|
1 Cylinder - Wall Mount - Gas Cylinder Bracket
USA Safety Model# GB100FS
Status: In stock
Shipping: This product ships in 3-7 business days. A
UPS tracking # will be sent to you upon shipment
Cylinder wall bracket capacity: 1 cylinder
Cylinder wall bracket strength: 1,200 PSI
Diameters supported: 4"-12"
Cylinder wall bracket dimensions: 4.25" x 8" x 2.25"
Features:
Includes 1.5" steel cinch buckle and polypropylene strap (54" long)
Cylinder wall bracket constructed from eleven gauge hot rolled steel
Quality powder paint finish for durability and chemical resistance
Edges protected with steel reinforced vinyl edge guarding
A chain set can be added to this cylinder wall bracket (optional)
Cylinder wall bracket ships UPS
Made in the USA |
|
Price: $20.99
 |  |
|
|
|
1 Cylinder - Wall Mount - Adjustable - Gas Cylinder Bracket
USA Safety Model# GB110FS
Status: In stock
Shipping: This product ships in 3-7 business days. A
UPS tracking # will be sent to you upon shipment
Cylinder bracket capacity: 1 cylinder
Diameters supported: 4"-14"
Cylinder bracket dimensions: 4" x 9" x 2"
Features:
Cylinder bracket mounts to wall permanently using fasteners
Gas cylinder bracket molded from reinforced polypropylene
Support acetylene, argon, butane, carbon dioxide (CO2), helium, hydrogen, nitrogen and other cylinders
Snugly support cylinder using adjustable strap
Strap and security chain sets included
Cylinder bracket ships UPS
Made in the USA |
|
Price: $23.00
| |
|
|
|
Benchtop Bottle Holder - Laboratory (LB) Size - PVC - 1 Bottle
USA Safety Model# LB700FS
Cylinder capacity: 1
Cylinder diameters: 2"
Product dimensions: 5" x 8" x 8"
Features:
Sized to fit LB style (2" diameter) bottles
PVC construction units are durable and chemical resistant
Formed heavy PVC walls chemically welded
Stand has 4 bench mounting holes for optional permanent installation
Made in the USA |
|
Price: $31.00
| |
|
|
|
1 Cylinder - Bench Mount - Gas Cylinder Bracket
USA Safety Model# GB150FS
Status: In stock
Shipping: This product ships in 3-7 business days. A
UPS tracking # will be sent to you upon shipment
Cylinder bracket capacity: 1 cylinder
Diameters supported: 4"-14"
Cylinder bracket dimensions: 4.25" x 8" x 4.25"
Features: Clamps to bench or table tops from 3/8" to 1 3/4" thick Cylinder clamp useful where walls inaccessible or when temporary supports required Dual mounting posts with swivel feet & non-slip pads to clamp Constructed from 11 gauge hot rolled steel Requires 1 1/2" of bench top to securely clamp bracket Standard strap set Optional chain set addition Cylinder bracket ships UPS Made in the USA |
|
Price: $39.15
| |
|
|
|
1 Cylinder - Wall Mount - Stainless Steel - Gas Cylinder Bracket
USA Safety Model# GB100SSFS
Status: In stock
Shipping: This product ships in 3-7 business days. A
UPS tracking # will be sent to you upon shipment
Cylinder capacity: 1
Strength: 1,200 PSI
Diameters supported: 4"-12"
Product dimensions: 4.25" x 8" x 2.25"
Features: Constructed from 12 gauge Type 304 stainless steel 1.5" polypropylene strap (54" long) and nylon cinch buckle Quality powder paint finish for long service life & chemical resistance Edges protected with steel reinforced vinyl edge guarding Optional chain set addition Ships UPS Made in the USA |
|
Price: $49.95
| |
|
|
|
2 Cylinders - Wall Mount - Gas Cylinder Bracket
USA Safety Model# GB200FS
Status: In stock
Shipping: This product ships in 3-7 business days. A
UPS tracking # will be sent to you upon shipment
Cylinder restraint capacity: 1-2 cylinders
Cylinder restraint strength: 1,200 PSI
Diameters supported: 4"-12"
Cylinder restraint dimensions: 4.25" x 24" x 2.25"
Features: Cylinder restraint constructed from 11 gauge hot rolled steel 1.5" polypropylene strap (54" long) and steel cinch buckle Quality powder paint finish for long service life and chemical resistance Cylinder restraint edges protected with steel reinforced vinyl edge guarding Optional chain set addition Cylinder restraint ships UPS Made in the USA |
|
Price: $51.25
| |
|
|
|
Laboratory Bottle Ring Stand - 1 Bottle
USA Safety Model# LB837FS
Cylinder capacity: 1
Cylinder diameters: 5"-6.75"
Product dimensions: 11" x 11" x 7"
Features:
Ring Stand for medium gas cylinders (5"-6.75")
4 nylon set screws
Made in the USA |
|
Price: $59.50
| |
|
|
|
3 Cylinders - Wall Mount - Gas Cylinder Bracket
USA Safety Model# GB300FS
Status: In stock
Shipping: This product ships in 3-7 business days. A
UPS tracking # will be sent to you upon shipment
Cylinder support capacity: 1-3 cylinders
Cylinder support strength: 1,200 PSI
Diameters supported: 4"-12"
Gas cylinder support dimensions: 4.25" x 36" x 2.25"
Features: Gas cylinder support bracket made using 11 gauge hot rolled steel 1.5" polypropylene strap (54" long) and steel cinch buckle Powder paint finish for durability & chemical resistance Cylinder support edges protected with steel reinforced vinyl edge guarding Optional chain set addition Cylinder support bracket ships UPS Made in the USA |
|
Price: $62.00
| |
|
|
|
1 Cylinder - Bench Mount - Stainless Steel - Gas Cylinder Bracket
USA Safety Model# GB150SSFS
Status: In stock
Shipping: This product ships in 3-7 business days. A
UPS tracking # will be sent to you upon shipment
Cylinder capacity: 1
Diameters supported: 4"-14"
Product dimensions: 4.25" x 8" x 4.25"
Features: Clamps to bench or table tops from 3/8" to 1 3/4" thick Useful where walls inaccessible or when temporary supports required Dual mounting posts with swivel feet & non-slip pads to clamp Constructed from 12 gauge Type 304 steel Requires 1 1/2" of bench top to secure bracket Standard strap set Optional chain set addition Ships UPS Made in the USA |
|
Price: $77.50
| |
|
|
|
Bottle Carrier - Laboratory (LB) Size - PVC - 6 Bottles
USA Safety Model# LB760FS
Cylinder capacity: 1-6
Cylinder diameters: 2"
Product dimensions: 9" x 6" x 19"
Features:
Product serves as transport and storage for up to 6 bottles
Sized to fit LB style (2" diameter) bottles
PVC construction units are durable and chemical resistant
Formed heavy PVC walls and loop handle chemically welded
Stand has 4 bench mounting holes for optional permanent installation
Made in the USA |
|
Price: $89.00
| |
|
|
|
4 Cylinders - Wall Mount - Gas Cylinder Bracket
USA Safety Model# GB401FS
Status: In stock
Shipping: This product ships in 3-7 business days. A
UPS tracking # will be sent to you upon shipment
Cylinder capacity: 1-4
Strength: 1,200 PSI
Diameters supported: 4"-12"
Product dimensions: 4.25" x 48" x 2.25"
Features: Constructed from 11 gauge hot rolled steel 1.5" polypropylene strap (54" long) and steel cinch buckle Quality powder paint finish for long service life & chemical resistance Edges protected with steel reinforced vinyl edge guarding Optional chain set addition Ships UPS Made in the USA |
