Industrial, medical and commercial use
    • Made in the USA
    Out of stock

61 Items

per page
Set Descending Direction
Clear All