1 Cylinder Wide - Cylinder Racks and Stands

13 Items

per page
Set Descending Direction
  1. 1 Cylinder - Heavy Duty - Gas Cylinder Stand
    1 Cylinder - Heavy Duty - Gas Cylinder Stand
    USA Safety Model#: GR181FS
    Stand capacity: 1 cylinder
    Cylinder diameters: 4" - 10"
    Stand dimensions (WxDxH): 16"w x 16"d x 15"h

    Gas Cylinder Stand Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • Fully welded cylinder stand
    • Can be used for both commercial and industrial purposes
    • Seven gauge (.187" thick) steel bar
    • Powder-coat paint finish for durability
    • Polypropylene strap and cinch buckle
    • Equipment protected by steel reinforced vinyl edge guards
    • Constructed from eleven gauge and heavier plate steel
    • Mounts to the floor with three 3/8" anchor bolts (not included)
    • Made in the USA
    $220.00
  2. 1 Cylinder - 2 Restraints - Gas Cylinder Stand
    1 Cylinder - 2 Restraints - Gas Cylinder Stand
    USA Safety Model#: GR175FS
    Stand capacity: 1 cylinder
    Cylinder diameters: 4"-12"
    Stand dimensions (WxDxH): 19"w x 13.5"d x 30"h

    Gas Cylinder Stand Features:
    • OSHA, NFPA (UFC) & CGA compliant
    • Two polypropylene straps with cinch buckle
    • Cylinder stand has fully welded construction
    • Made from 11 gauge hot rolled steel
    • Quality powder-coat paint finish for durability and chemical resistance
    • Steel reinforced vinyl edge guards protect equipment
    • Pre-drilled holes for mounting to the floor
    • A chain set (Model # GB105FS) can be added to this product (optional)
    • Industrial and commercial use
    • Ships parcel or larger quantities ship by freight
    • Made in the USA
    $240.00
  3. 1 Cylinder - Basic - Gas Cylinder Rack
    1 Cylinder - Basic - Gas Cylinder Rack
    USA Safety Model#: GRCR1SC
    Cylinder capacity: 1
    Cylinder diameters supported: Up to 9.5"
    Cylinder rack dimensions (WxDxH): 13"w x 13"d x 36"h

    Cylinder Storage Rack Features:
    • Fully welded 1.5" steel tube
    • Holds one cylinder up to 9.5" in diameter
    • One chain included
    • Pre-drilled 0.5" floor mounting holes on flat iron base
    • Finished with black powder paint
    • Industrial and commercial use
    • Made in the USA
    $525.00
  4. 2 Cylinders - Basic - Gas Cylinder Rack
    2 Cylinders - Basic - Gas Cylinder Rack
    USA Safety Model#: GRCR2SC
    Cylinder capacity: 2
    Cylinder diameters supported: Up to 9.5"
    Cylinder rack dimensions (WxDxH): 13"w x 21.5"d x 36"h

    Cylinder Storage Rack Features:
    • Fully welded 1.5" steel tube
    • Holds two cylinders up to 9.5" in diameter
    • One chain included
    • Pre-drilled 0.5" floor mounting holes on flat iron base
    • Finished with black powder paint
    • Industrial and commercial use
    • Made in the USA
    $540.00
  5. 1 Cylinder (1x1) - Barricade - Gas Cylinder Rack
    1 Cylinder (1x1) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR1X1FS
    Cylinder capacity: 1
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 16"w x 16"d x 30"h

    Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds one cylinder
    • Two levels of welded steel chains
    • 3 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade Black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Industrial and commercial use
    • Made in the USA
    $690.00
  6. 1 Cryogenic Tank (22" Dewar) - Liquid Gas Cylinder Rack
    1 Cryogenic Tank (22" Dewar) - Liquid Gas Cylinder Rack
    USA Safety Model#: BR1X1CRYO22
    Cylinder capacity: 1
    Cylinder diameters supported: 18"-22"
    Cylinder rack dimensions (WxDxH): 28"w x 26"d x 40"h

    Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Typically used for cryogenic gases
    • 2 levels of welded and steel chains
    • Snaps to secure cylinder
    • 2" square steel tube continuously seam welded, 0.125" thick surrounds cylinders
    • 4 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Tube sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Industrial and commercial use
    • Made in the USA
    $750.00
  7. 2 Cylinders (1x2) - Barricade - Gas Cylinder Rack
    2 Cylinders (1x2) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR1X2FS
    Cylinder capacity: 1-2
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 16"w x 26"d x 30"h