|
Price: $89.90
| |
|
|
|
Lockable Cylinder Safety Cap - Snap Cap
USA Safety Model# SC2500FS
Product Dimensions: 5" x 5" x 8"
Features:
Designed to fit most North American gas cylinders
Meets DOT standards
Choose high/low pressure, fine/coarse thread
Welded steel construction
Powder coated for durability and long life
Includes brass padlock
Made in the USA |
|
Price: $99.00
| |
|
|
|
2 Cylinders - Wall Mount - Stainless Steel - Gas Cylinder Bracket
USA Safety Model# GB200SSFS
Status: In stock
Shipping: This product ships in 3-7 business days. A
UPS tracking # will be sent to you upon shipment
Cylinder capacity: 1-2
Strength: 1,200 PSI
Diameters supported: 4"-12"
Product dimensions: 4.25" x 24" x 2.25"
Features: Constructed from 12 gauge Type 304 stainless steel 1.5" polypropylene strap (54" long) and nylon cinch buckle Quality powder paint finish for long service life & chemical resistance Edges protected with steel reinforced vinyl edge guarding Optional chain set addition Ships UPS Made in the USA |
|
Price: $109.00
| |
|
|
|
1 Cylinder - Gas Cylinder Dolly
USA Safety Model# HT901FS
Status: In stock
Shipping: This product ships in 3-7 business days. A
UPS tracking # will be sent to you upon shipment
Cylinder capacity: 1
Weight capacity: 300 lbs
Diameters supported: Up to 12"
Product dimensions: 18" x 18" x 47"
Features:
8" steel hub welded semi-pneumatic wheels
3/16" steel supports and round steel tube
Constructed from 11 gauge HR steel
Polypropylene strap and cinch buckle
Fully welded construction
Quality powder paint finish for long service life
Ships UPS oversize rate
Industrial, medical and commercial use
Made in the USA |
|
Price: $139.00
| |
|
|
|
1 Cylinder - Gas Cylinder Stand
USA Safety Model# GR181FS
Cylinder capacity: 1
Cylinder diameters: 4" - 10"
Cylinder stand dimensions: 16" x 16" x 15"
Features:
Fully welded cylinder stand
Can be used for both commercial and industrial purposes
Seven gauge (.187" thick) steel bar
Powder paint finish for durability
Polypropylene cinch buckle and strap
Equipment protected by steel reinforced vinyl edge guards
Constructed from eleven gauge and heavier plate steel
Made in the USA |
|
Price: $149.50
| |
|
|
|
2 Cylinders - Gas Cylinder Stand
USA Safety Model# GR275FS
Cylinder capacity: 1-2
Cylinder diameters: Up to 12"
Cylinder stand dimensions: 12" x 28" x 30"
Features:
Polypropylene strap and cinch buckle
Cylinder stand fully welded
Quality powder paint finish for long service life
Steel reinforced vinyl edge guards protect equipment
Constructed from 11 gauge and heavier plate steel
Chain sets can be added for secondary support
Industrial and commercial use
Made in the USA |
|
Price: $164.00
| |
|
|
|
1 Cylinder - Heavy Duty - Gas Cylinder Dolly
USA Safety Model# HT902FS
Status: In stock
Shipping: This product ships in 3-7 business days. A
UPS tracking # will be sent to you upon shipment
Cylinder capacity: 1
Weight capacity: 700 lbs
Diameters supported: Up to 12"
Product dimensions: 18" x 19" x 47"
Features:
10.5" fully pneumatic wheels
3/16" steel supports and round steel tube
Constructed from 11 gauge HR steel
Polypropylene strap and cinch buckle
Fully welded construction
Quality powder paint finish for long service life
Ships UPS oversize rate
Industrial, medical and commercial use
Made in the USA |
|
Price: $179.00
| |
|
|
|
2 Cylinders - Gas Cylinder Dolly
USA Safety Model# HT952FS
Status: In stock
Shipping: This product ships in 3-7 business days. A
UPS tracking # will be sent to you upon shipment
Cylinder capacity: 2
Cylinder diameter: Up to 12"
Product dimensions: 20" x 31.5" x 47"
Features:
10.5" fully pneumatic wheels
3/16" steel supports and round steel tube
Constructed from 11 and 10 gauge HR steel
Polypropylene strap and cinch buckle
Fully welded construction
Quality powder paint finish for long service life
Ships UPS oversize rate
Made in the USA |
|
Price: $225.00
| |
|
|
|
3 Cylinders - Gas Cylinder Stand
USA Safety Model# GR375FS
Cylinder capacity: 1-3
Cylinder diameters: Up to 12"
Cylinder stand dimensions: 12" x 40" x 30"
Features:
Industrial and commercial use cylinder stand
1.5" Polypropylene strap and cinch buckle
Store acetylene, argon, butane, carbon dioxide (CO2), helium, hydrogen and nitrogen cylinders
Fully welded construction
Quality powder paint finish for long service life
Steel reinforced vinyl edge guards protect equipment
Constructed from 11 gauge and heavier plate steel
Chain sets can be added for secondary support
Process control version also available
Made in the USA
Cylinder stand ships UPS oversized rate or truck |
|
Price: $239.00
| |
|
|
|
1 Cylinder - 4 Wheels - Gas Cylinder Hand Truck
USA Safety Model# HT903FS
Status: In stock
Shipping: This product ships in 3-7 business days. A
UPS tracking # will be sent to you upon shipment
Cylinder capacity: 1
Weight capacity: 700 lbs
Diameters supported: Up to 12"
Product dimensions: 19" x 19" x 47"
Features:
8" semi-pneumatic wheels
Swing-down steel carriages for use of rear swivel casters
3/16" steel supports and round steel tube
Constructed from 11 gauge HR steel
Polypropylene strap and cinch buckle
Fully welded construction
Quality powder paint finish for long service life
Ships UPS oversize rate
Industrial, medical and commercial use
Made in the USA |
|
Price: $249.00
| |
|
|
|
1 Cylinder - Truck Transport - Gas Cylinder Stand
USA Safety Model# GR2175FS
Cylinder capacity: 1
Cylinder diameters: 4"-10"
Cylinder stand dimensions:21" x 19" x 36"
Features:
Polypropylene strap and cinch buckle
Cylinder stand has fully welded construction
Quality powder paint finish for long service life
Steel reinforced vinyl edge guards protect equipment
Constructed from 11 gauge and heavier plate steel
Chain sets can be added for secondary support
Vise-like holding capability of the cylinder locking ring system
Use of safety cylinder caps (Models SC2500FS or DOT standard caps)
Ideal system for over-the-road cylinder transportation
Specify high or low pressure for correct locking ring size
Industrial and commercial use
Made in the USA |
|
Price: $245.00
| |
|
|
|
2 Cylinders - Process Station - Gas Cylinder Rack
USA Safety Model# PR277FS
Cylinder capacity: 1-2
Cylinder diameters: Up to 12"
Cylinder rack dimensions: 12" x 28" x 72"
Features:
1.5" Polypropylene strap and cinch buckle
Cylinder rack has fully welded construction
Quality epoxy powder paint finish for long service life
Steel reinforced vinyl edge guards protect equipment
Constructed from 11 gauge and heavier plate steel
Elevated panel (28" by 14") allows for mounting of cylinder controls, cross-over devices, etc.
