Skip to Content
The store will not work correctly when cookies are disabled.
JavaScript seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Javascript in your browser.
4 Cylinders Wide - Cylinder Racks and Stands
12 Cylinders - Oxygen & Medical Gases (D,E) - Red - Cylinder Rack
USA Safety Model#: GRMDE12SRSC
Cylinder capacity: 12
Supported cylinder sizes: D, E (4.5" diameter)
Rack dimensions (WxDxH):
23.5"w
x
17"d x 21"h
Oxygen Tank Rack Features:
Holds oxygen and other medical gas tanks
5" square cylinder opening
Cylinders are kept off of ground 0.25"
All-welded steel construction
Pre-drilled 1/2" holes in flat iron base
Powder coated red finish
Made in the USA
24 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Rack
USA Safety Model#: GRMDE24SSC
Cylinder capacity: 24
Supported cylinder sizes: D, E (4.5" diameter)
Rack dimensions (WxDxH):
34"w
x
21.5"d x 21"h
Medical Tank Rack Features:
Holds oxygen and other medical gas tanks
5" square cylinder opening
Cylinders are kept off of ground 0.25"
All-welded steel construction
Pre-drilled 1/2" holes in flat iron base
Powder coated green finish
Made in the USA
4 Cylinders - In-Line - Gas Cylinder Stand
USA Safety Model#: GR475FS
Stand capacity: 1-4 cylinders
Cylinder diameters: Up to 12"
Stand dimensions (WxDxH):
52"w
x
14"d x 30"h
Cylinder Stand Features:
OSHA, NFPA (UFC) & CGA compliant
Polypropylene strap and cinch buckle
Fully welded construction
Quality powder-coat paint finish for long service life
Steel reinforced vinyl edge guards protect equipment
Constructed from 11 gauge and heavier plate steel
A chain set (Model # GB105FS ) can be added to this product (optional)
Compressed gas cylinder stand for industrial and commercial use
Mounts to the floor, pre-drilled holes accommodates 3/8" anchor bolts
Made in the USA
36 Cylinders - Oxygen & Medical Gases (D,E) - Green - Cylinder Rack
USA Safety Model#: GRMDE36SSC
Cylinder capacity: 36
Supported cylinder sizes: D, E (4.5" diameter)
Rack dimensions (WxDxH):
49"w
x
21.5"d x 21"h
Medical Tank Rack Features:
Holds oxygen and other medical gas tanks
5" square cylinder opening
Cylinders are kept off of ground 0.25"
All-welded steel construction
Pre-drilled 1/2" holes in flat iron base
Powder coated green finish
Made in the USA
8 Cylinders - Basic - Gas Cylinder Rack
USA Safety Model#: GRCR8SC
Cylinder capacity: 8
Cylinder diameters supported: Up to 9.5"
Cylinder rack dimensions (WxDxH):
44.5"w
x
21.5"d x 36.25"h
Cylinder Storage Rack Features:
Fully welded 1.5" steel tube
Holds up to 8 cylinders up to 9.5" in diameter
Two chains included
Pre-drilled 0.5" floor mounting holes on flat iron base
Finished with black powder paint
Industrial and commercial use
Made in the USA
16 Propane Tanks (33 LB) - Horizontal Storage - Steel - Gas Cylinder Rack
USA Safety Model#: GR16402MAAM
Cabinet capacity: 16 cylinders (33 lb) of 12.5" diameter
Propane Tank Rack dimensions (WxDxH):
58"w
x
27"d x 50"h
Gas Cylinder Rack Features:
Frame and shelf made from galvannealed steel
Pre-drilled holes (13/16") for anchoring each foot pad
Powder coated with outdoor grade paint for extra durability
Ships assembled ready for use
Product bolts together and can be disassembled
Made in the USA
8 Cylinders - Gas Cylinder Stand
USA Safety Model#: GR800FS
Stand capacity: 1-8 cylinders
Diameters supported: Up to 12"
Stand dimensions (WxDxH):
56"w
x
23"d x 30"h
Gas Cylinder Stand Features:
OSHA, NFPA (UFC) & CGA compliant
1.5" Polypropylene strap and cinch buckle
Fully welded construction
Quality powder-coat paint finish for long service life
Steel reinforced vinyl edge guards protect equipment
Constructed from 11 gauge and heavier plate steel
Designed to mount to floor with four fasteners
A chain set (Model # GB105FS ) can be added to this product (optional)
Process control version also available
Industrial and commercial use
Made in the USA
4 Cylinders - In Line Process Station - Gas Cylinder Rack
USA Safety Model#: PR477FS
Cylinder capacity: 1-4
Cylinder diameters: Up to 12"
Cylinder rack dimensions (WxDxH):
52"w
x
14"d x 72"h
Cylinder Stand Features:
OSHA, NFPA (UFC) & CGA compliant
Color: Standard stock is medical white; Option for industrial gray
1.5" Polypropylene strap and cinch buckle
Cylinder rack has fully welded construction
Quality epoxy powder paint finish for long service life
Steel reinforced vinyl edge guards protect equipment
Constructed from 11 gauge and heavier plate steel
Two levels of Unistrut provide regulator and control device mounting stations
A chain set (Model # GB105FS ) can be added to this product (optional)
Unit ships ready to use by truck
Industrial and commercial use
Made in the USA
4 Cylinders (4x1) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR4X1FS
Cylinder capacity: 1-4
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
58"w
x
16"d x 30"h
Gas Cylinder Storage Rack Features:
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
2" square steel tube continuously seam welded, 0.125" thick