    Gas Tank Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds two cylinders, one wide by two deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 4 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $785.00
  8. 3 Cylinders (1x3) - Barricade - Gas Cylinder Rack
    3 Cylinders (1x3) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR1X3FS
    Cylinder capacity: 1-3
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 16"w x 38"d x 30"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds three cylinders, one wide by three deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 4 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $865.00
  9. 2 Cylinders (1x2) - Barricade - Process Station - Gas Cylinder Rack
    2 Cylinders (1x2) - Barricade - Process Station - Gas Cylinder Rack
    USA Safety Model#: BR1X2PSFS
    Cylinder capacity: 1-2
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 16"w x 26"d x 72"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds two cylinders, one wide by two deep
    • Two levels of welded steel chains
    • 4 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Gas cylinder rack includes snaps for each cylinder
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $925.00
  10. 1 Propane Tank (20-100lb) - Adjustable Shelf - Gas Cylinder Vise
    1 Propane Tank (20-100lb) - Adjustable Shelf - Gas Cylinder Vise
    USA Safety Model#: GRACVAM
    Stand capacity: 1 cylinder
    Cylinder diameters: 12"-15"
    Stand dimensions (WxDxH): 13"w x 14"d x 36"h

    Gas Cylinder Stand Features:
    • Made from high quality aluminum
    • Mounts to the floor or the wall
    • Adjustable shelf made from aluminum diamond plate
    • 5,000 lb tested nylon ratchet strap included
    • High density, no-maring cushion pads for cylinder to press against
    • Use as a vice when replacing cylinder valves
    • Industrial and commercial use
    • Made in the USA
    $970.00
  11. 4 Cylinders (1x4) - Barricade - Gas Cylinder Rack
    4 Cylinders (1x4) - Barricade - Gas Cylinder Rack
    USA Safety Model#: BR1X4FS
    Cylinder capacity: 1-4
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 16"w x 50"d x 30"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds four cylinders, one wide by four deep
    • Two levels of welded steel chains
    • Snaps for each cylinder
    • 4 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Gas cylinder rack sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $985.00
  12. 1 Cryogenic Tank (33" Dewar) - Liquid Gas Cylinder Rack
    1 Cryogenic Tank (33" Dewar) - Liquid Gas Cylinder Rack
    USA Safety Model#: BR1X1CRYO33
    Cylinder capacity: 1
    Cylinder diameters supported: 18-33"
    Cylinder rack dimensions (WxDxH): 38"w x 36"d x 40"h

    Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Typically used for cryogenic gases in dewar tanks
    • 2 levels of welded and steel chains
    • Snaps to secure cylinder
    • 4 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • 2" square steel tube continuously seam welded, 0.125" thick surrounds cylinders
    • Tube sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Industrial and commercial use
    • Made in the USA
    $990.00
  13. 3 Cylinders (1x3) - Barricade - Process Station - Gas Cylinder Rack
    3 Cylinders (1x3) - Barricade - Process Station - Gas Cylinder Rack
    USA Safety Model#: BR1X3PSFS
    Cylinder capacity: 1-3
    Cylinder diameters supported: Up to 12"
    Cylinder rack dimensions (WxDxH): 16"w x 38"d x 72"h

    Gas Cylinder Storage Rack Features:
    • Meets USGS high seismic hazard zone requirements when installed properly
    • OSHA, NFP1, NFPA 55 and CGA compliant when used properly
    • Process Station: 2 strut mounting rails at 67 and 72 inch height from the floor
    • 2" square steel tube continuously seam welded, 0.125" thick
    • Holds three cylinders, one wide by three deep
    • Two levels of welded steel chains
    • 4 Pre-drilled 0.531" diameter floor mounting holes
    • Anchor bolts (Model # ACITW5FS) available for purchase separately (not included)
    • Gas cylinder rack includes snaps for each cylinder
    • Sealed with exterior grade black powder-coat paint
    • Indoor or outdoor bulk cylinder storage
    • Made in the USA
    $1,075.00

13 Items

per page
Set Descending Direction
Clear All