Chain sets can be added for secondary support
Unit ships partially disassembled for freight savings & ease of use
Can be shipped UPS
Industrial and commercial use
Made in the USA |
|
Price: $249.00
| |
|
|
|
2 Cylinders - Truck Transport - Gas Cylinder Stand
USA Safety Model# GR2275FS
Cylinder capacity: 1-2
Cylinder diameters: 4"-10"
Cylinder stand dimensions: 40" x 14" x 36"
Features:
Polypropylene strap and cinch buckle
Cylinder stand has fully welded construction
Quality powder paint finish for long service life
Steel reinforced vinyl edge guards protect equipment
Constructed from 11 gauge and heavier plate steel
Chain sets can be added for secondary support
Vise-like holding capability of the cylinder locking ring system
Use of safety cylinder caps (Models G-2501-2504 or DOT standard caps)
Ideal system for over-the-road cylinder transportation
Specify high or low pressure for correct locking ring size
Industrial and commercial use
Made in the USA |
|
Price: $260.00
| |
|
|
|
2 Cylinders - Heavy Duty - Gas Cylinder Dolly
USA Safety Model# HT991FS
Status: In stock
Shipping: This product ships in 3-7 business days. A
UPS tracking # will be sent to you upon shipment
Cylinder capacity: 2
Cylinder diameter: Up to 12"
Product dimensions: 24" x 32" x 47"
Features:
16" fully pneumatic wheels
3/16" steel supports and round steel tube
Constructed from 11 gauge HR steel
Polypropylene strap and cinch buckle
Fully welded construction
Quality powder paint finish for long service life
Ships UPS oversize rate
Made in the USA |
|
Price: $269.00
| |
|
|
|
1 Cylinder - 4 Wheels - Heavy Duty - Gas Cylinder Hand Truck
USA Safety Model# HT904FS
Status: In stock
Shipping: This product ships in 3-7 business days. A
UPS tracking # will be sent to you upon shipment
Cylinder capacity: 1
Weight capacity: 1,000 lbs
Diameters supported: Up to 12"
Cylinder hand truck dimensions: 19" x 21" x 47"
Features:
Swing-down steel carriages for use of rear swivel casters
Gas cylinder hand truck has 10" fully pneumatic wheels
3/16" steel supports and round steel tube
Constructed from 11 gauge HR steel
Polypropylene strap and cinch buckle
Fully welded construction
Quality powder paint finish for long service life
Ships UPS oversize rate
Industrial, medical and commercial use
Made in the USA |
|
Price: $269.00
| |
|
|
|
4 Cylinders - Gas Cylinder Stand
USA Safety Model# GR400FS
Cylinder capacity: 1-4
Diameters supported: Up to 12"
Cylinder rack dimensions: 24" x 40" x 30"
Features:
Cylinder rack has 1.5" Polypropylene strap and cinch buckle
Fully welded construction
Quality powder paint finish for long service life
Steel reinforced vinyl edge guards protect equipment
Constructed from 11 gauge and heavier plate steel
Steel chains can be added for secondary support
Dual straps support each cyinder
Ships partially assembled for UPS shipping capability
Industrial and commercial use
Made in the USA |
|
Price: $299.00
| |
|
|
|
2 Cylinders - Industrial Environment - Welding Cart
USA Safety Model# HT987FS
Status: In stock
Shipping: This product ships in 3-7 business days. A
UPS tracking # will be sent to you upon shipment
Cylinder capacity: 2
Cylinder diameter: Up to 12.375"
Product dimensions: 26" x 31" x 47"
Features:
For use in industrial and welding environments
20" welded steel wheels
Specially configured to use with fuel/oxygen bottle combinations
3/16" steel supports and round steel tube
Constructed from 11 gauge HR steel
Polypropylene strap and cinch buckle
Fully welded construction
Quality powder paint finish for long service life
Ships UPS oversize rate or truck freight
Made in the USA |
|
Price: $339.00
| |
|
|
|
2 Cylinders - 4 Wheels - Gas Cylinder Hand Truck
USA Safety Model# HT953FS
Status: In stock
Shipping: This product ships in 3-7 business days. A
UPS tracking # will be sent to you upon shipment
Cylinder capacity: 2
Cylinder diameter: Up to 10"
Cylinder hand truck dimensions: 20" x 31.5" x 47"
Features:
10.5" fully pneumatic wheels
Transport acetylene, argon, butane, carbon dioxide (CO2), helium, hydrogen and nitrogen cylinders
3" fold-away rear casters
3/16" steel supports and round steel tube
Constructed from 11 gauge HR steel
Polypropylene strap and cinch buckle
Fully welded construction
Quality powder paint finish for long service life
Made in the USA
Hand truck ships UPS oversize rate |
|
Price: $315.00
| |
|
|
|
1 Cylinder (1x1) - Barricade - Gas Cylinder Rack
USA Safety Model# BR1X1FS
Cylinder capacity: 1
Diameters supported: Up to 12"
Cylinder rack dimensions: 16" x 16" x 30"
Features:
Cylinder rack is UFC, NFPA, CGA, OSHA & Seismic Zone 4 compliant
2" square steel tube continuously seam welded
Two levels of welded steel chains
Snaps for each cylinder
Sealed with exterior grade powder paint
Indoor or outdoor bulk cylinder storage
Industrial and commercial use
Made in the USA |
|
Price: $369.00
| |
|
|
|
6 Cylinders - Gas Cylinder Stand
USA Safety Model# GR600FS
Cylinder capacity: 1-6
Diameters supported: Up to 12"
Product dimensions: 24" x 52" x 30"
Features:
1.5" Polypropylene strap and cinch buckle
Fully welded construction
Quality powder paint finish for long service life
Steel reinforced vinyl edge guards protect equipment
Constructed from 11 gauge and heavier plate steel
Chain sets can be added for secondary support
Process control version also available
Ship UPS oversized rate (partially disassembled for freight savings)
Industrial and commercial use
Made in the USA |
|
Price: $409.00
| |
|
|
|
2 Cylinders (1x2) - Barricade - Gas Cylinder Rack
USA Safety Model# BR1X2FS
Cylinder capacity: 1-2
Diameters supported: Up to 12"
Cylinder rack dimensions: 16" x 26" x 30"
Features:
Cylinder rack meets or exceeds UFC, NFPA, CGA, OSHA, & Seismic Zone 4 requirements
2" square steel tube continuously seam welded
Two levels of welded steel chains
Snaps for each cylinder
Sealed with exterior grade powder paint
Indoor or outdoor bulk cylinder storage
Made in the USA |
|
Price: $449.00
| |
|