Holds four cylinders, four wide by one deep
Two levels of welded steel chains
Snaps for each cylinder
5 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
8 Cylinders (4x2) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR4X2FS
Cylinder capacity: 1-8
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
58"w
x
26"d x 30"h
Gas Cylinder Storage Rack Features:
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
2" square steel tube continuously seam welded, 0.125" thick
Holds eight cylinders, four wide by two deep
Two levels of welded steel chains
Snaps for each cylinder
10 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
12 Cylinders - Hoist Hook & Lifting Eyes - Forkliftable - Cylinder Cradle Rack
USA Safety Model#: CCC12FLSC
Cylinder capacity: 12
Cylinder diameters supported: Up to 9.5 (200-300 cu ft)
Weight Capacity: 2,950 lbs
Cylinder rack dimensions (WxDxH):
33"w
x
43"d x 77"h
Cylinder Storage Rack Features:
Holds up to 12 cylinders of up to 9.5" in diameter
Security bars bolt to frame to secure cylinders
4 lifting eyes and center hoist hook
Top mounted two-way forklift pockets
Open base for pallet jack or forklift movement
3/16" steel floor plate
Finished with 5 stage powder coat, black
Industrial and commercial use
Outdoor or indoor use
Made in the USA
4 Cylinders (4x1) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR4X1PSFS
Cylinder capacity: 1-4
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
58"w
x
16"d x 72"h
Gas Cylinder Storage Rack Features:
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
2" square steel tube continuously seam welded, 0.125" thick
Holds two cylinders, one wide by two deep
Two levels of welded steel chains
5 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Gas cylinder rack includes snaps for each cylinder
Sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
8 Cylinders (4x2) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR4X2PSFS
Cylinder capacity: 1-8
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
58"w
x
26"d x 72"h
Gas Cylinder Storage Rack Features:
Cylinder rack meets USGS high seismic hazard zone requirements when installed properly
Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
2" square steel tube continuously seam welded
Holds eight cylinders, four wide by two deep
Two levels of welded steel chains
10 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Gas cylinder rack includes snaps for each cylinder
Sealed with exterior grade powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
12 Cylinders (4x3) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR4X3FS
Cylinder capacity: 1-12
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
58"w
x
38"d x 30"h
Gas Cylinder Storage Rack Features:
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
2" square steel tube continuously seam welded, 0.125" thick
Holds twelve cylinders, four wide by three deep
Two levels of welded steel chains
Snaps for each cylinder
10 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
16 Cylinders - Hoist Hook - Forklift Base - Cylinder Cradle Rack
USA Safety Model#: CCP16SC
Cylinder capacity: 16
Cylinder diameters supported: Up to 9.5 (200-300 cu ft)
Weight Capacity: 4,500 lbs
Cylinder rack dimensions (WxDxH):
46"w
x
35.5"d x 83"h
Cylinder Storage Rack Features:
Holds up to 16 cylinders of up to 9.5" diameter
Security bars bolt to frame to secure cylinders
Center hoist eye
4-way forklift base
3/16" steel floor plate
Finished with 5 stage powder coat color, black
Industrial and commercial use
Outdoor or indoor use
Made in the USA
16 Cylinders (4x4) - Barricade - Gas Cylinder Rack
USA Safety Model#: BR4X4FS
Cylinder capacity: 1-16
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
58"w
x
50"d x 30"h
Gas Cylinder Storage Rack Features:
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
2" square steel tube continuously seam welded, 0.125" thick
Holds sixteen cylinders, four wide by four deep
Two levels of welded steel chains
Snaps for each cylinder
10 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
12 Cylinders (4x3) - Barricade - Process Station - Gas Cylinder Rack
USA Safety Model#: BR4X3PSFS
Cylinder capacity: 1-12
Cylinder diameters supported: Up to 12"
Cylinder rack dimensions (WxDxH):
58"w
x
38"d x 72"h
Gas Cylinder Storage Rack Features:
Meets USGS high seismic hazard zone requirements when installed properly
OSHA, NFP1, NFPA 55 and CGA compliant when used properly
Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
2" square steel tube continuously seam welded, 0.125" thick
Holds twelve cylinders, four wide by three deep
Two levels of welded steel chains
10 Pre-drilled 0.531" diameter floor mounting holes
Anchor bolts (Model # ACITW5FS ) available for purchase separately (not included)
Gas cylinder rack includes snaps for each cylinder
Sealed with exterior grade black powder-coat paint
Indoor or outdoor bulk cylinder storage
Made in the USA
Shop By
Shopping Options
Outdoor/Weather Resistant