|
|
2 Cylinders - Forklift - Gas Cylinder Pallet
USA Safety Model# GP251FS
Cylinder capacity: 1-2
Cylinder diameters: 6"-12"
Product dimensions: 24" x 24" x 32"
Features:
Two-way, fully enclosed, full length (2" X 7.75") forklift channels
Steel construction
Nylon strap and steel buckles for each cylinder
Tie-down loops for securing units in transport
Quality powder paint finish for long service life & chemical resistance |
|
Price: $452.00
| |
|
|
|
8 Cylinders - Gas Cylinder Stand
USA Safety Model# GR800FS
Cylinder capacity: 1-8
Diameters supported: Up to 12"
Product dimensions: 24" x 64.5" x 30"
Features:
1.5" Polypropylene strap and cinch buckle
Fully welded construction
Quality powder paint finish for long service life
Steel reinforced vinyl edge guards protect equipment
Constructed from 11 gauge and heavier plate steel
Chain sets can be added for secondary support
Process control version also available
Ship UPS oversized rate
Industrial and commercial use
Made in the USA |
|
Price: $475.00
| |
|
|
|
1 Cylinder - Caddy(tm) Gas Cylinder Lifting Hand Truck
USA Safety Model# HT2000FS
Cylinder capacity: 1
Weight capacity: 1,000 lbs
Diameters supported: Up to 12"
Product dimensions: 20" x 22" x 48"
Features:
Lift & transport cylinders to install on welding carts, platforms & pallets
11" manual lift
Fully pneumatic wheels
Swing-down steel carriages for use of rear swivel casters
Fully welded construction
Quality powder paint finish for long service life
Ships UPS oversize rate
Industrial, medical and commercial use
Patented
Made in the USA |
|
Price: $479.95
| |
|
|
|
3 Cylinders (1x3) - Barricade - Gas Cylinder Rack
USA Safety Model# BR1X3FS
Cylinder capacity: 1-3
Diameters supported: Up to 12"
Cylinder rack dimensions: 16" x 38" x 30"
Features:
Units meet or exceed UFC, NFPA, CGA, OSHA, & Seismic Zone 4 requirements
2" square steel tube continuously seam welded
Two levels of welded steel chains
Snaps for each cylinder
Sealed with exterior grade powder paint
Indoor or outdoor bulk cylinder storage
Made in the USA |
|
Price: $520.00
| |
|
|
|
2 Cylinders (2x1) - Barricade - Gas Cylinder Rack
USA Safety Model# BR2X1FS
Cylinder capacity: 1-2
Diameters supported: Up to 12"
Cylinder rack dimensions: 30" x 16" x 30"
Features:
Gas cylinder rack meets or exceeds UFC, NFPA, CGA, OSHA, & Seismic Zone 4 requirements
2" square steel tube continuously seam welded
Two levels of welded steel chains
Snaps for each cylinder
Cylinder rack sealed with exterior grade powder paint
Indoor or outdoor bulk cylinder storage
Made in the USA |
|
Price: $520.00
| |
|
|
|
1 Cylinder (1x1) - Barricade - Cryo 22" - Gas Cylinder Rack
USA Safety Model# BR1x1CRYO22
Cylinder capacity: 1
Diameters supported: 18"-22"
Product dimensions: 28" x 26" x 40"
Features:
UFC, NFPA, CGA, OSHA & Seismic Zone 4 compliant
Typically used for cryogenic gases
2 levels of welded and steel chains
Snaps to secure cylinder
2" square steel, seam-welded tube surrounds cylinders
Tube sealed with exterior grade powder paint
Indoor or outdoor bulk cylinder storage
Industrial and commercial use
Made in the USA |
|
Price: $550.00
| |
|
|
|
3 Cylinders (3x1) - Barricade - Gas Cylinder Rack
USA Safety Model# BR3X1FS
Cylinder capacity: 1-3
Diameters supported: Up to 12"
Cylinder rack dimensions: 44" x 16" x 30"
Features:
Unit meets or exceeds UFC, NFPA, CGA, OSHA, & Seismic Zone 4 requirements
2" square steel tube continuously seam welded
Cylinder rack includes two levels of welded steel chains
Snaps for each cylinder
Sealed with exterior grade powder paint
Indoor or outdoor bulk cylinder storage
Made in the USA |
|
Price: $589.00
| |
|
|
|
4 Cylinders (1x4) - Barricade - Gas Cylinder Rack
USA Safety Model# BR1X4FS
Cylinder capacity: 1-4
Diameters supported: Up to 12"
Cylinder rack dimensions: 16" x 50" x 30"
Features:
Units meet or exceed UFC, NFPA, CGA, OSHA, & Seismic Zone 4 requirements
2" square steel tube continuously seam welded
Two levels of welded steel chains
Snaps for each cylinder
Gas cylinder rack sealed with exterior grade powder paint
Indoor or outdoor bulk cylinder storage
Made in the USA |
|
Price: $592.00
| |
|
|
|
4 Cylinders - Forklift - Gas Cylinder Pallet
USA Safety Model# GP451FS
Cylinder capacity: 1-4
Cylinder diameters: 6"-12"
Cylinder pallet dimensions: 24" x 36" x 34"
Features:
Cylinder pallet made of steel construction
Full length (2" X 7.75") forklift channels
Transport acetylene, argon, butane, carbon dioxide (CO2), helium, hydrogen and nitrogen cylinders
Tie-down loops for securing units in transport
Quality powder paint finish for long service life & chemical resistance
Pallet includes nylon strap and steel buckles for each cylinder |
|
Price: $599.00
| |
|
|
|
4 Cylinders - Heavy Duty - Gas Cylinder Cart
USA Safety Model# GC430FS
Cylinder capacity: 1-4
Cylinder diameter: Up to 12"
Product dimensions: 24" x 40" x 31"
Features:
Two 4" locking swivel casters and two rigid casters
3/16" steel supports and round steel tube
Constructed from 11 gauge HR steel
1.5" polypropylene straps and cinch buckles
Fully welded construction
For industrial & commercial use
Quality powder paint finish for long service life
Ships fully welded and assembled ready-to-use
Made in the USA |
|
Price: $620.00
| |
|
|
|
4 Cylinders - Truck Transport - Forklift - Gas Cylinder Pallet
USA Safety Model# GP2008FS
Cylinder capacity: 1-4
Cylinder diameters: 6"-23"
Product dimensions: 24" x 36" x 36"
Features:
Fits 4 cylinders (300 CFT capacity) or 1 cryogenic cylinder (23") or combination of smaller cylinders
End-loaded orientation for easy loading onto smaller truck beds
Two-say, fully enclosed forklift channels (2" X 7.75")
One 10,000 lb rated ratchet strap (included) attaches at one of 3 different heights
Steel construction
Tie-down loops for securing units in transport
Quality powder paint finish for long service life & chemical resistance |
|
Price: $639.00
| |
|
|
|
4 Cylinders (2x2) - Barricade - Gas Cylinder Rack
USA Safety Model# BR2X2FS
Cylinder capacity: 1-4
Diameters supported: Up to 12"
Cylinder rack dimensions: 30" x 26" x 30"
Features:
Cylinder rack meets or exceeds UFC, NFPA, CGA, OSHA, & Seismic Zone 4 requirements
2" square steel tube continuously seam welded
Two levels of welded steel chains
Gas cylinder rack includes snaps for each cylinder
Sealed with exterior grade powder paint
Indoor or outdoor bulk cylinder storage
Made in the USA |
|
Price: $640.00
| |
|
|
|
6 Cylinders - Heavy Duty - Gas Cylinder Cart
USA Safety Model# GC630FS
Cylinder capacity: 1-6
Cylinder diameter: Up to 12"
Product dimensions: 24" x 52" x 30"
Features:
Two 4" locking swivel casters and two 4" rigid casters
3/16" steel supports and round steel tube
Constructed from 11 gauge HR steel
1.5" polypropylene straps and cinch buckles
Fully welded construction
For industrial & commercial use
Quality powder paint finish for long service life
Ships fully welded and assembled ready-to-use
Made in the USA |
|
Price: $649.00
| |
|
|
|
2 Cylinders (2x1) - Barricade - Cryo 22" - Gas Cylinder Rack
USA Safety Model# BR2x1CRYO22
Cylinder capacity: 1-2
Diameters supported: 18-22"
Product dimensions: 54" x 26"x 40"
Features:
UFC, NFPA, CGA, OSHA, & Seismic Zone compliant
Typically used for cryogenic gases
2 levels of welded and steel chains
Snaps to secure cylinder
2" square steel, seam-welded tube surrounds cylinders
Tube sealed with exterior grade powder paint
Typical 2 week lead time on this product
Industrial and commercial use
Made in the USA |
|
Price: $689.00
| |
|
|
|
6 Cylinders (2x3) - Barricade - Gas Cylinder Rack
USA Safety Model# BR2X3FS
Cylinder capacity: 1-6
Diameters supported: Up to 12"
Cylinder storage rack dimensions: 30" x 38" x 30"
Features:
UFC, NFPA, CGA, OSHA, & Seismic Zone 4 compliant
Store acetylene, argon, butane, carbon dioxide (CO2), helium, hydrogen and nitrogen cylinders
2" square steel tube continuously seam welded
Two levels of welded steel chains
Snaps for each cylinder
Sealed with exterior grade powder paint
Indoor or outdoor bulk gas cylinder storage
Made in the USA |
|
Price: $689.00
| |
|
|
|
6 Cylinders (3x2) - Barricade - Gas Cylinder Rack
USA Safety Model# BR3X2FS
Cylinder capacity: 1-6
Diameters supported: Up to 12"
Product dimensions: 44" x 26" x 30"
Features:
UFC, NFPA, CGA, OSHA, & Seismic Zone 4 compliant
2" square steel tube continuously seam welded
Two levels of welded steel chains
Snaps for each cylinder
Sealed with exterior grade powder paint
Indoor or outdoor bulk cylinder storage
Made in the USA |
|
Price: $697.00
| |
|
|
|
1 Cylinder (1x1) - Barricade - Cryo 33" - Gas Cylinder Rack
USA Safety Model# BR1x1CRYO33
Cylinder capacity: 1
Diameters supported: 18-33"
Cylinder rack dimensions: 38" x 36" x 40"
Features:
Cylinder rack is UFC, NFPA, CGA, OSHA & Seismic Zone 4 compliant
Typically used for cryogenic gases
2 levels of welded and steel chains
Snaps to secure cylinder
2" square steel, seam-welded tube surrounds cylinders
Tube sealed with exterior grade powder paint
Typical 2 week lead time on this product
Indoor or outdoor bulk cylinder storage
Industrial and commercial use
Made in the USA |
|
Price: $729.00
| |
|
|
|
1 Cylinder - Hoist Hook - Heavy Duty - Gas Cylinder Dolly
USA Safety Model# HT3502FS
Status: In stock
Shipping: This product ships in 3-7 business days. A
UPS tracking # will be sent to you upon shipment
Cylinder capacity: 1
Cylinder diameters supported: Up to 12" diameter
Product dimensions: 20" x 21" x 70"
Weight capacity: 700 lbs
Features:Hook attachment for transport with hoist rigs
Clamping posts to secure cylinders at any angle
10.5" diameter four-ply fully pneumatic speed rated wheels
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder painted for durability
Made in the USA using American steel and labor |
|
Price: $398.00
| |
|
|
|
6 Cylinders - Forklift - Gas Cylinder Pallet
USA Safety Model# GP651FS
Cylinder capacity: 1-6
Cylinder diameters: 6"-12"
Product dimensions: 24" x 36" x 32"
Features:
Full length (2" X 7.75") forklift channels
Steel construction
Nylon strap and steel buckles for each cylinder
Tie-down loops for securing units in transport
Quality powder paint finish for long service life & chemical resistance |
|
Price: $739.00
| |
|
|
|
2 Cylinders - Hoist Hook - Heavy Duty - Gas Cylinder Dolly
USA Safety Model# HT3591FS
Status: In stock
Shipping: This product ships in 3-7 business days. A
UPS tracking # will be sent to you upon shipment
Cylinder capacity: 2
Cylinder diameters supported: Up to 12" diameter
Product dimensions: 24" x 37" x 70"
Weight capacity: 1,000 lbs
Features:Hook attachment for transport with hoist rigs
Clamping posts to secure cylinders at any angle
16" diameter four-ply fully pneumatic speed rated wheels
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder painted for durability
Made in the USA using American steel and labor |
|
Price: $699.00
| |
|
|
|
4 Cylinders (4x1) - Barricade - Gas Cylinder Rack
USA Safety Model# BR4X1FS
Cylinder capacity: 1-4
Diameters supported: Up to 12"
Product dimensions: 58" x 16" x 30"
Features:
UFC, NFPA, CGA, OSHA, & Seismic Zone 4 compliant
2" square steel tube continuously seam welded
Two levels of welded steel chains
Snaps for each cylinder
Sealed with exterior grade powder paint
Indoor or outdoor bulk cylinder storage
Made in the USA |
|
Price: $765.00
| |
|
|
|
2 Cylinders - Hoist Hook - Industrial Environment - Gas Cylinder Dolly
USA Safety Model# HT3587FS
Status: In stock
Shipping: This product ships in 3-7 business days. A
UPS tracking # will be sent to you upon shipment
Cylinder capacity: 2
Cylinder diameters supported: Up to 12" diameter
Product dimensions: 20" x 31.5" x 70"
Weight capacity: 1,000 lbs
Features:Hook attachment for transport with hoist rigs
Clamping posts to secure cylinders at any angle
20" diameter steel main all-surface wheels
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder painted for durability
Made in the USA using American steel and labor |
|
Price: $495.00
| |
|
|
|
2 Cylinders (2x1) - Barricade - Cryo 33" - Gas Cylinder Rack
USA Safety Model# BR2x1CRYO33
Cylinder capacity: 1-2
Diameters supported: 18-33"
Product dimensions: 74" x 36" x 40"
Features:
UFC, NFPA, CGA, OSHA & Seismic Zone 4 compliant
Typically used for cryogenic gases
2 levels of welded and steel chains
Snaps to secure cylinder
2" square steel, seam-welded tube surrounds cylinders
Tube sealed with exterior grade powder paint
Typical 2 week lead time on this product
Industrial and commercial use
Made in the USA |
|
Price: $859.00
| |
|
|
|
2 Cylinders - Firewall - Welding Cart
USA Safety Model# HT3952FS
Cylinder capacity: 2
Cylinder diameters supported: Up to 12.5" (fuel) & 10" (oxygen)
Product dimensions: 32" x 36" x 60"
Weight capacity: 700 lbs
Features:10.5" diameter four-ply fully pneumatic speed rated wheels
1" thick Marinite I™ lab certified fire barrier material encased in steel plate shell
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder painted for durability
Made in the USA using American steel and labor |
|
Price: $769.00
| |
|
|
|
2 Cylinders - Hoist Hook - 4 Wheels - Gas Cylinder Hand Truck
USA Safety Model# HT3553FS
Status: In stock
Shipping: This product ships in 3-7 business days. A
UPS tracking # will be sent to you upon shipment
Cylinder capacity: 2
Cylinder diameters supported: Up to 12" diameter
Product dimensions: 20" x 31.5" x 70"
Weight capacity: 1,000 lbs
Features:Hook attachment for transport with hoist rigs
Clamping posts to secure cylinders at any angle
10.5" diameter four-ply fully pneumatic speed rated wheels
3" diameter rear castersUFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder painted for durability
Made in the USA using American steel and labor |
|
Price: $659.00
| |
|
|
|
2 Cylinders - Firewall - Heavy Duty - Welding Cart
USA Safety Model# HT3901FS
Cylinder capacity: 2
Cylinder diameters supported: Up to 12.5" (fuel) & 10" (oxygen)
Product dimensions: 32" x 36" x 60"
Weight capacity: 1,000 lbs
Features:16" diameter four-ply fully pneumatic speed rated wheels
1" thick Marinite I™ lab certified fire barrier material encased in steel plate shell
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder painted for durability
Made in the USA using American steel and labor |
|
Price: $865.00
| |
|
|
|
2 Cylinders - Hoist Hook - 4 Wheels - Tool Tray - Gas Cylinder Hand Truck
USA Safety Model# HT3549FS
Status: In stock
Shipping: This product ships in 3-7 business days. A
UPS tracking # will be sent to you upon shipment
Cylinder capacity: 2
Cylinder diameters supported: Up to 12" diameter
Product dimensions: 20" x 31.5" x 70"
Weight capacity: 1,000 lbs
Features:Hook attachment for transport with hoist rigs
Clamping posts to secure cylinders at any angle
10.5" diameter four-ply fully pneumatic speed rated wheels
Includes tray to hold torch/tools
3" diameter rear castersUFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder painted for durability
Made in the USA using American steel and labor |
|
Price: $735.00
| |
|
|
|
8 Cylinders (2x4) - Barricade - Gas Cylinder Rack
USA Safety Model# BR2X4FS
Cylinder capacity: 1-8
Diameters supported: Up to 12"
Product dimensions: 30" x 50" x 30"
Features:
Units meet or exceed UFC, NFPA, CGA, OSHA, & Seismic Zone 4 requirements
2" square steel tube continuously seam welded
Two levels of welded steel chains
Snaps for each cylinder
Sealed with exterior grade powder paint
Indoor or outdoor bulk cylinder storage
Made in the USA |
|
Price: $788.00
| |
|
|
|
2 Cylinders - Firewall - Hoist Hook - Industrial Environment - Welding Cart
USA Safety Model# HT3989FS
Cylinder capacity: 2
Cylinder diameters supported: Up to 12.5" (fuel) & 10" (oxygen)
Product dimensions: 32 x 36" x 64"
Weight capacity: 700 lbs
Features:Hook attachment for transport with hoist rigs
Clamping posts to secure cylinders at any angle
20" diameter steel main all-surface wheels
1" thick Marinite I™ lab certified fire barrier material encased in steel plate shell
Includes tray to hold torch/tools
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder painted for durability
Made in the USA using American steel and labor |
|
Price: $979.00
| |
|
|
|
14 Cylinders - Truck Transport - Forklift - Gas Cylinder Pallet
USA Safety Model# GP2014FS
Cylinder capacity: 1-14
Cylinder diameters: 6"-23"
Product dimensions: 32" x 48" x 36"
Features:
Fits 14 cylinders (300 CFT capacity) or 2 cryogenic cylinders (23") or combination of smaller cylinders
End-loaded orientation for easy loading onto smaller truck beds
Two-say, fully enclosed forklift channels (2" X 7.75")
One 10,000 lb rated ratchet strap (included) attaches at one of 3 different heights
Steel construction
Tie-down loops for securing units in transport
Quality powder paint finish for long service life & non-skid surface |
|
Price: $788.00
| |
|
|
|
2 Cylinders - Firewall - 4 Wheel - Welding Cart
USA Safety Model# HT3973FS
Cylinder capacity: 2
Cylinder diameters supported: Up to 12.5" (fuel) & 10" (oxygen)
Product dimensions: 32" x 36" x 61"
Weight capacity: 1,000 lbs
Features:16" diameter four-ply fully pneumatic speed rated wheels
1" thick Marinite I™ lab certified fire barrier material encased in steel plate shell
5" diameter rear castersUFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder painted for durability
Made in the USA using American steel and labor |
|
Price: $1,070.00
| |
|
|
|
2 Cylinders - Firewall - Industrial Environment - Welding Cart
USA Safety Model# HT3987FS
Cylinder capacity: 2
Cylinder diameters supported: Up to 12.5" (fuel) & 10" (oxygen)
Product dimensions: 32" x 36" x 60"
Weight capacity: 700 lbs
Features:20" diameter steel main all-surface wheels
1" thick Marinite I™ lab certified fire barrier material encased in steel plate shell
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder painted for durability
Made in the USA using American steel and labor |
|
Price: $849.00
| |
|
|
|
4 Cylinders - In-Line - Gas Cylinder Stand
USA Safety Model# GR475FS
Cylinder capacity: 1-4
Cylinder diameters: Up to 12"
Features:
Polypropylene strap and cinch buckle
Fully welded construction
Quality powder paint finish for long service life
Steel reinforced vinyl edge guards protect equipment
Constructed from 11 gauge and heavier plate steel
Chain sets can be added for secondary support
Industrial and commercial use
Made in the USA |
|
Price: $375.00
| |
|
|
|
21 Cylinders - Truck Transport - Forklift - Gas Cylinder Pallet
USA Safety Model# GP2020FS
Cylinder capacity: 1-21
Cylinder diameters: 6"-23"
Product dimensions: 48" x 48" x 36"
Features:
Fits 21 cylinders (300 CFT capacity) or 4 cryogenic cylinders (23") or combinations of smaller cylinders
End-loaded orientation for easy loading onto smaller truck beds
Two-say, fully enclosed forklift channels (2" X 7.75")
One 10,000 lb rated ratchet strap (included) attaches at one of 3 different heights
Welded from 11 gauge steel with tubular steel supports
Tie-down loops for securing units in transport
Quality powder paint finish for long service life & non-skid surface |
|
Price: $812.00
| |
|
|
|
9 Cylinders (3x3) - Barricade - Gas Cylinder Rack
USA Safety Model# BR3X3FS
Cylinder capacity: 1-9
Diameters supported: Up to 12"
Product dimensions: 44" x 40" x 30"
Features:
UFC, NFPA, CGA, OSHA, & Seismic Zone 4 compliant
2" square steel tube continuously seam welded
Two levels of welded steel chains
Snaps for each cylinder
Sealed with exterior grade powder paint
Indoor or outdoor bulk cylinder storage
Made in the USA |
|
Price: $839.00
| |
|
|
|
8 Cylinders (4x2) - Barricade - Gas Cylinder Rack
USA Safety Model# BR4X2FS
Cylinder capacity: 1-8
Diameters supported: Up to 12"
Product dimensions: 58" x 26" x 30"
Features:
Units meet or exceed UFC, NFPA, CGA, OSHA, & Seismic Zone 4 requirements
2" square steel tube continuously seam welded
Two levels of welded steel chains
Snaps for each cylinder
Sealed with exterior grade powder paint
Indoor or outdoor bulk cylinder storage
Made in the USA |
|
Price: $945.00
| |
|
|
|
12 Cylinders (3x4) - Barricade - Gas Cylinder Rack
USA Safety Model# BR3X4FS
Cylinder capacity: 1-12
Diameters supported: Up to 12"
Product dimensions: 44" x 50" x 30"
Features:
UFC, NFPA, CGA, OSHA, & Seismic Zone 4 compliant
2" square steel tube continuously seam welded
Two levels of welded steel chains
Snaps for each cylinder
Sealed with exterior grade powder paint
Indoor or outdoor bulk cylinder storage
Made in the USA |
|
Price: $997.00
| |
|
|
|
2 Cylinders - Firewall - Hoist Hook - Heavy Duty - Welding Cart
USA Safety Model# HT3991FS
Cylinder capacity: 2
Cylinder diameters supported: Up to 12.5" (fuel) & 10" (oxygen)
Product dimensions: 32" x 36" x 64"
Weight capacity: 1,000 lbs
Features:Hook attachment for transport with hoist rigs
Clamping posts to secure cylinders at any angle
16" diameter four-ply fully pneumatic speed rated wheels
1" thick Marinite I™ lab certified fire barrier material encased in steel plate shell
Includes tray to hold torch/tools
UFC, NFPA, CGA, & OSHA compliant
Dual ball bearings on welded steel hubs
7 and 11 gauge hot rolled steel construction of base and supports
14 gauge and heavier tube framing
Zero lift height loading, perimeter braced, eases loading and improves safety
54" long x 1.5" wide, lab tested cinch straps for each cylinder
Powder painted for durability
Made in the USA using American steel and labor |
|
Price: $989.00
| |
|
|
|
12 Cylinders (4x3) - Barricade - Gas Cylinder Rack
USA Safety Model# BR4X3FS
Cylinder capacity: 1-12
Diameters supported: Up to 12"
Product dimensions: 58" x 40" x 30"
Features:
UFC, NFPA, CGA, OSHA, & Seismic Zone 4 compliant
2" square steel tube continuously seam welded
Two levels of welded steel chains
Snaps for each cylinder
Sealed with exterior grade powder paint
Indoor or outdoor bulk cylinder storage
Made in the USA |
|
Price: $1,289.00
| |
|
|
|
16 Cylinders (4x4) - Barricade - Gas Cylinder Rack
USA Safety Model# BR4X4FS
Cylinder capacity: 1-16
Diameters supported: Up to 12"
Product dimensions: 58" x 50" x 30"
Features:
UFC, NFPA, CGA, OSHA & Seismic Zone 4 compliant
2" square steel tube continuously seam welded
Two levels of welded steel chains
Snaps for each cylinder
Sealed with exterior grade powder paint
Indoor or outdoor bulk cylinder storage
Made in the USA |
|
Price: $1,520.00
| |
|
|
|
4 Cylinders - Propane and Small Tanks - Vertical Storage - Mesh - Gas Cylinder Cabinet
USA Safety Model# CBCW330JP
Cylinder capacity: 4 cylinders (20-43 lb)
Product dimensions: 30" x 30" x 35" (WxDxH)
Features:
Propane cylinders 12" dia. x 22-1/2" H store in vertical position
Meets OSHA 1910 standard
Lockable door(s) with slide bolt hasp (lock not included)
Mesh sides and door allow visibility into cabinet
13 gauge flattened mesh sides
14 gauge top and shelves
1 1/2" x 3/16" thick corner angles
Foot pads with pre-drilled holes
Powder coated (safety yellow) for durability
Safety signage in large red letters
All welded and ready to use |
|
Price: $375.00
| |
|
|
|
12 Cylinders - Propane and Small Tanks - Vertical Storage - Mesh - Gas Cylinder Cabinet
USA Safety Model# CBCA080JP
Cylinder capacity:
12 cylinders (20-43 lb) of 12.5" diameter
8 cylinders (20-43 lb) of 14.5" diameter
Product dimensions: 33" x 38" x 70" (WxDxH)
Features:
Meets OSHA 1910 standard
Lockable door(s) with slide bolt hasp (lock not included)
Mesh sides and door allow visibility into cabinet
13 gauge flattened mesh sides
14 gauge top and shelves
1 1/2" x 3/16" thick corner angles
Foot pads with pre-drilled holes
Powder coated (safety yellow) for durability
Safety signage in large red letters
All welded and ready to use |
|
Price: $595.00
| |
|
|
|
8 Cylinders - Propane and Small Tanks - Horizontal Storage - Mesh - Gas Cylinder Cabinet
USA Safety Model# CBCH080JP
Cylinder capacity: 8 cylinders (20-43 lb)
Product dimensions: 33" x 38" x 70" (WxDxH)
Features:
Meets OSHA 1910 standard
Lockable door(s) with slide bolt hasp (lock not included)
Mesh sides and door allow visibility into cabinet
13 gauge flattened mesh sides
14 gauge top and shelves
1 1/2" x 3/16" thick corner angles
Foot pads with pre-drilled holes
Powder coated (safety yellow) for durability
Safety signage in large red letters
All welded and ready to use |
|
Price: $595.00
| |
|
|
|
20 Cylinders - Large Tanks - Vertical Storage - Mesh - Gas Cylinder Cabinet
USA Safety Model# CBCV102JP
Cylinder capacity: Up to 20 cylinders of 9.25" diameter or equivalent combination
Product dimensions: 60" x 38" x 70" (WxDxH)
Features:
Meets OSHA 1910 standard
Lockable door(s) with slide bolt hasp (lock not included)
Adjustable safety retention chains
Mesh sides and door allow visibility into cabinet
13 gauge flattened mesh sides
14 gauge top and shelves
1 1/2" x 3/16" thick corner angles
Foot pads with pre-drilled holes
Powder coated (safety yellow) for durability
Safety signage in large red letters
All welded and ready to use |
|
Price: $815.00
| |
|
|
|
8 Horizontal and 10 Vertical Cylinders - Small and Large Tanks - Mesh - Gas Cylinder Cabinet
USA Safety Model# CBCX100JP
Cylinder capacity:
Vertical cabinet component: Up to 10 cylinders of 9.25" diameter or equivalent combination
Horizontal cabinet component: Up to 8 cylinders (20-43 lb)
Product dimensions: 62" x 38" x 70" (WxDxH)
Features:
Meets OSHA 1910 standard
Lockable door(s) with slide bolt hasp (lock not included)
Adjustable safety retention chains
Mesh sides and door allow visibility into cabinet
13 gauge flattened mesh sides
14 gauge top and shelves
1 1/2" x 3/16" thick corner angles
Foot pads with pre-drilled holes
Powder coated (safety yellow) for durability
Safety signage in large red letters
All welded and ready to use |
|
Price: $885.00
| |
|
|
|
4 Cylinders - Large Tanks - Vertical Storage - Panel - Gas Cylinder Cabinet
USA Safety Model# CB5004FS
Cylinder capacity: Up to 4 cylinders of 9.25" diameter or equivalent combination
Product dimensions: 24" x 26" x 72"
Features: Welded chains includedOSHA, UFC, NFPA, & CGA compliant
Fully welded structural steel frames
Solid panel roof
Laser cut panel walls and doors
Internally braced for structural stability
Powder painted for durability
Made in the USA using American steel and labor |
|
Price: $1,158.00
| |
|
|
|
6 Cylinders - Large Tanks - Vertical Storage - Panel - Gas Cylinder Cabinet
USA Safety Model# CB5006FS
Cylinder capacity: Up to 6 cylinders of 9.25" diameter or equivalent combination
Product dimensions: 24" x 36" x 72"
Features: Welded chains includedOSHA, UFC, NFPA, & CGA compliant
Fully welded structural steel frames
Solid panel roof
Laser cut panel walls and doors
Internally braced for structural stability
Powder painted for durability
Made in the USA using American steel and labor |
|
Price: $1,265.00
| |
|
|
|
4 Cylinders - Forklift Base - Large Tanks - Vertical Storage - Panel - Gas Cylinder Cabinet
USA Safety Model# CB5504FS
Cylinder capacity: Up to 4 cylinders of 9.25" diameter or equivalent combination
Product dimensions: 24" x 26" x 76"
Features: Includes forklift base (3 x 7.75" openings)Ratchet straps includedOSHA, UFC, NFPA, & CGA compliant
Fully welded structural steel frames
Solid panel roof
Laser cut panel walls and doors
Internally braced for structural stability
Powder painted for durability
Made in the USA using American steel and labor |
|
Price: $1,315.00
| |
|
|
|
6 Cylinders - Forklift Base - Large Tanks - Vertical Storage - Panel - Gas Cylinder Cabinet
USA Safety Model# CB5506FS
Cylinder capacity: Up to 6 cylinders of 9.25" diameter or equivalent combination
Product dimensions: 24" x 36" x 76"
Features: Includes forklift base (3 x 7.75" openings)Ratchet straps includedOSHA, UFC, NFPA, & CGA compliant
Fully welded structural steel frames
Solid panel roof
Laser cut panel walls and doors
Internally braced for structural stability
Powder painted for durability
Made in the USA using American steel and labor |
|
Price: $1,418.00
| |
|
|
|
4 Cylinders - Hoist Hook - Forklift Base - Large Tanks - Vertical Storage - Panel - Gas Cylinder Cabinet
USA Safety Model# CB5504LFS
Cylinder capacity: Up to 4 cylinders of 9.25" diameter or equivalent combination
Product dimensions: 28" x 26" x 78"
Features:Hook attachment for transport with hoist rigs
Includes forklift base (3 x 7.75" openings)Ratchet straps includedOSHA, UFC, NFPA, & CGA compliant
Fully welded structural steel frames
Solid panel roof
Laser cut panel walls and doors
Internally braced for structural stability
Powder painted for durability
Made in the USA using American steel and labor |
|
Price: $1,532.00
| |
|
|
|
20 Cylinders - Large Tanks - Vertical Storage - Panel - Gas Cylinder Cabinet
USA Safety Model# CB5020FS
Cylinder capacity: Up to 20 cylinders of 9.25" diameter or equivalent combination
Product dimensions: 48" x 48" x 72"
Features: Welded chains includedOSHA, UFC, NFPA, & CGA compliant
Fully welded structural steel frames
Solid panel roof
Laser cut panel walls and doors
Internally braced for structural stability
Powder painted for durability
Made in the USA using American steel and labor |
|
Price: $1,826.00
| |
|
|
|
Replacement 54" Strap Assembly
USA Safety Model# GB100AFS
Cylinder capacity: 1
Strength: 1,200 lbs
Features:
Enable quick and secure mounting of cylinders
Nickel plated steel spring buckle system
1.5" polypropylene webbing
This is a replacement component and should never be used as a stand alone cylinder restraint
Made in the USA |
|
Price: $6.95
| |
|
|
|
Optional Chain Set - All Brackets
USA Safety Model# GB105FS
Features:
41" long
Welded chain set
#1/0 heavy gauge with twisted loop
Includes bit snap for easy chain connection
For use with wall and bench mounted cylinder brackets, cylinder stands (2-8 cylinders), racks, process stations, and cylinder carts
This is an add-on product and should never be used as a stand alone cylinder restraint
Made in the USA |
|
Price: $6.95
| |
|
|
